http://lucene.apache.org/lucene-parent/lucene-core: Apache Lucene Java Core (The Apache Software Foundation) 
/*
 * Licensed to the Apache Software Foundation (ASF) under one or more
 * contributor license agreements.  See the NOTICE file distributed with
 * this work for additional information regarding copyright ownership.
 * The ASF licenses this file to You under the Apache License, Version 2.0
 * (the "License"); you may not use this file except in compliance with
 * the License.  You may obtain a copy of the License at
 *
 *     http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */
package org.apache.lucene.util;


import java.io.DataInputStream;
import java.math.BigInteger;
import java.nio.file.Files;
import java.nio.file.Paths;
import java.util.Arrays;
import java.util.Properties;


Methods for manipulating strings.

@lucene.internal
/**
 * Methods for manipulating strings.
 *
 * @lucene.internal
 */
public abstract class StringHelper {

  
Compares two BytesRef, element by element, and returns the number of elements common to both arrays (from the start of each). This method assumes currentTerm comes after priorTerm. 
Params:
  • priorTerm – The first BytesRef to compare
  • currentTerm – The second BytesRef to compare
Returns:The number of common elements (from the start of each).
/**
   * Compares two {@link BytesRef}, element by element, and returns the
   * number of elements common to both arrays (from the start of each).
   * This method assumes currentTerm comes after priorTerm.
   *
   * @param priorTerm The first {@link BytesRef} to compare
   * @param currentTerm The second {@link BytesRef} to compare
   * @return The number of common elements (from the start of each).
   */
  public static int bytesDifference(BytesRef priorTerm, BytesRef currentTerm) {
    int mismatch = FutureArrays.mismatch(priorTerm.bytes, priorTerm.offset, priorTerm.offset + priorTerm.length, 
                                         currentTerm.bytes, currentTerm.offset, currentTerm.offset + currentTerm.length);
    if (mismatch < 0) {
      throw new IllegalArgumentException("terms out of order: priorTerm=" + priorTerm + ",currentTerm=" + currentTerm);
    }
    return mismatch;
  }
  
  
Returns the length of currentTerm needed for use as a sort key. so that BytesRef.compareTo(BytesRef) still returns the same result. This method assumes currentTerm comes after priorTerm. 
/** 
   * Returns the length of {@code currentTerm} needed for use as a sort key.
   * so that {@link BytesRef#compareTo(BytesRef)} still returns the same result.
   * This method assumes currentTerm comes after priorTerm.
   */
  public static int sortKeyLength(final BytesRef priorTerm, final BytesRef currentTerm) {
    return bytesDifference(priorTerm, currentTerm) + 1;
  }

  private StringHelper() {
  }

  
Returns true iff the ref starts with the given prefix.
Otherwise false.

Params:
  • ref –  the byte[] to test
  • prefix – 
        the expected prefix
Returns:Returns true iff the ref starts with the given prefix.
        Otherwise false.
/**
   * Returns <code>true</code> iff the ref starts with the given prefix.
   * Otherwise <code>false</code>.
   * 
   * @param ref
   *         the {@code byte[]} to test
   * @param prefix
   *         the expected prefix
   * @return Returns <code>true</code> iff the ref starts with the given prefix.
   *         Otherwise <code>false</code>.
   */
  public static boolean startsWith(byte[] ref, BytesRef prefix) {
    // not long enough to start with the prefix
    if (ref.length < prefix.length) {
      return false;
    }
    return FutureArrays.equals(ref, 0, prefix.length,
                               prefix.bytes, prefix.offset, prefix.offset + prefix.length);
  }

  
Returns true iff the ref starts with the given prefix.
Otherwise false.

Params:
  • ref –  the BytesRef to test
  • prefix – 
         the expected prefix
Returns:Returns true iff the ref starts with the given prefix.
        Otherwise false.
/**
   * Returns <code>true</code> iff the ref starts with the given prefix.
   * Otherwise <code>false</code>.
   * 
   * @param ref
   *          the {@link BytesRef} to test
   * @param prefix
   *          the expected prefix
   * @return Returns <code>true</code> iff the ref starts with the given prefix.
   *         Otherwise <code>false</code>.
   */
  public static boolean startsWith(BytesRef ref, BytesRef prefix) {
    // not long enough to start with the prefix
    if (ref.length < prefix.length) {
      return false;
    }
    return FutureArrays.equals(ref.bytes, ref.offset, ref.offset + prefix.length, 
                               prefix.bytes, prefix.offset, prefix.offset + prefix.length);
  }

  
Returns true iff the ref ends with the given suffix. Otherwise
false.

Params:
  • ref –  the BytesRef to test
  • suffix – 
         the expected suffix
Returns:Returns true iff the ref ends with the given suffix.
        Otherwise false.
/**
   * Returns <code>true</code> iff the ref ends with the given suffix. Otherwise
   * <code>false</code>.
   * 
   * @param ref
   *          the {@link BytesRef} to test
   * @param suffix
   *          the expected suffix
   * @return Returns <code>true</code> iff the ref ends with the given suffix.
   *         Otherwise <code>false</code>.
   */
  public static boolean endsWith(BytesRef ref, BytesRef suffix) {
    int startAt = ref.length - suffix.length;
    // not long enough to start with the suffix
    if (startAt < 0) {
      return false;
    }
    return FutureArrays.equals(ref.bytes, ref.offset + startAt, ref.offset + startAt + suffix.length,
                               suffix.bytes, suffix.offset, suffix.offset + suffix.length);
  }

  
Pass this as the seed to murmurhash3_x86_32. 
/** Pass this as the seed to {@link #murmurhash3_x86_32}. */

  // Poached from Guava: set a different salt/seed
  // for each JVM instance, to frustrate hash key collision
  // denial of service attacks, and to catch any places that
  // somehow rely on hash function/order across JVM
  // instances:
  public static final int GOOD_FAST_HASH_SEED;

  static {
    String prop = System.getProperty("tests.seed");
    if (prop != null) {
      // So if there is a test failure that relied on hash
      // order, we remain reproducible based on the test seed:
      GOOD_FAST_HASH_SEED = prop.hashCode();
    } else {
      GOOD_FAST_HASH_SEED = (int) System.currentTimeMillis();
    }
  }

  
Returns the MurmurHash3_x86_32 hash.
Original source/tests at https://github.com/yonik/java_util/

/** Returns the MurmurHash3_x86_32 hash.
   * Original source/tests at https://github.com/yonik/java_util/
   */
  @SuppressWarnings("fallthrough")
  public static int murmurhash3_x86_32(byte[] data, int offset, int len, int seed) {

    final int c1 = 0xcc9e2d51;
    final int c2 = 0x1b873593;

    int h1 = seed;
    int roundedEnd = offset + (len & 0xfffffffc);  // round down to 4 byte block

    for (int i=offset; i<roundedEnd; i+=4) {
      // little endian load order
      int k1 = (data[i] & 0xff) | ((data[i+1] & 0xff) << 8) | ((data[i+2] & 0xff) << 16) | (data[i+3] << 24);
      k1 *= c1;
      k1 = Integer.rotateLeft(k1, 15);
      k1 *= c2;

      h1 ^= k1;
      h1 = Integer.rotateLeft(h1, 13);
      h1 = h1*5+0xe6546b64;
    }

    // tail
    int k1 = 0;

    switch(len & 0x03) {
      case 3:
        k1 = (data[roundedEnd + 2] & 0xff) << 16;
        // fallthrough
      case 2:
        k1 |= (data[roundedEnd + 1] & 0xff) << 8;
        // fallthrough
      case 1:
        k1 |= (data[roundedEnd] & 0xff);
        k1 *= c1;
        k1 = Integer.rotateLeft(k1, 15);
        k1 *= c2;
        h1 ^= k1;
    }

    // finalization
    h1 ^= len;

    // fmix(h1);
    h1 ^= h1 >>> 16;
    h1 *= 0x85ebca6b;
    h1 ^= h1 >>> 13;
    h1 *= 0xc2b2ae35;
    h1 ^= h1 >>> 16;

    return h1;
  }

  public static int murmurhash3_x86_32(BytesRef bytes, int seed) {
    return murmurhash3_x86_32(bytes.bytes, bytes.offset, bytes.length, seed);
  }

  // Holds 128 bit unsigned value:
  private static BigInteger nextId;
  private static final BigInteger mask128;
  private static final Object idLock = new Object();

  static {
    // 128 bit unsigned mask
    byte[] maskBytes128 = new byte[16];
    Arrays.fill(maskBytes128, (byte) 0xff);
    mask128 = new BigInteger(1, maskBytes128);
    
    String prop = System.getProperty("tests.seed");

    // State for xorshift128:
    long x0;
    long x1;

    if (prop != null) {
      // So if there is a test failure that somehow relied on this id,
      // we remain reproducible based on the test seed:
      if (prop.length() > 8) {
        prop = prop.substring(prop.length()-8);
      }
      x0 = Long.parseLong(prop, 16);
      x1 = x0;
    } else {
      // seed from /dev/urandom, if its available
      try (DataInputStream is = new DataInputStream(Files.newInputStream(Paths.get("/dev/urandom")))) {
        x0 = is.readLong();
        x1 = is.readLong();
      } catch (Exception unavailable) {
        // may not be available on this platform
        // fall back to lower quality randomness from 3 different sources:
        x0 = System.nanoTime();
        x1 = StringHelper.class.hashCode() << 32;
        
        StringBuilder sb = new StringBuilder();
        // Properties can vary across JVM instances:
        try {
          Properties p = System.getProperties();
          for (String s: p.stringPropertyNames()) {
            sb.append(s);
            sb.append(p.getProperty(s));
          }
          x1 |= sb.toString().hashCode();
        } catch (SecurityException notallowed) {
          // getting Properties requires wildcard read-write: may not be allowed
          x1 |= StringBuffer.class.hashCode();
        }
      }
    }

    // Use a few iterations of xorshift128 to scatter the seed
    // in case multiple Lucene instances starting up "near" the same
    // nanoTime, since we use ++ (mod 2^128) for full period cycle:
    for(int i=0;i<10;i++) {
      long s1 = x0;
      long s0 = x1;
      x0 = s0;
      s1 ^= s1 << 23; // a
      x1 = s1 ^ s0 ^ (s1 >>> 17) ^ (s0 >>> 26); // b, c
    }
    
    // 64-bit unsigned mask
    byte[] maskBytes64 = new byte[8];
    Arrays.fill(maskBytes64, (byte) 0xff);
    BigInteger mask64 = new BigInteger(1, maskBytes64);

    // First make unsigned versions of x0, x1:
    BigInteger unsignedX0 = BigInteger.valueOf(x0).and(mask64);
    BigInteger unsignedX1 = BigInteger.valueOf(x1).and(mask64);

    // Concatentate bits of x0 and x1, as unsigned 128 bit integer:
    nextId = unsignedX0.shiftLeft(64).or(unsignedX1);
  }
  
  
length in bytes of an ID 
/** length in bytes of an ID */
  public static final int ID_LENGTH = 16;

  
Generates a non-cryptographic globally unique id. 
/** Generates a non-cryptographic globally unique id. */
  public static byte[] randomId() {

    // NOTE: we don't use Java's UUID.randomUUID() implementation here because:
    //
    //   * It's overkill for our usage: it tries to be cryptographically
    //     secure, whereas for this use we don't care if someone can
    //     guess the IDs.
    //
    //   * It uses SecureRandom, which on Linux can easily take a long time
    //     (I saw ~ 10 seconds just running a Lucene test) when entropy
    //     harvesting is falling behind.
    //
    //   * It loses a few (6) bits to version and variant and it's not clear
    //     what impact that has on the period, whereas the simple ++ (mod 2^128)
    //     we use here is guaranteed to have the full period.

    byte bits[];
    synchronized(idLock) {
      bits = nextId.toByteArray();
      nextId = nextId.add(BigInteger.ONE).and(mask128);
    }
    
    // toByteArray() always returns a sign bit, so it may require an extra byte (always zero)
    if (bits.length > ID_LENGTH) {
      assert bits.length == ID_LENGTH + 1;
      assert bits[0] == 0;
      return ArrayUtil.copyOfSubArray(bits, 1, bits.length);
    } else {
      byte[] result = new byte[ID_LENGTH];
      System.arraycopy(bits, 0, result, result.length - bits.length, bits.length);
      return result;
    }
  }
  
  
Helper method to render an ID as a string, for debugging

 Returns the string (null) if the id is null. Otherwise, returns a string representation for debugging. Never throws an exception. The returned string may indicate if the id is definitely invalid. 
/** 
   * Helper method to render an ID as a string, for debugging
   * <p>
   * Returns the string {@code (null)} if the id is null.
   * Otherwise, returns a string representation for debugging.
   * Never throws an exception. The returned string may
   * indicate if the id is definitely invalid.
   */
  public static String idToString(byte id[]) {
    if (id == null) {
      return "(null)";
    } else {
      StringBuilder sb = new StringBuilder();
      sb.append(new BigInteger(1, id).toString(Character.MAX_RADIX));
      if (id.length != ID_LENGTH) {
        sb.append(" (INVALID FORMAT)");
      }
      return sb.toString();
    }
  }
  
  
Just converts each int in the incoming IntsRef to each byte in the returned BytesRef, throwing IllegalArgumentException if any int value is out of bounds for a byte. 
/** Just converts each int in the incoming {@link IntsRef} to each byte
   *  in the returned {@link BytesRef}, throwing {@code IllegalArgumentException}
   *  if any int value is out of bounds for a byte. */
  public static BytesRef intsRefToBytesRef(IntsRef ints) {
    byte[] bytes = new byte[ints.length];
    for(int i=0;i<ints.length;i++) {
      int x = ints.ints[ints.offset+i];
      if (x < 0 || x > 255) {
        throw new IllegalArgumentException("int at pos=" + i + " with value=" + x + " is out-of-bounds for byte");
      }
      bytes[i] = (byte) x;
    }

    return new BytesRef(bytes);
  }
}