https://openjdk.java.net/ 
/*
 * Copyright (c) 2012, 2018, Oracle and/or its affiliates. All rights reserved.
 * DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
 *
 * This code is free software; you can redistribute it and/or modify it
 * under the terms of the GNU General Public License version 2 only, as
 * published by the Free Software Foundation.  Oracle designates this
 * particular file as subject to the "Classpath" exception as provided
 * by Oracle in the LICENSE file that accompanied this code.
 *
 * This code is distributed in the hope that it will be useful, but WITHOUT
 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
 * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
 * version 2 for more details (a copy is included in the LICENSE file that
 * accompanied this code).
 *
 * You should have received a copy of the GNU General Public License version
 * 2 along with this work; if not, write to the Free Software Foundation,
 * Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.
 *
 * Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA
 * or visit www.oracle.com if you need additional information or have any
 * questions.
 */

/*
 * This file is available under and governed by the GNU General Public
 * License version 2 only, as published by the Free Software Foundation.
 * However, the following notice accompanied the original version of this
 * file:
 *
 * Copyright (c) 2007-2012, Stephen Colebourne & Michael Nascimento Santos
 *
 * All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions are met:
 *
 *  * Redistributions of source code must retain the above copyright notice,
 *    this list of conditions and the following disclaimer.
 *
 *  * Redistributions in binary form must reproduce the above copyright notice,
 *    this list of conditions and the following disclaimer in the documentation
 *    and/or other materials provided with the distribution.
 *
 *  * Neither the name of JSR-310 nor the names of its contributors
 *    may be used to endorse or promote products derived from this software
 *    without specific prior written permission.
 *
 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
 * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
 * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
 * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
 * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
 * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
 * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
 * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 */
package java.time;

import static java.time.temporal.ChronoField.ERA;
import static java.time.temporal.ChronoField.MONTH_OF_YEAR;
import static java.time.temporal.ChronoField.PROLEPTIC_MONTH;
import static java.time.temporal.ChronoField.YEAR;
import static java.time.temporal.ChronoField.YEAR_OF_ERA;
import static java.time.temporal.ChronoUnit.CENTURIES;
import static java.time.temporal.ChronoUnit.DECADES;
import static java.time.temporal.ChronoUnit.ERAS;
import static java.time.temporal.ChronoUnit.MILLENNIA;
import static java.time.temporal.ChronoUnit.MONTHS;
import static java.time.temporal.ChronoUnit.YEARS;

import java.io.DataInput;
import java.io.DataOutput;
import java.io.IOException;
import java.io.InvalidObjectException;
import java.io.ObjectInputStream;
import java.io.Serializable;
import java.time.chrono.Chronology;
import java.time.chrono.IsoChronology;
import java.time.format.DateTimeFormatter;
import java.time.format.DateTimeFormatterBuilder;
import java.time.format.DateTimeParseException;
import java.time.format.SignStyle;
import java.time.temporal.ChronoField;
import java.time.temporal.ChronoUnit;
import java.time.temporal.Temporal;
import java.time.temporal.TemporalAccessor;
import java.time.temporal.TemporalAdjuster;
import java.time.temporal.TemporalAmount;
import java.time.temporal.TemporalField;
import java.time.temporal.TemporalQueries;
import java.time.temporal.TemporalQuery;
import java.time.temporal.TemporalUnit;
import java.time.temporal.UnsupportedTemporalTypeException;
import java.time.temporal.ValueRange;
import java.util.Objects;


A year-month in the ISO-8601 calendar system, such as 2007-12. 
 YearMonth is an immutable date-time object that represents the combination of a year and month. Any field that can be derived from a year and month, such as quarter-of-year, can be obtained. 
 This class does not store or represent a day, time or time-zone. For example, the value "October 2007" can be stored in a YearMonth. 

The ISO-8601 calendar system is the modern civil calendar system used today
in most of the world. It is equivalent to the proleptic Gregorian calendar
system, in which today's rules for leap years are applied for all time.
For most applications written today, the ISO-8601 rules are entirely suitable.
However, any application that makes use of historical dates, and requires them
to be accurate will find the ISO-8601 approach unsuitable.


This is a value-based class; use of identity-sensitive operations (including reference equality (==), identity hash code, or synchronization) on instances of YearMonth may have unpredictable results and should be avoided. The equals method should be used for comparisons. 
Implementation Requirements:
This class is immutable and thread-safe.
Since:1.8
/**
 * A year-month in the ISO-8601 calendar system, such as {@code 2007-12}.
 * <p>
 * {@code YearMonth} is an immutable date-time object that represents the combination
 * of a year and month. Any field that can be derived from a year and month, such as
 * quarter-of-year, can be obtained.
 * <p>
 * This class does not store or represent a day, time or time-zone.
 * For example, the value "October 2007" can be stored in a {@code YearMonth}.
 * <p>
 * The ISO-8601 calendar system is the modern civil calendar system used today
 * in most of the world. It is equivalent to the proleptic Gregorian calendar
 * system, in which today's rules for leap years are applied for all time.
 * For most applications written today, the ISO-8601 rules are entirely suitable.
 * However, any application that makes use of historical dates, and requires them
 * to be accurate will find the ISO-8601 approach unsuitable.
 *
 * <p>
 * This is a <a href="{@docRoot}/java.base/java/lang/doc-files/ValueBased.html">value-based</a>
 * class; use of identity-sensitive operations (including reference equality
 * ({@code ==}), identity hash code, or synchronization) on instances of
 * {@code YearMonth} may have unpredictable results and should be avoided.
 * The {@code equals} method should be used for comparisons.
 *
 * @implSpec
 * This class is immutable and thread-safe.
 *
 * @since 1.8
 */
public final class YearMonth
        implements Temporal, TemporalAdjuster, Comparable<YearMonth>, Serializable {

    
Serialization version.

/**
     * Serialization version.
     */
    private static final long serialVersionUID = 4183400860270640070L;
    
Parser.

/**
     * Parser.
     */
    private static final DateTimeFormatter PARSER = new DateTimeFormatterBuilder()
        .appendValue(YEAR, 4, 10, SignStyle.EXCEEDS_PAD)
        .appendLiteral('-')
        .appendValue(MONTH_OF_YEAR, 2)
        .toFormatter();

    
The year.

/**
     * The year.
     */
    private final int year;
    
The month-of-year, not null.

/**
     * The month-of-year, not null.
     */
    private final int month;

    //-----------------------------------------------------------------------
    
Obtains the current year-month from the system clock in the default time-zone.

 This will query the system clock in the default time-zone to obtain the current year-month. 

Using this method will prevent the ability to use an alternate clock for testing
because the clock is hard-coded.

Returns:the current year-month using the system clock and default time-zone, not null
/**
     * Obtains the current year-month from the system clock in the default time-zone.
     * <p>
     * This will query the {@link Clock#systemDefaultZone() system clock} in the default
     * time-zone to obtain the current year-month.
     * <p>
     * Using this method will prevent the ability to use an alternate clock for testing
     * because the clock is hard-coded.
     *
     * @return the current year-month using the system clock and default time-zone, not null
     */
    public static YearMonth now() {
        return now(Clock.systemDefaultZone());
    }

    
Obtains the current year-month from the system clock in the specified time-zone.

 This will query the system clock to obtain the current year-month. Specifying the time-zone avoids dependence on the default time-zone. 

Using this method will prevent the ability to use an alternate clock for testing
because the clock is hard-coded.

Params:
  • zone –  the zone ID to use, not null
Returns:the current year-month using the system clock, not null
/**
     * Obtains the current year-month from the system clock in the specified time-zone.
     * <p>
     * This will query the {@link Clock#system(ZoneId) system clock} to obtain the current year-month.
     * Specifying the time-zone avoids dependence on the default time-zone.
     * <p>
     * Using this method will prevent the ability to use an alternate clock for testing
     * because the clock is hard-coded.
     *
     * @param zone  the zone ID to use, not null
     * @return the current year-month using the system clock, not null
     */
    public static YearMonth now(ZoneId zone) {
        return now(Clock.system(zone));
    }

    
Obtains the current year-month from the specified clock.

 This will query the specified clock to obtain the current year-month. Using this method allows the use of an alternate clock for testing. The alternate clock may be introduced using dependency injection. 
Params:
  • clock –  the clock to use, not null
Returns:the current year-month, not null
/**
     * Obtains the current year-month from the specified clock.
     * <p>
     * This will query the specified clock to obtain the current year-month.
     * Using this method allows the use of an alternate clock for testing.
     * The alternate clock may be introduced using {@link Clock dependency injection}.
     *
     * @param clock  the clock to use, not null
     * @return the current year-month, not null
     */
    public static YearMonth now(Clock clock) {
        final LocalDate now = LocalDate.now(clock);  // called once
        return YearMonth.of(now.getYear(), now.getMonth());
    }

    //-----------------------------------------------------------------------
    
Obtains an instance of YearMonth from a year and month. 
Params:
  • year –  the year to represent, from MIN_YEAR to MAX_YEAR
  • month –  the month-of-year to represent, not null
Throws:
Returns:the year-month, not null
/**
     * Obtains an instance of {@code YearMonth} from a year and month.
     *
     * @param year  the year to represent, from MIN_YEAR to MAX_YEAR
     * @param month  the month-of-year to represent, not null
     * @return the year-month, not null
     * @throws DateTimeException if the year value is invalid
     */
    public static YearMonth of(int year, Month month) {
        Objects.requireNonNull(month, "month");
        return of(year, month.getValue());
    }

    
Obtains an instance of YearMonth from a year and month. 
Params:
  • year –  the year to represent, from MIN_YEAR to MAX_YEAR
  • month –  the month-of-year to represent, from 1 (January) to 12 (December)
Throws:
Returns:the year-month, not null
/**
     * Obtains an instance of {@code YearMonth} from a year and month.
     *
     * @param year  the year to represent, from MIN_YEAR to MAX_YEAR
     * @param month  the month-of-year to represent, from 1 (January) to 12 (December)
     * @return the year-month, not null
     * @throws DateTimeException if either field value is invalid
     */
    public static YearMonth of(int year, int month) {
        YEAR.checkValidValue(year);
        MONTH_OF_YEAR.checkValidValue(month);
        return new YearMonth(year, month);
    }

    //-----------------------------------------------------------------------
    
Obtains an instance of YearMonth from a temporal object. 
 This obtains a year-month based on the specified temporal. A TemporalAccessor represents an arbitrary set of date and time information, which this factory converts to an instance of YearMonth. 
 The conversion extracts the YEAR and MONTH_OF_YEAR fields. The extraction is only permitted if the temporal object has an ISO chronology, or can be converted to a LocalDate. 
 This method matches the signature of the functional interface TemporalQuery allowing it to be used as a query via method reference, YearMonth::from. 
Params:
  • temporal –  the temporal object to convert, not null
Throws:
Returns:the year-month, not null
/**
     * Obtains an instance of {@code YearMonth} from a temporal object.
     * <p>
     * This obtains a year-month based on the specified temporal.
     * A {@code TemporalAccessor} represents an arbitrary set of date and time information,
     * which this factory converts to an instance of {@code YearMonth}.
     * <p>
     * The conversion extracts the {@link ChronoField#YEAR YEAR} and
     * {@link ChronoField#MONTH_OF_YEAR MONTH_OF_YEAR} fields.
     * The extraction is only permitted if the temporal object has an ISO
     * chronology, or can be converted to a {@code LocalDate}.
     * <p>
     * This method matches the signature of the functional interface {@link TemporalQuery}
     * allowing it to be used as a query via method reference, {@code YearMonth::from}.
     *
     * @param temporal  the temporal object to convert, not null
     * @return the year-month, not null
     * @throws DateTimeException if unable to convert to a {@code YearMonth}
     */
    public static YearMonth from(TemporalAccessor temporal) {
        if (temporal instanceof YearMonth) {
            return (YearMonth) temporal;
        }
        Objects.requireNonNull(temporal, "temporal");
        try {
            if (IsoChronology.INSTANCE.equals(Chronology.from(temporal)) == false) {
                temporal = LocalDate.from(temporal);
            }
            return of(temporal.get(YEAR), temporal.get(MONTH_OF_YEAR));
        } catch (DateTimeException ex) {
            throw new DateTimeException("Unable to obtain YearMonth from TemporalAccessor: " +
                    temporal + " of type " + temporal.getClass().getName(), ex);
        }
    }

    //-----------------------------------------------------------------------
    
Obtains an instance of YearMonth from a text string such as 2007-12. 
 The string must represent a valid year-month. The format must be uuuu-MM. Years outside the range 0000 to 9999 must be prefixed by the plus or minus symbol. 
Params:
  • text –  the text to parse such as "2007-12", not null
Throws:
Returns:the parsed year-month, not null
/**
     * Obtains an instance of {@code YearMonth} from a text string such as {@code 2007-12}.
     * <p>
     * The string must represent a valid year-month.
     * The format must be {@code uuuu-MM}.
     * Years outside the range 0000 to 9999 must be prefixed by the plus or minus symbol.
     *
     * @param text  the text to parse such as "2007-12", not null
     * @return the parsed year-month, not null
     * @throws DateTimeParseException if the text cannot be parsed
     */
    public static YearMonth parse(CharSequence text) {
        return parse(text, PARSER);
    }

    
Obtains an instance of YearMonth from a text string using a specific formatter. 

The text is parsed using the formatter, returning a year-month.

Params:
  • text –  the text to parse, not null
  • formatter –  the formatter to use, not null
Throws:
Returns:the parsed year-month, not null
/**
     * Obtains an instance of {@code YearMonth} from a text string using a specific formatter.
     * <p>
     * The text is parsed using the formatter, returning a year-month.
     *
     * @param text  the text to parse, not null
     * @param formatter  the formatter to use, not null
     * @return the parsed year-month, not null
     * @throws DateTimeParseException if the text cannot be parsed
     */
    public static YearMonth parse(CharSequence text, DateTimeFormatter formatter) {
        Objects.requireNonNull(formatter, "formatter");
        return formatter.parse(text, YearMonth::from);
    }

    //-----------------------------------------------------------------------
    
Constructor.

Params:
  • year –  the year to represent, validated from MIN_YEAR to MAX_YEAR
  • month –  the month-of-year to represent, validated from 1 (January) to 12 (December)
/**
     * Constructor.
     *
     * @param year  the year to represent, validated from MIN_YEAR to MAX_YEAR
     * @param month  the month-of-year to represent, validated from 1 (January) to 12 (December)
     */
    private YearMonth(int year, int month) {
        this.year = year;
        this.month = month;
    }

    
Returns a copy of this year-month with the new year and month, checking
to see if a new object is in fact required.

Params:
  • newYear –  the year to represent, validated from MIN_YEAR to MAX_YEAR
  • newMonth –  the month-of-year to represent, validated not null
Returns:the year-month, not null
/**
     * Returns a copy of this year-month with the new year and month, checking
     * to see if a new object is in fact required.
     *
     * @param newYear  the year to represent, validated from MIN_YEAR to MAX_YEAR
     * @param newMonth  the month-of-year to represent, validated not null
     * @return the year-month, not null
     */
    private YearMonth with(int newYear, int newMonth) {
        if (year == newYear && month == newMonth) {
            return this;
        }
        return new YearMonth(newYear, newMonth);
    }

    //-----------------------------------------------------------------------
    
Checks if the specified field is supported.

 This checks if this year-month can be queried for the specified field. If false, then calling the range, get and with(TemporalField, long) methods will throw an exception. 
 If the field is a ChronoField then the query is implemented here. The supported fields are: 
    

  • MONTH_OF_YEAR 
  • PROLEPTIC_MONTH 
  • YEAR_OF_ERA 
  • YEAR 
  • ERA 
 All other ChronoField instances will return false. 
 If the field is not a ChronoField, then the result of this method is obtained by invoking TemporalField.isSupportedBy(TemporalAccessor) passing this as the argument. Whether the field is supported is determined by the field. 
Params:
  • field –  the field to check, null returns false
Returns:true if the field is supported on this year-month, false if not
/**
     * Checks if the specified field is supported.
     * <p>
     * This checks if this year-month can be queried for the specified field.
     * If false, then calling the {@link #range(TemporalField) range},
     * {@link #get(TemporalField) get} and {@link #with(TemporalField, long)}
     * methods will throw an exception.
     * <p>
     * If the field is a {@link ChronoField} then the query is implemented here.
     * The supported fields are:
     * <ul>
     * <li>{@code MONTH_OF_YEAR}
     * <li>{@code PROLEPTIC_MONTH}
     * <li>{@code YEAR_OF_ERA}
     * <li>{@code YEAR}
     * <li>{@code ERA}
     * </ul>
     * All other {@code ChronoField} instances will return false.
     * <p>
     * If the field is not a {@code ChronoField}, then the result of this method
     * is obtained by invoking {@code TemporalField.isSupportedBy(TemporalAccessor)}
     * passing {@code this} as the argument.
     * Whether the field is supported is determined by the field.
     *
     * @param field  the field to check, null returns false
     * @return true if the field is supported on this year-month, false if not
     */
    @Override
    public boolean isSupported(TemporalField field) {
        if (field instanceof ChronoField) {
            return field == YEAR || field == MONTH_OF_YEAR ||
                    field == PROLEPTIC_MONTH || field == YEAR_OF_ERA || field == ERA;
        }
        return field != null && field.isSupportedBy(this);
    }

    
Checks if the specified unit is supported.

 This checks if the specified unit can be added to, or subtracted from, this year-month. If false, then calling the plus(long, TemporalUnit) and minus methods will throw an exception. 
 If the unit is a ChronoUnit then the query is implemented here. The supported units are: 
    

  • MONTHS 
  • YEARS 
  • DECADES 
  • CENTURIES 
  • MILLENNIA 
  • ERAS 
 All other ChronoUnit instances will return false. 
 If the unit is not a ChronoUnit, then the result of this method is obtained by invoking TemporalUnit.isSupportedBy(Temporal) passing this as the argument. Whether the unit is supported is determined by the unit. 
Params:
  • unit –  the unit to check, null returns false
Returns:true if the unit can be added/subtracted, false if not
/**
     * Checks if the specified unit is supported.
     * <p>
     * This checks if the specified unit can be added to, or subtracted from, this year-month.
     * If false, then calling the {@link #plus(long, TemporalUnit)} and
     * {@link #minus(long, TemporalUnit) minus} methods will throw an exception.
     * <p>
     * If the unit is a {@link ChronoUnit} then the query is implemented here.
     * The supported units are:
     * <ul>
     * <li>{@code MONTHS}
     * <li>{@code YEARS}
     * <li>{@code DECADES}
     * <li>{@code CENTURIES}
     * <li>{@code MILLENNIA}
     * <li>{@code ERAS}
     * </ul>
     * All other {@code ChronoUnit} instances will return false.
     * <p>
     * If the unit is not a {@code ChronoUnit}, then the result of this method
     * is obtained by invoking {@code TemporalUnit.isSupportedBy(Temporal)}
     * passing {@code this} as the argument.
     * Whether the unit is supported is determined by the unit.
     *
     * @param unit  the unit to check, null returns false
     * @return true if the unit can be added/subtracted, false if not
     */
    @Override
    public boolean isSupported(TemporalUnit unit) {
        if (unit instanceof ChronoUnit) {
            return unit == MONTHS || unit == YEARS || unit == DECADES || unit == CENTURIES || unit == MILLENNIA || unit == ERAS;
        }
        return unit != null && unit.isSupportedBy(this);
    }

    //-----------------------------------------------------------------------
    
Gets the range of valid values for the specified field.


The range object expresses the minimum and maximum valid values for a field.
This year-month is used to enhance the accuracy of the returned range.
If it is not possible to return the range, because the field is not supported
or for some other reason, an exception is thrown.

 If the field is a ChronoField then the query is implemented here. The supported fields will return appropriate range instances. All other ChronoField instances will throw an UnsupportedTemporalTypeException. 
 If the field is not a ChronoField, then the result of this method is obtained by invoking TemporalField.rangeRefinedBy(TemporalAccessor) passing this as the argument. Whether the range can be obtained is determined by the field. 
Params:
  • field –  the field to query the range for, not null
Throws:
Returns:the range of valid values for the field, not null
/**
     * Gets the range of valid values for the specified field.
     * <p>
     * The range object expresses the minimum and maximum valid values for a field.
     * This year-month is used to enhance the accuracy of the returned range.
     * If it is not possible to return the range, because the field is not supported
     * or for some other reason, an exception is thrown.
     * <p>
     * If the field is a {@link ChronoField} then the query is implemented here.
     * The {@link #isSupported(TemporalField) supported fields} will return
     * appropriate range instances.
     * All other {@code ChronoField} instances will throw an {@code UnsupportedTemporalTypeException}.
     * <p>
     * If the field is not a {@code ChronoField}, then the result of this method
     * is obtained by invoking {@code TemporalField.rangeRefinedBy(TemporalAccessor)}
     * passing {@code this} as the argument.
     * Whether the range can be obtained is determined by the field.
     *
     * @param field  the field to query the range for, not null
     * @return the range of valid values for the field, not null
     * @throws DateTimeException if the range for the field cannot be obtained
     * @throws UnsupportedTemporalTypeException if the field is not supported
     */
    @Override
    public ValueRange range(TemporalField field) {
        if (field == YEAR_OF_ERA) {
            return (getYear() <= 0 ? ValueRange.of(1, Year.MAX_VALUE + 1) : ValueRange.of(1, Year.MAX_VALUE));
        }
        return Temporal.super.range(field);
    }

    
Gets the value of the specified field from this year-month as an int. 

This queries this year-month for the value of the specified field.
The returned value will always be within the valid range of values for the field.
If it is not possible to return the value, because the field is not supported
or for some other reason, an exception is thrown.

 If the field is a ChronoField then the query is implemented here. The supported fields will return valid values based on this year-month, except PROLEPTIC_MONTH which is too large to fit in an int and throw a DateTimeException. All other ChronoField instances will throw an UnsupportedTemporalTypeException. 
 If the field is not a ChronoField, then the result of this method is obtained by invoking TemporalField.getFrom(TemporalAccessor) passing this as the argument. Whether the value can be obtained, and what the value represents, is determined by the field. 
Params:
  • field –  the field to get, not null
Throws:
Returns:the value for the field
/**
     * Gets the value of the specified field from this year-month as an {@code int}.
     * <p>
     * This queries this year-month for the value of the specified field.
     * The returned value will always be within the valid range of values for the field.
     * If it is not possible to return the value, because the field is not supported
     * or for some other reason, an exception is thrown.
     * <p>
     * If the field is a {@link ChronoField} then the query is implemented here.
     * The {@link #isSupported(TemporalField) supported fields} will return valid
     * values based on this year-month, except {@code PROLEPTIC_MONTH} which is too
     * large to fit in an {@code int} and throw a {@code DateTimeException}.
     * All other {@code ChronoField} instances will throw an {@code UnsupportedTemporalTypeException}.
     * <p>
     * If the field is not a {@code ChronoField}, then the result of this method
     * is obtained by invoking {@code TemporalField.getFrom(TemporalAccessor)}
     * passing {@code this} as the argument. Whether the value can be obtained,
     * and what the value represents, is determined by the field.
     *
     * @param field  the field to get, not null
     * @return the value for the field
     * @throws DateTimeException if a value for the field cannot be obtained or
     *         the value is outside the range of valid values for the field
     * @throws UnsupportedTemporalTypeException if the field is not supported or
     *         the range of values exceeds an {@code int}
     * @throws ArithmeticException if numeric overflow occurs
     */
    @Override  // override for Javadoc
    public int get(TemporalField field) {
        return range(field).checkValidIntValue(getLong(field), field);
    }

    
Gets the value of the specified field from this year-month as a long. 

This queries this year-month for the value of the specified field.
If it is not possible to return the value, because the field is not supported
or for some other reason, an exception is thrown.

 If the field is a ChronoField then the query is implemented here. The supported fields will return valid values based on this year-month. All other ChronoField instances will throw an UnsupportedTemporalTypeException. 
 If the field is not a ChronoField, then the result of this method is obtained by invoking TemporalField.getFrom(TemporalAccessor) passing this as the argument. Whether the value can be obtained, and what the value represents, is determined by the field. 
Params:
  • field –  the field to get, not null
Throws:
Returns:the value for the field
/**
     * Gets the value of the specified field from this year-month as a {@code long}.
     * <p>
     * This queries this year-month for the value of the specified field.
     * If it is not possible to return the value, because the field is not supported
     * or for some other reason, an exception is thrown.
     * <p>
     * If the field is a {@link ChronoField} then the query is implemented here.
     * The {@link #isSupported(TemporalField) supported fields} will return valid
     * values based on this year-month.
     * All other {@code ChronoField} instances will throw an {@code UnsupportedTemporalTypeException}.
     * <p>
     * If the field is not a {@code ChronoField}, then the result of this method
     * is obtained by invoking {@code TemporalField.getFrom(TemporalAccessor)}
     * passing {@code this} as the argument. Whether the value can be obtained,
     * and what the value represents, is determined by the field.
     *
     * @param field  the field to get, not null
     * @return the value for the field
     * @throws DateTimeException if a value for the field cannot be obtained
     * @throws UnsupportedTemporalTypeException if the field is not supported
     * @throws ArithmeticException if numeric overflow occurs
     */
    @Override
    public long getLong(TemporalField field) {
        if (field instanceof ChronoField) {
            switch ((ChronoField) field) {
                case MONTH_OF_YEAR: return month;
                case PROLEPTIC_MONTH: return getProlepticMonth();
                case YEAR_OF_ERA: return (year < 1 ? 1 - year : year);
                case YEAR: return year;
                case ERA: return (year < 1 ? 0 : 1);
            }
            throw new UnsupportedTemporalTypeException("Unsupported field: " + field);
        }
        return field.getFrom(this);
    }

    private long getProlepticMonth() {
        return (year * 12L + month - 1);
    }

    //-----------------------------------------------------------------------
    
Gets the year field.

 This method returns the primitive int value for the year. 
 The year returned by this method is proleptic as per get(YEAR). 
Returns:the year, from MIN_YEAR to MAX_YEAR
/**
     * Gets the year field.
     * <p>
     * This method returns the primitive {@code int} value for the year.
     * <p>
     * The year returned by this method is proleptic as per {@code get(YEAR)}.
     *
     * @return the year, from MIN_YEAR to MAX_YEAR
     */
    public int getYear() {
        return year;
    }

    
Gets the month-of-year field from 1 to 12.

 This method returns the month as an int from 1 to 12. Application code is frequently clearer if the enum Month is used by calling getMonth(). 
See Also:
Returns:the month-of-year, from 1 to 12
/**
     * Gets the month-of-year field from 1 to 12.
     * <p>
     * This method returns the month as an {@code int} from 1 to 12.
     * Application code is frequently clearer if the enum {@link Month}
     * is used by calling {@link #getMonth()}.
     *
     * @return the month-of-year, from 1 to 12
     * @see #getMonth()
     */
    public int getMonthValue() {
        return month;
    }

    
Gets the month-of-year field using the Month enum. 
 This method returns the enum Month for the month. This avoids confusion as to what int values mean. If you need access to the primitive int value then the enum provides the int value. 
See Also:
Returns:the month-of-year, not null
/**
     * Gets the month-of-year field using the {@code Month} enum.
     * <p>
     * This method returns the enum {@link Month} for the month.
     * This avoids confusion as to what {@code int} values mean.
     * If you need access to the primitive {@code int} value then the enum
     * provides the {@link Month#getValue() int value}.
     *
     * @return the month-of-year, not null
     * @see #getMonthValue()
     */
    public Month getMonth() {
        return Month.of(month);
    }

    //-----------------------------------------------------------------------
    
Checks if the year is a leap year, according to the ISO proleptic
calendar system rules.


This method applies the current rules for leap years across the whole time-line.
In general, a year is a leap year if it is divisible by four without
remainder. However, years divisible by 100, are not leap years, with
the exception of years divisible by 400 which are.


For example, 1904 is a leap year it is divisible by 4.
1900 was not a leap year as it is divisible by 100, however 2000 was a
leap year as it is divisible by 400.


The calculation is proleptic - applying the same rules into the far future and far past.
This is historically inaccurate, but is correct for the ISO-8601 standard.

Returns:true if the year is leap, false otherwise
/**
     * Checks if the year is a leap year, according to the ISO proleptic
     * calendar system rules.
     * <p>
     * This method applies the current rules for leap years across the whole time-line.
     * In general, a year is a leap year if it is divisible by four without
     * remainder. However, years divisible by 100, are not leap years, with
     * the exception of years divisible by 400 which are.
     * <p>
     * For example, 1904 is a leap year it is divisible by 4.
     * 1900 was not a leap year as it is divisible by 100, however 2000 was a
     * leap year as it is divisible by 400.
     * <p>
     * The calculation is proleptic - applying the same rules into the far future and far past.
     * This is historically inaccurate, but is correct for the ISO-8601 standard.
     *
     * @return true if the year is leap, false otherwise
     */
    public boolean isLeapYear() {
        return IsoChronology.INSTANCE.isLeapYear(year);
    }

    
Checks if the day-of-month is valid for this year-month.


This method checks whether this year and month and the input day form
a valid date.

Params:
  • dayOfMonth –  the day-of-month to validate, from 1 to 31, invalid value returns false
Returns:true if the day is valid for this year-month
/**
     * Checks if the day-of-month is valid for this year-month.
     * <p>
     * This method checks whether this year and month and the input day form
     * a valid date.
     *
     * @param dayOfMonth  the day-of-month to validate, from 1 to 31, invalid value returns false
     * @return true if the day is valid for this year-month
     */
    public boolean isValidDay(int dayOfMonth) {
        return dayOfMonth >= 1 && dayOfMonth <= lengthOfMonth();
    }

    
Returns the length of the month, taking account of the year.


This returns the length of the month in days.
For example, a date in January would return 31.

Returns:the length of the month in days, from 28 to 31
/**
     * Returns the length of the month, taking account of the year.
     * <p>
     * This returns the length of the month in days.
     * For example, a date in January would return 31.
     *
     * @return the length of the month in days, from 28 to 31
     */
    public int lengthOfMonth() {
        return getMonth().length(isLeapYear());
    }

    
Returns the length of the year.


This returns the length of the year in days, either 365 or 366.

Returns:366 if the year is leap, 365 otherwise
/**
     * Returns the length of the year.
     * <p>
     * This returns the length of the year in days, either 365 or 366.
     *
     * @return 366 if the year is leap, 365 otherwise
     */
    public int lengthOfYear() {
        return (isLeapYear() ? 366 : 365);
    }

    //-----------------------------------------------------------------------
    
Returns an adjusted copy of this year-month.

 This returns a YearMonth, based on this one, with the year-month adjusted. The adjustment takes place using the specified adjuster strategy object. Read the documentation of the adjuster to understand what adjustment will be made. 

A simple adjuster might simply set the one of the fields, such as the year field.
A more complex adjuster might set the year-month to the next month that
Halley's comet will pass the Earth.

 The result of this method is obtained by invoking the TemporalAdjuster.adjustInto(Temporal) method on the specified adjuster passing this as the argument. 

This instance is immutable and unaffected by this method call.

Params:
  • adjuster – the adjuster to use, not null
Throws:
Returns:a YearMonth based on this with the adjustment made, not null
/**
     * Returns an adjusted copy of this year-month.
     * <p>
     * This returns a {@code YearMonth}, based on this one, with the year-month adjusted.
     * The adjustment takes place using the specified adjuster strategy object.
     * Read the documentation of the adjuster to understand what adjustment will be made.
     * <p>
     * A simple adjuster might simply set the one of the fields, such as the year field.
     * A more complex adjuster might set the year-month to the next month that
     * Halley's comet will pass the Earth.
     * <p>
     * The result of this method is obtained by invoking the
     * {@link TemporalAdjuster#adjustInto(Temporal)} method on the
     * specified adjuster passing {@code this} as the argument.
     * <p>
     * This instance is immutable and unaffected by this method call.
     *
     * @param adjuster the adjuster to use, not null
     * @return a {@code YearMonth} based on {@code this} with the adjustment made, not null
     * @throws DateTimeException if the adjustment cannot be made
     * @throws ArithmeticException if numeric overflow occurs
     */
    @Override
    public YearMonth with(TemporalAdjuster adjuster) {
        return (YearMonth) adjuster.adjustInto(this);
    }

    
Returns a copy of this year-month with the specified field set to a new value.

 This returns a YearMonth, based on this one, with the value for the specified field changed. This can be used to change any supported field, such as the year or month. If it is not possible to set the value, because the field is not supported or for some other reason, an exception is thrown. 
 If the field is a ChronoField then the adjustment is implemented here. The supported fields behave as follows: 
    

  • MONTH_OF_YEAR - Returns a YearMonth with the specified month-of-year. The year will be unchanged. 
  • PROLEPTIC_MONTH - Returns a YearMonth with the specified proleptic-month. This completely replaces the year and month of this object. 
  • YEAR_OF_ERA - Returns a YearMonth with the specified year-of-era The month and era will be unchanged. 
  • YEAR - Returns a YearMonth with the specified year. The month will be unchanged. 
  • ERA - Returns a YearMonth with the specified era. The month and year-of-era will be unchanged. 


 In all cases, if the new value is outside the valid range of values for the field then a DateTimeException will be thrown. 
 All other ChronoField instances will throw an UnsupportedTemporalTypeException. 
 If the field is not a ChronoField, then the result of this method is obtained by invoking TemporalField.adjustInto(Temporal, long) passing this as the argument. In this case, the field determines whether and how to adjust the instant. 

This instance is immutable and unaffected by this method call.

Params:
  • field –  the field to set in the result, not null
  • newValue –  the new value of the field in the result
Throws:
Returns:a YearMonth based on this with the specified field set, not null
/**
     * Returns a copy of this year-month with the specified field set to a new value.
     * <p>
     * This returns a {@code YearMonth}, based on this one, with the value
     * for the specified field changed.
     * This can be used to change any supported field, such as the year or month.
     * If it is not possible to set the value, because the field is not supported or for
     * some other reason, an exception is thrown.
     * <p>
     * If the field is a {@link ChronoField} then the adjustment is implemented here.
     * The supported fields behave as follows:
     * <ul>
     * <li>{@code MONTH_OF_YEAR} -
     *  Returns a {@code YearMonth} with the specified month-of-year.
     *  The year will be unchanged.
     * <li>{@code PROLEPTIC_MONTH} -
     *  Returns a {@code YearMonth} with the specified proleptic-month.
     *  This completely replaces the year and month of this object.
     * <li>{@code YEAR_OF_ERA} -
     *  Returns a {@code YearMonth} with the specified year-of-era
     *  The month and era will be unchanged.
     * <li>{@code YEAR} -
     *  Returns a {@code YearMonth} with the specified year.
     *  The month will be unchanged.
     * <li>{@code ERA} -
     *  Returns a {@code YearMonth} with the specified era.
     *  The month and year-of-era will be unchanged.
     * </ul>
     * <p>
     * In all cases, if the new value is outside the valid range of values for the field
     * then a {@code DateTimeException} will be thrown.
     * <p>
     * All other {@code ChronoField} instances will throw an {@code UnsupportedTemporalTypeException}.
     * <p>
     * If the field is not a {@code ChronoField}, then the result of this method
     * is obtained by invoking {@code TemporalField.adjustInto(Temporal, long)}
     * passing {@code this} as the argument. In this case, the field determines
     * whether and how to adjust the instant.
     * <p>
     * This instance is immutable and unaffected by this method call.
     *
     * @param field  the field to set in the result, not null
     * @param newValue  the new value of the field in the result
     * @return a {@code YearMonth} based on {@code this} with the specified field set, not null
     * @throws DateTimeException if the field cannot be set
     * @throws UnsupportedTemporalTypeException if the field is not supported
     * @throws ArithmeticException if numeric overflow occurs
     */
    @Override
    public YearMonth with(TemporalField field, long newValue) {
        if (field instanceof ChronoField) {
            ChronoField f = (ChronoField) field;
            f.checkValidValue(newValue);
            switch (f) {
                case MONTH_OF_YEAR: return withMonth((int) newValue);
                case PROLEPTIC_MONTH: return plusMonths(newValue - getProlepticMonth());
                case YEAR_OF_ERA: return withYear((int) (year < 1 ? 1 - newValue : newValue));
                case YEAR: return withYear((int) newValue);
                case ERA: return (getLong(ERA) == newValue ? this : withYear(1 - year));
            }
            throw new UnsupportedTemporalTypeException("Unsupported field: " + field);
        }
        return field.adjustInto(this, newValue);
    }

    //-----------------------------------------------------------------------
    
Returns a copy of this YearMonth with the year altered. 

This instance is immutable and unaffected by this method call.

Params:
  • year –  the year to set in the returned year-month, from MIN_YEAR to MAX_YEAR
Throws:
Returns:a YearMonth based on this year-month with the requested year, not null
/**
     * Returns a copy of this {@code YearMonth} with the year altered.
     * <p>
     * This instance is immutable and unaffected by this method call.
     *
     * @param year  the year to set in the returned year-month, from MIN_YEAR to MAX_YEAR
     * @return a {@code YearMonth} based on this year-month with the requested year, not null
     * @throws DateTimeException if the year value is invalid
     */
    public YearMonth withYear(int year) {
        YEAR.checkValidValue(year);
        return with(year, month);
    }

    
Returns a copy of this YearMonth with the month-of-year altered. 

This instance is immutable and unaffected by this method call.

Params:
  • month –  the month-of-year to set in the returned year-month, from 1 (January) to 12 (December)
Throws:
Returns:a YearMonth based on this year-month with the requested month, not null
/**
     * Returns a copy of this {@code YearMonth} with the month-of-year altered.
     * <p>
     * This instance is immutable and unaffected by this method call.
     *
     * @param month  the month-of-year to set in the returned year-month, from 1 (January) to 12 (December)
     * @return a {@code YearMonth} based on this year-month with the requested month, not null
     * @throws DateTimeException if the month-of-year value is invalid
     */
    public YearMonth withMonth(int month) {
        MONTH_OF_YEAR.checkValidValue(month);
        return with(year, month);
    }

    //-----------------------------------------------------------------------
    
Returns a copy of this year-month with the specified amount added.

 This returns a YearMonth, based on this one, with the specified amount added. The amount is typically Period but may be any other type implementing the TemporalAmount interface. 
 The calculation is delegated to the amount object by calling TemporalAmount.addTo(Temporal). The amount implementation is free to implement the addition in any way it wishes, however it typically calls back to plus(long, TemporalUnit). Consult the documentation of the amount implementation to determine if it can be successfully added. 

This instance is immutable and unaffected by this method call.

Params:
  • amountToAdd –  the amount to add, not null
Throws:
Returns:a YearMonth based on this year-month with the addition made, not null
/**
     * Returns a copy of this year-month with the specified amount added.
     * <p>
     * This returns a {@code YearMonth}, based on this one, with the specified amount added.
     * The amount is typically {@link Period} but may be any other type implementing
     * the {@link TemporalAmount} interface.
     * <p>
     * The calculation is delegated to the amount object by calling
     * {@link TemporalAmount#addTo(Temporal)}. The amount implementation is free
     * to implement the addition in any way it wishes, however it typically
     * calls back to {@link #plus(long, TemporalUnit)}. Consult the documentation
     * of the amount implementation to determine if it can be successfully added.
     * <p>
     * This instance is immutable and unaffected by this method call.
     *
     * @param amountToAdd  the amount to add, not null
     * @return a {@code YearMonth} based on this year-month with the addition made, not null
     * @throws DateTimeException if the addition cannot be made
     * @throws ArithmeticException if numeric overflow occurs
     */
    @Override
    public YearMonth plus(TemporalAmount amountToAdd) {
        return (YearMonth) amountToAdd.addTo(this);
    }

    
Returns a copy of this year-month with the specified amount added.

 This returns a YearMonth, based on this one, with the amount in terms of the unit added. If it is not possible to add the amount, because the unit is not supported or for some other reason, an exception is thrown. 
 If the field is a ChronoUnit then the addition is implemented here. The supported fields behave as follows: 
    

  • MONTHS - Returns a YearMonth with the specified number of months added. This is equivalent to plusMonths(long). 
  • YEARS - Returns a YearMonth with the specified number of years added. This is equivalent to plusYears(long). 
  • DECADES - Returns a YearMonth with the specified number of decades added. This is equivalent to calling plusYears(long) with the amount multiplied by 10. 
  • CENTURIES - Returns a YearMonth with the specified number of centuries added. This is equivalent to calling plusYears(long) with the amount multiplied by 100. 
  • MILLENNIA - Returns a YearMonth with the specified number of millennia added. This is equivalent to calling plusYears(long) with the amount multiplied by 1,000. 
  • ERAS - Returns a YearMonth with the specified number of eras added. Only two eras are supported so the amount must be one, zero or minus one. If the amount is non-zero then the year is changed such that the year-of-era is unchanged. 


 All other ChronoUnit instances will throw an UnsupportedTemporalTypeException. 
 If the field is not a ChronoUnit, then the result of this method is obtained by invoking TemporalUnit.addTo(Temporal, long) passing this as the argument. In this case, the unit determines whether and how to perform the addition. 

This instance is immutable and unaffected by this method call.

Params:
  • amountToAdd –  the amount of the unit to add to the result, may be negative
  • unit –  the unit of the amount to add, not null
Throws:
Returns:a YearMonth based on this year-month with the specified amount added, not null
/**
     * Returns a copy of this year-month with the specified amount added.
     * <p>
     * This returns a {@code YearMonth}, based on this one, with the amount
     * in terms of the unit added. If it is not possible to add the amount, because the
     * unit is not supported or for some other reason, an exception is thrown.
     * <p>
     * If the field is a {@link ChronoUnit} then the addition is implemented here.
     * The supported fields behave as follows:
     * <ul>
     * <li>{@code MONTHS} -
     *  Returns a {@code YearMonth} with the specified number of months added.
     *  This is equivalent to {@link #plusMonths(long)}.
     * <li>{@code YEARS} -
     *  Returns a {@code YearMonth} with the specified number of years added.
     *  This is equivalent to {@link #plusYears(long)}.
     * <li>{@code DECADES} -
     *  Returns a {@code YearMonth} with the specified number of decades added.
     *  This is equivalent to calling {@link #plusYears(long)} with the amount
     *  multiplied by 10.
     * <li>{@code CENTURIES} -
     *  Returns a {@code YearMonth} with the specified number of centuries added.
     *  This is equivalent to calling {@link #plusYears(long)} with the amount
     *  multiplied by 100.
     * <li>{@code MILLENNIA} -
     *  Returns a {@code YearMonth} with the specified number of millennia added.
     *  This is equivalent to calling {@link #plusYears(long)} with the amount
     *  multiplied by 1,000.
     * <li>{@code ERAS} -
     *  Returns a {@code YearMonth} with the specified number of eras added.
     *  Only two eras are supported so the amount must be one, zero or minus one.
     *  If the amount is non-zero then the year is changed such that the year-of-era
     *  is unchanged.
     * </ul>
     * <p>
     * All other {@code ChronoUnit} instances will throw an {@code UnsupportedTemporalTypeException}.
     * <p>
     * If the field is not a {@code ChronoUnit}, then the result of this method
     * is obtained by invoking {@code TemporalUnit.addTo(Temporal, long)}
     * passing {@code this} as the argument. In this case, the unit determines
     * whether and how to perform the addition.
     * <p>
     * This instance is immutable and unaffected by this method call.
     *
     * @param amountToAdd  the amount of the unit to add to the result, may be negative
     * @param unit  the unit of the amount to add, not null
     * @return a {@code YearMonth} based on this year-month with the specified amount added, not null
     * @throws DateTimeException if the addition cannot be made
     * @throws UnsupportedTemporalTypeException if the unit is not supported
     * @throws ArithmeticException if numeric overflow occurs
     */
    @Override
    public YearMonth plus(long amountToAdd, TemporalUnit unit) {
        if (unit instanceof ChronoUnit) {
            switch ((ChronoUnit) unit) {
                case MONTHS: return plusMonths(amountToAdd);
                case YEARS: return plusYears(amountToAdd);
                case DECADES: return plusYears(Math.multiplyExact(amountToAdd, 10));
                case CENTURIES: return plusYears(Math.multiplyExact(amountToAdd, 100));
                case MILLENNIA: return plusYears(Math.multiplyExact(amountToAdd, 1000));
                case ERAS: return with(ERA, Math.addExact(getLong(ERA), amountToAdd));
            }
            throw new UnsupportedTemporalTypeException("Unsupported unit: " + unit);
        }
        return unit.addTo(this, amountToAdd);
    }

    
Returns a copy of this YearMonth with the specified number of years added. 

This instance is immutable and unaffected by this method call.

Params:
  • yearsToAdd –  the years to add, may be negative
Throws:
Returns:a YearMonth based on this year-month with the years added, not null
/**
     * Returns a copy of this {@code YearMonth} with the specified number of years added.
     * <p>
     * This instance is immutable and unaffected by this method call.
     *
     * @param yearsToAdd  the years to add, may be negative
     * @return a {@code YearMonth} based on this year-month with the years added, not null
     * @throws DateTimeException if the result exceeds the supported range
     */
    public YearMonth plusYears(long yearsToAdd) {
        if (yearsToAdd == 0) {
            return this;
        }
        int newYear = YEAR.checkValidIntValue(year + yearsToAdd);  // safe overflow
        return with(newYear, month);
    }

    
Returns a copy of this YearMonth with the specified number of months added. 

This instance is immutable and unaffected by this method call.

Params:
  • monthsToAdd –  the months to add, may be negative
Throws:
Returns:a YearMonth based on this year-month with the months added, not null
/**
     * Returns a copy of this {@code YearMonth} with the specified number of months added.
     * <p>
     * This instance is immutable and unaffected by this method call.
     *
     * @param monthsToAdd  the months to add, may be negative
     * @return a {@code YearMonth} based on this year-month with the months added, not null
     * @throws DateTimeException if the result exceeds the supported range
     */
    public YearMonth plusMonths(long monthsToAdd) {
        if (monthsToAdd == 0) {
            return this;
        }
        long monthCount = year * 12L + (month - 1);
        long calcMonths = monthCount + monthsToAdd;  // safe overflow
        int newYear = YEAR.checkValidIntValue(Math.floorDiv(calcMonths, 12));
        int newMonth = Math.floorMod(calcMonths, 12) + 1;
        return with(newYear, newMonth);
    }

    //-----------------------------------------------------------------------
    
Returns a copy of this year-month with the specified amount subtracted.

 This returns a YearMonth, based on this one, with the specified amount subtracted. The amount is typically Period but may be any other type implementing the TemporalAmount interface. 
 The calculation is delegated to the amount object by calling TemporalAmount.subtractFrom(Temporal). The amount implementation is free to implement the subtraction in any way it wishes, however it typically calls back to minus(long, TemporalUnit). Consult the documentation of the amount implementation to determine if it can be successfully subtracted. 

This instance is immutable and unaffected by this method call.

Params:
  • amountToSubtract –  the amount to subtract, not null
Throws:
Returns:a YearMonth based on this year-month with the subtraction made, not null
/**
     * Returns a copy of this year-month with the specified amount subtracted.
     * <p>
     * This returns a {@code YearMonth}, based on this one, with the specified amount subtracted.
     * The amount is typically {@link Period} but may be any other type implementing
     * the {@link TemporalAmount} interface.
     * <p>
     * The calculation is delegated to the amount object by calling
     * {@link TemporalAmount#subtractFrom(Temporal)}. The amount implementation is free
     * to implement the subtraction in any way it wishes, however it typically
     * calls back to {@link #minus(long, TemporalUnit)}. Consult the documentation
     * of the amount implementation to determine if it can be successfully subtracted.
     * <p>
     * This instance is immutable and unaffected by this method call.
     *
     * @param amountToSubtract  the amount to subtract, not null
     * @return a {@code YearMonth} based on this year-month with the subtraction made, not null
     * @throws DateTimeException if the subtraction cannot be made
     * @throws ArithmeticException if numeric overflow occurs
     */
    @Override
    public YearMonth minus(TemporalAmount amountToSubtract) {
        return (YearMonth) amountToSubtract.subtractFrom(this);
    }

    
Returns a copy of this year-month with the specified amount subtracted.

 This returns a YearMonth, based on this one, with the amount in terms of the unit subtracted. If it is not possible to subtract the amount, because the unit is not supported or for some other reason, an exception is thrown. 
 This method is equivalent to plus(long, TemporalUnit) with the amount negated. See that method for a full description of how addition, and thus subtraction, works. 

This instance is immutable and unaffected by this method call.

Params:
  • amountToSubtract –  the amount of the unit to subtract from the result, may be negative
  • unit –  the unit of the amount to subtract, not null
Throws:
Returns:a YearMonth based on this year-month with the specified amount subtracted, not null
/**
     * Returns a copy of this year-month with the specified amount subtracted.
     * <p>
     * This returns a {@code YearMonth}, based on this one, with the amount
     * in terms of the unit subtracted. If it is not possible to subtract the amount,
     * because the unit is not supported or for some other reason, an exception is thrown.
     * <p>
     * This method is equivalent to {@link #plus(long, TemporalUnit)} with the amount negated.
     * See that method for a full description of how addition, and thus subtraction, works.
     * <p>
     * This instance is immutable and unaffected by this method call.
     *
     * @param amountToSubtract  the amount of the unit to subtract from the result, may be negative
     * @param unit  the unit of the amount to subtract, not null
     * @return a {@code YearMonth} based on this year-month with the specified amount subtracted, not null
     * @throws DateTimeException if the subtraction cannot be made
     * @throws UnsupportedTemporalTypeException if the unit is not supported
     * @throws ArithmeticException if numeric overflow occurs
     */
    @Override
    public YearMonth minus(long amountToSubtract, TemporalUnit unit) {
        return (amountToSubtract == Long.MIN_VALUE ? plus(Long.MAX_VALUE, unit).plus(1, unit) : plus(-amountToSubtract, unit));
    }

    
Returns a copy of this YearMonth with the specified number of years subtracted. 

This instance is immutable and unaffected by this method call.

Params:
  • yearsToSubtract –  the years to subtract, may be negative
Throws:
Returns:a YearMonth based on this year-month with the years subtracted, not null
/**
     * Returns a copy of this {@code YearMonth} with the specified number of years subtracted.
     * <p>
     * This instance is immutable and unaffected by this method call.
     *
     * @param yearsToSubtract  the years to subtract, may be negative
     * @return a {@code YearMonth} based on this year-month with the years subtracted, not null
     * @throws DateTimeException if the result exceeds the supported range
     */
    public YearMonth minusYears(long yearsToSubtract) {
        return (yearsToSubtract == Long.MIN_VALUE ? plusYears(Long.MAX_VALUE).plusYears(1) : plusYears(-yearsToSubtract));
    }

    
Returns a copy of this YearMonth with the specified number of months subtracted. 

This instance is immutable and unaffected by this method call.

Params:
  • monthsToSubtract –  the months to subtract, may be negative
Throws:
Returns:a YearMonth based on this year-month with the months subtracted, not null
/**
     * Returns a copy of this {@code YearMonth} with the specified number of months subtracted.
     * <p>
     * This instance is immutable and unaffected by this method call.
     *
     * @param monthsToSubtract  the months to subtract, may be negative
     * @return a {@code YearMonth} based on this year-month with the months subtracted, not null
     * @throws DateTimeException if the result exceeds the supported range
     */
    public YearMonth minusMonths(long monthsToSubtract) {
        return (monthsToSubtract == Long.MIN_VALUE ? plusMonths(Long.MAX_VALUE).plusMonths(1) : plusMonths(-monthsToSubtract));
    }

    //-----------------------------------------------------------------------
    
Queries this year-month using the specified query.

 This queries this year-month using the specified query strategy object. The TemporalQuery object defines the logic to be used to obtain the result. Read the documentation of the query to understand what the result of this method will be. 
 The result of this method is obtained by invoking the TemporalQuery.queryFrom(TemporalAccessor) method on the specified query passing this as the argument. 
Params:
  • query –  the query to invoke, not null
Type parameters:
  • <R> – the type of the result
Throws:
Returns:the query result, null may be returned (defined by the query)
/**
     * Queries this year-month using the specified query.
     * <p>
     * This queries this year-month using the specified query strategy object.
     * The {@code TemporalQuery} object defines the logic to be used to
     * obtain the result. Read the documentation of the query to understand
     * what the result of this method will be.
     * <p>
     * The result of this method is obtained by invoking the
     * {@link TemporalQuery#queryFrom(TemporalAccessor)} method on the
     * specified query passing {@code this} as the argument.
     *
     * @param <R> the type of the result
     * @param query  the query to invoke, not null
     * @return the query result, null may be returned (defined by the query)
     * @throws DateTimeException if unable to query (defined by the query)
     * @throws ArithmeticException if numeric overflow occurs (defined by the query)
     */
    @SuppressWarnings("unchecked")
    @Override
    public <R> R query(TemporalQuery<R> query) {
        if (query == TemporalQueries.chronology()) {
            return (R) IsoChronology.INSTANCE;
        } else if (query == TemporalQueries.precision()) {
            return (R) MONTHS;
        }
        return Temporal.super.query(query);
    }

    
Adjusts the specified temporal object to have this year-month.


This returns a temporal object of the same observable type as the input
with the year and month changed to be the same as this.

 The adjustment is equivalent to using Temporal.with(TemporalField, long) passing ChronoField.PROLEPTIC_MONTH as the field. If the specified temporal object does not use the ISO calendar system then a DateTimeException is thrown. 
 In most cases, it is clearer to reverse the calling pattern by using Temporal.with(TemporalAdjuster): 
  // these two lines are equivalent, but the second approach is recommended
  temporal = thisYearMonth.adjustInto(temporal);
  temporal = temporal.with(thisYearMonth);




This instance is immutable and unaffected by this method call.

Params:
  • temporal –  the target object to be adjusted, not null
Throws:
Returns:the adjusted object, not null
/**
     * Adjusts the specified temporal object to have this year-month.
     * <p>
     * This returns a temporal object of the same observable type as the input
     * with the year and month changed to be the same as this.
     * <p>
     * The adjustment is equivalent to using {@link Temporal#with(TemporalField, long)}
     * passing {@link ChronoField#PROLEPTIC_MONTH} as the field.
     * If the specified temporal object does not use the ISO calendar system then
     * a {@code DateTimeException} is thrown.
     * <p>
     * In most cases, it is clearer to reverse the calling pattern by using
     * {@link Temporal#with(TemporalAdjuster)}:
     * <pre>
     *   // these two lines are equivalent, but the second approach is recommended
     *   temporal = thisYearMonth.adjustInto(temporal);
     *   temporal = temporal.with(thisYearMonth);
     * </pre>
     * <p>
     * This instance is immutable and unaffected by this method call.
     *
     * @param temporal  the target object to be adjusted, not null
     * @return the adjusted object, not null
     * @throws DateTimeException if unable to make the adjustment
     * @throws ArithmeticException if numeric overflow occurs
     */
    @Override
    public Temporal adjustInto(Temporal temporal) {
        if (Chronology.from(temporal).equals(IsoChronology.INSTANCE) == false) {
            throw new DateTimeException("Adjustment only supported on ISO date-time");
        }
        return temporal.with(PROLEPTIC_MONTH, getProlepticMonth());
    }

    
Calculates the amount of time until another year-month in terms of the specified unit.

 This calculates the amount of time between two YearMonth objects in terms of a single TemporalUnit. The start and end points are this and the specified year-month. The result will be negative if the end is before the start. The Temporal passed to this method is converted to a YearMonth using from(TemporalAccessor). For example, the amount in years between two year-months can be calculated using startYearMonth.until(endYearMonth, YEARS). 

The calculation returns a whole number, representing the number of
complete units between the two year-months.
For example, the amount in decades between 2012-06 and 2032-05
will only be one decade as it is one month short of two decades.

 There are two equivalent ways of using this method. The first is to invoke this method. The second is to use TemporalUnit.between(Temporal, Temporal): 
  // these two lines are equivalent
  amount = start.until(end, MONTHS);
  amount = MONTHS.between(start, end);


The choice should be made based on which makes the code more readable.

 The calculation is implemented in this method for ChronoUnit. The units MONTHS, YEARS, DECADES, CENTURIES, MILLENNIA and ERAS are supported. Other ChronoUnit values will throw an exception. 
 If the unit is not a ChronoUnit, then the result of this method is obtained by invoking TemporalUnit.between(Temporal, Temporal) passing this as the first argument and the converted input temporal as the second argument. 

This instance is immutable and unaffected by this method call.

Params:
  • endExclusive –  the end date, exclusive, which is converted to a YearMonth, not null
  • unit –  the unit to measure the amount in, not null
Throws:
Returns:the amount of time between this year-month and the end year-month
/**
     * Calculates the amount of time until another year-month in terms of the specified unit.
     * <p>
     * This calculates the amount of time between two {@code YearMonth}
     * objects in terms of a single {@code TemporalUnit}.
     * The start and end points are {@code this} and the specified year-month.
     * The result will be negative if the end is before the start.
     * The {@code Temporal} passed to this method is converted to a
     * {@code YearMonth} using {@link #from(TemporalAccessor)}.
     * For example, the amount in years between two year-months can be calculated
     * using {@code startYearMonth.until(endYearMonth, YEARS)}.
     * <p>
     * The calculation returns a whole number, representing the number of
     * complete units between the two year-months.
     * For example, the amount in decades between 2012-06 and 2032-05
     * will only be one decade as it is one month short of two decades.
     * <p>
     * There are two equivalent ways of using this method.
     * The first is to invoke this method.
     * The second is to use {@link TemporalUnit#between(Temporal, Temporal)}:
     * <pre>
     *   // these two lines are equivalent
     *   amount = start.until(end, MONTHS);
     *   amount = MONTHS.between(start, end);
     * </pre>
     * The choice should be made based on which makes the code more readable.
     * <p>
     * The calculation is implemented in this method for {@link ChronoUnit}.
     * The units {@code MONTHS}, {@code YEARS}, {@code DECADES},
     * {@code CENTURIES}, {@code MILLENNIA} and {@code ERAS} are supported.
     * Other {@code ChronoUnit} values will throw an exception.
     * <p>
     * If the unit is not a {@code ChronoUnit}, then the result of this method
     * is obtained by invoking {@code TemporalUnit.between(Temporal, Temporal)}
     * passing {@code this} as the first argument and the converted input temporal
     * as the second argument.
     * <p>
     * This instance is immutable and unaffected by this method call.
     *
     * @param endExclusive  the end date, exclusive, which is converted to a {@code YearMonth}, not null
     * @param unit  the unit to measure the amount in, not null
     * @return the amount of time between this year-month and the end year-month
     * @throws DateTimeException if the amount cannot be calculated, or the end
     *  temporal cannot be converted to a {@code YearMonth}
     * @throws UnsupportedTemporalTypeException if the unit is not supported
     * @throws ArithmeticException if numeric overflow occurs
     */
    @Override
    public long until(Temporal endExclusive, TemporalUnit unit) {
        YearMonth end = YearMonth.from(endExclusive);
        if (unit instanceof ChronoUnit) {
            long monthsUntil = end.getProlepticMonth() - getProlepticMonth();  // no overflow
            switch ((ChronoUnit) unit) {
                case MONTHS: return monthsUntil;
                case YEARS: return monthsUntil / 12;
                case DECADES: return monthsUntil / 120;
                case CENTURIES: return monthsUntil / 1200;
                case MILLENNIA: return monthsUntil / 12000;
                case ERAS: return end.getLong(ERA) - getLong(ERA);
            }
            throw new UnsupportedTemporalTypeException("Unsupported unit: " + unit);
        }
        return unit.between(this, end);
    }

    
Formats this year-month using the specified formatter.


This year-month will be passed to the formatter to produce a string.

Params:
  • formatter –  the formatter to use, not null
Throws:
Returns:the formatted year-month string, not null
/**
     * Formats this year-month using the specified formatter.
     * <p>
     * This year-month will be passed to the formatter to produce a string.
     *
     * @param formatter  the formatter to use, not null
     * @return the formatted year-month string, not null
     * @throws DateTimeException if an error occurs during printing
     */
    public String format(DateTimeFormatter formatter) {
        Objects.requireNonNull(formatter, "formatter");
        return formatter.format(this);
    }

    //-----------------------------------------------------------------------
    
Combines this year-month with a day-of-month to create a LocalDate. 
 This returns a LocalDate formed from this year-month and the specified day-of-month. 

The day-of-month value must be valid for the year-month.


This method can be used as part of a chain to produce a date:

 LocalDate date = year.atMonth(month).atDay(day);



Params:
  • dayOfMonth –  the day-of-month to use, from 1 to 31
Throws:
See Also:
Returns:the date formed from this year-month and the specified day, not null
/**
     * Combines this year-month with a day-of-month to create a {@code LocalDate}.
     * <p>
     * This returns a {@code LocalDate} formed from this year-month and the specified day-of-month.
     * <p>
     * The day-of-month value must be valid for the year-month.
     * <p>
     * This method can be used as part of a chain to produce a date:
     * <pre>
     *  LocalDate date = year.atMonth(month).atDay(day);
     * </pre>
     *
     * @param dayOfMonth  the day-of-month to use, from 1 to 31
     * @return the date formed from this year-month and the specified day, not null
     * @throws DateTimeException if the day is invalid for the year-month
     * @see #isValidDay(int)
     */
    public LocalDate atDay(int dayOfMonth) {
        return LocalDate.of(year, month, dayOfMonth);
    }

    
Returns a LocalDate at the end of the month. 
 This returns a LocalDate based on this year-month. The day-of-month is set to the last valid day of the month, taking into account leap years. 

This method can be used as part of a chain to produce a date:

 LocalDate date = year.atMonth(month).atEndOfMonth();



Returns:the last valid date of this year-month, not null
/**
     * Returns a {@code LocalDate} at the end of the month.
     * <p>
     * This returns a {@code LocalDate} based on this year-month.
     * The day-of-month is set to the last valid day of the month, taking
     * into account leap years.
     * <p>
     * This method can be used as part of a chain to produce a date:
     * <pre>
     *  LocalDate date = year.atMonth(month).atEndOfMonth();
     * </pre>
     *
     * @return the last valid date of this year-month, not null
     */
    public LocalDate atEndOfMonth() {
        return LocalDate.of(year, month, lengthOfMonth());
    }

    //-----------------------------------------------------------------------
    
Compares this year-month to another year-month.

 The comparison is based first on the value of the year, then on the value of the month. It is "consistent with equals", as defined by Comparable. 
Params:
  • other –  the other year-month to compare to, not null
Returns:the comparator value, negative if less, positive if greater
/**
     * Compares this year-month to another year-month.
     * <p>
     * The comparison is based first on the value of the year, then on the value of the month.
     * It is "consistent with equals", as defined by {@link Comparable}.
     *
     * @param other  the other year-month to compare to, not null
     * @return the comparator value, negative if less, positive if greater
     */
    @Override
    public int compareTo(YearMonth other) {
        int cmp = (year - other.year);
        if (cmp == 0) {
            cmp = (month - other.month);
        }
        return cmp;
    }

    
Checks if this year-month is after the specified year-month.

Params:
  • other –  the other year-month to compare to, not null
Returns:true if this is after the specified year-month
/**
     * Checks if this year-month is after the specified year-month.
     *
     * @param other  the other year-month to compare to, not null
     * @return true if this is after the specified year-month
     */
    public boolean isAfter(YearMonth other) {
        return compareTo(other) > 0;
    }

    
Checks if this year-month is before the specified year-month.

Params:
  • other –  the other year-month to compare to, not null
Returns:true if this point is before the specified year-month
/**
     * Checks if this year-month is before the specified year-month.
     *
     * @param other  the other year-month to compare to, not null
     * @return true if this point is before the specified year-month
     */
    public boolean isBefore(YearMonth other) {
        return compareTo(other) < 0;
    }

    //-----------------------------------------------------------------------
    
Checks if this year-month is equal to another year-month.


The comparison is based on the time-line position of the year-months.

Params:
  • obj –  the object to check, null returns false
Returns:true if this is equal to the other year-month
/**
     * Checks if this year-month is equal to another year-month.
     * <p>
     * The comparison is based on the time-line position of the year-months.
     *
     * @param obj  the object to check, null returns false
     * @return true if this is equal to the other year-month
     */
    @Override
    public boolean equals(Object obj) {
        if (this == obj) {
            return true;
        }
        if (obj instanceof YearMonth) {
            YearMonth other = (YearMonth) obj;
            return year == other.year && month == other.month;
        }
        return false;
    }

    
A hash code for this year-month.

Returns:a suitable hash code
/**
     * A hash code for this year-month.
     *
     * @return a suitable hash code
     */
    @Override
    public int hashCode() {
        return year ^ (month << 27);
    }

    //-----------------------------------------------------------------------
    
Outputs this year-month as a String, such as 2007-12. 
 The output will be in the format uuuu-MM: 
Returns:a string representation of this year-month, not null
/**
     * Outputs this year-month as a {@code String}, such as {@code 2007-12}.
     * <p>
     * The output will be in the format {@code uuuu-MM}:
     *
     * @return a string representation of this year-month, not null
     */
    @Override
    public String toString() {
        int absYear = Math.abs(year);
        StringBuilder buf = new StringBuilder(9);
        if (absYear < 1000) {
            if (year < 0) {
                buf.append(year - 10000).deleteCharAt(1);
            } else {
                buf.append(year + 10000).deleteCharAt(0);
            }
        } else {
            buf.append(year);
        }
        return buf.append(month < 10 ? "-0" : "-")
            .append(month)
            .toString();
    }

    //-----------------------------------------------------------------------
    
Writes the object using a
dedicated serialized form.

@serialData

 out.writeByte(12);  // identifies a YearMonth
 out.writeInt(year);
 out.writeByte(month);

Returns:the instance of Ser, not null
/**
     * Writes the object using a
     * <a href="../../serialized-form.html#java.time.Ser">dedicated serialized form</a>.
     * @serialData
     * <pre>
     *  out.writeByte(12);  // identifies a YearMonth
     *  out.writeInt(year);
     *  out.writeByte(month);
     * </pre>
     *
     * @return the instance of {@code Ser}, not null
     */
    private Object writeReplace() {
        return new Ser(Ser.YEAR_MONTH_TYPE, this);
    }

    
Defend against malicious streams.

Params:
  • s – the stream to read
Throws:
/**
     * Defend against malicious streams.
     *
     * @param s the stream to read
     * @throws InvalidObjectException always
     */
    private void readObject(ObjectInputStream s) throws InvalidObjectException {
        throw new InvalidObjectException("Deserialization via serialization delegate");
    }

    void writeExternal(DataOutput out) throws IOException {
        out.writeInt(year);
        out.writeByte(month);
    }

    static YearMonth readExternal(DataInput in) throws IOException {
        int year = in.readInt();
        byte month = in.readByte();
        return YearMonth.of(year, month);
    }

}