/*
 * Copyright 2014 Red Hat, Inc.
 *
 * Red Hat licenses this file to you under the Apache License, version 2.0
 * (the "License"); you may not use this file except in compliance with the
 * License.  You may obtain a copy of the License at:
 *
 * http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
 * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.  See the
 * License for the specific language governing permissions and limitations
 * under the License.
 */

package io.vertx.reactivex.core.http;

import java.util.Map;
import io.reactivex.Observable;
import io.reactivex.Flowable;
import io.reactivex.Single;
import io.reactivex.Completable;
import io.reactivex.Maybe;
import javax.net.ssl.SSLSession;
import io.vertx.core.AsyncResult;
import io.vertx.core.Handler;

Base WebSocket implementation.
 It implements both and so it can be used with Pipe to pipe data with flow control. 
 NOTE: This class has been automatically generated from the original non RX-ified interface using Vert.x codegen. /**
 * Base WebSocket implementation.
 * <p>
 * It implements both  and  so it can be used with
 * {@link io.vertx.reactivex.core.streams.Pipe} to pipe data with flow control.
 *
 * <p/>
 * NOTE: This class has been automatically generated from the {@link io.vertx.core.http.WebSocketBase original} non RX-ified interface using Vert.x codegen.
 */

@io.vertx.lang.rx.RxGen(io.vertx.core.http.WebSocketBase.class)
public interface WebSocketBase extends io.vertx.reactivex.core.streams.ReadStream<io.vertx.reactivex.core.buffer.Buffer>, io.vertx.reactivex.core.streams.WriteStream<io.vertx.reactivex.core.buffer.Buffer> {

  io.vertx.core.http.WebSocketBase getDelegate();

  
Same as end but writes some data to the stream before ending. 
Params:
data – the data to write/**
   * Same as {@link io.vertx.reactivex.core.http.WebSocketBase#end} but writes some data to the stream before ending.
   * @param data the data to write
   */
  public void end(io.vertx.reactivex.core.buffer.Buffer data);

  
Same as  but with an handler called when the operation completes
Params:
data – 
handler – /**
   * Same as  but with an <code>handler</code> called when the operation completes
   * @param data 
   * @param handler 
   */
  public void end(io.vertx.reactivex.core.buffer.Buffer data, Handler<AsyncResult<Void>> handler);

  
This will return true if there are more bytes in the write queue than the value set using setWriteQueueMaxSize 
Returns:
true if write queue is full/**
   * This will return <code>true</code> if there are more bytes in the write queue than the value set using {@link io.vertx.reactivex.core.http.WebSocketBase#setWriteQueueMaxSize}
   * @return true if write queue is full
   */
  public boolean writeQueueFull();

  
Pause this stream and return a  to transfer the elements of this stream to a destination .

The stream will be resumed when the pipe will be wired to a WriteStream.
Returns:
a pipe/**
   * Pause this stream and return a  to transfer the elements of this stream to a destination .
   * <p/>
   * The stream will be resumed when the pipe will be wired to a <code>WriteStream</code>.
   * @return a pipe
   */
  public io.vertx.reactivex.core.streams.Pipe<io.vertx.reactivex.core.buffer.Buffer> pipe();

  
Like ReadStream.pipeTo but with no completion handler. 
Params:
dst – /**
   * Like {@link io.vertx.reactivex.core.streams.ReadStream#pipeTo} but with no completion handler.
   * @param dst 
   */
  public void pipeTo(io.vertx.reactivex.core.streams.WriteStream<io.vertx.reactivex.core.buffer.Buffer> dst);

  
Pipe this ReadStream to the WriteStream.

Elements emitted by this stream will be written to the write stream until this stream ends or fails.

Once this stream has ended or failed, the write stream will be ended and the handler will be
called with the result.
Params:
dst – the destination write stream
handler – /**
   * Pipe this <code>ReadStream</code> to the <code>WriteStream</code>.
   * <p>
   * Elements emitted by this stream will be written to the write stream until this stream ends or fails.
   * <p>
   * Once this stream has ended or failed, the write stream will be ended and the <code>handler</code> will be
   * called with the result.
   * @param dst the destination write stream
   * @param handler 
   */
  public void pipeTo(io.vertx.reactivex.core.streams.WriteStream<io.vertx.reactivex.core.buffer.Buffer> dst, Handler<AsyncResult<Void>> handler);

  public io.vertx.reactivex.core.http.WebSocketBase exceptionHandler(Handler<Throwable> handler);

  public io.vertx.reactivex.core.http.WebSocketBase handler(Handler<io.vertx.reactivex.core.buffer.Buffer> handler);

  public io.vertx.reactivex.core.http.WebSocketBase pause();

  public io.vertx.reactivex.core.http.WebSocketBase resume();

  public io.vertx.reactivex.core.http.WebSocketBase fetch(long amount);

  public io.vertx.reactivex.core.http.WebSocketBase endHandler(Handler<Void> endHandler);

  public io.vertx.reactivex.core.http.WebSocketBase write(io.vertx.reactivex.core.buffer.Buffer data);

  public io.vertx.reactivex.core.http.WebSocketBase write(io.vertx.reactivex.core.buffer.Buffer data, Handler<AsyncResult<Void>> handler);

  public io.vertx.reactivex.core.http.WebSocketBase setWriteQueueMaxSize(int maxSize);

  public io.vertx.reactivex.core.http.WebSocketBase drainHandler(Handler<Void> handler);

  
When a WebSocket is created it automatically registers an event handler with the event bus - the ID of that
handler is given by this method.

Given this ID, a different event loop can send a binary frame to that event handler using the event bus and
that buffer will be received by this instance in its own event loop and written to the underlying connection. This
allows you to write data to other WebSockets which are owned by different event loops.
Returns:
the binary handler id/**
   * When a <code>WebSocket</code> is created it automatically registers an event handler with the event bus - the ID of that
   * handler is given by this method.
   * <p>
   * Given this ID, a different event loop can send a binary frame to that event handler using the event bus and
   * that buffer will be received by this instance in its own event loop and written to the underlying connection. This
   * allows you to write data to other WebSockets which are owned by different event loops.
   * @return the binary handler id
   */
  public String binaryHandlerID();

  
When a WebSocket is created it automatically registers an event handler with the eventbus, the ID of that
handler is given by textHandlerID.

Given this ID, a different event loop can send a text frame to that event handler using the event bus and
that buffer will be received by this instance in its own event loop and written to the underlying connection. This
allows you to write data to other WebSockets which are owned by different event loops.
Returns:
/**
   * When a <code>WebSocket</code> is created it automatically registers an event handler with the eventbus, the ID of that
   * handler is given by <code>textHandlerID</code>.
   * <p>
   * Given this ID, a different event loop can send a text frame to that event handler using the event bus and
   * that buffer will be received by this instance in its own event loop and written to the underlying connection. This
   * allows you to write data to other WebSockets which are owned by different event loops.
   * @return 
   */
  public String textHandlerID();

  
Returns the WebSocket sub protocol selected by the WebSocket handshake.

On the server, the value will be null when the handler receives the websocket callback as the
handshake will not be completed yet.
Returns:
/**
   * Returns the WebSocket sub protocol selected by the WebSocket handshake.
   * <p/>
   * On the server, the value will be <code>null</code> when the handler receives the websocket callback as the
   * handshake will not be completed yet.
   * @return 
   */
  public String subProtocol();

  
Write a WebSocket frame to the connection
Params:
frame – the frame to write
Returns:
a reference to this, so the API can be used fluently/**
   * Write a WebSocket frame to the connection
   * @param frame the frame to write
   * @return a reference to this, so the API can be used fluently
   */
  public io.vertx.reactivex.core.http.WebSocketBase writeFrame(io.vertx.reactivex.core.http.WebSocketFrame frame);

  
Same as writeFrame but with an handler called when the operation completes
Params:
frame – 
handler – 
Returns:
/**
   * Same as {@link io.vertx.reactivex.core.http.WebSocketBase#writeFrame} but with an <code>handler</code> called when the operation completes
   * @param frame 
   * @param handler 
   * @return 
   */
  public io.vertx.reactivex.core.http.WebSocketBase writeFrame(io.vertx.reactivex.core.http.WebSocketFrame frame, Handler<AsyncResult<Void>> handler);

  
Write a final WebSocket text frame to the connection
Params:
text – The text to write
Returns:
a reference to this, so the API can be used fluently/**
   * Write a final WebSocket text frame to the connection
   * @param text The text to write
   * @return a reference to this, so the API can be used fluently
   */
  public io.vertx.reactivex.core.http.WebSocketBase writeFinalTextFrame(String text);

  
Same as writeFinalTextFrame but with an handler called when the operation completes
Params:
text – 
handler – 
Returns:
/**
   * Same as {@link io.vertx.reactivex.core.http.WebSocketBase#writeFinalTextFrame} but with an <code>handler</code> called when the operation completes
   * @param text 
   * @param handler 
   * @return 
   */
  public io.vertx.reactivex.core.http.WebSocketBase writeFinalTextFrame(String text, Handler<AsyncResult<Void>> handler);

  
Write a final WebSocket binary frame to the connection
Params:
data – The data to write
Returns:
a reference to this, so the API can be used fluently/**
   * Write a final WebSocket binary frame to the connection
   * @param data The data to write
   * @return a reference to this, so the API can be used fluently
   */
  public io.vertx.reactivex.core.http.WebSocketBase writeFinalBinaryFrame(io.vertx.reactivex.core.buffer.Buffer data);

  
Same as writeFinalBinaryFrame but with an handler called when the operation completes
Params:
data – 
handler – 
Returns:
/**
   * Same as {@link io.vertx.reactivex.core.http.WebSocketBase#writeFinalBinaryFrame} but with an <code>handler</code> called when the operation completes
   * @param data 
   * @param handler 
   * @return 
   */
  public io.vertx.reactivex.core.http.WebSocketBase writeFinalBinaryFrame(io.vertx.reactivex.core.buffer.Buffer data, Handler<AsyncResult<Void>> handler);

  
Writes a (potentially large) piece of binary data to the connection. This data might be written as multiple frames
if it exceeds the maximum WebSocket frame size.
Params:
data – the data to write
Returns:
a reference to this, so the API can be used fluently/**
   * Writes a (potentially large) piece of binary data to the connection. This data might be written as multiple frames
   * if it exceeds the maximum WebSocket frame size.
   * @param data the data to write
   * @return a reference to this, so the API can be used fluently
   */
  public io.vertx.reactivex.core.http.WebSocketBase writeBinaryMessage(io.vertx.reactivex.core.buffer.Buffer data);

  
Same as writeBinaryMessage but with an handler called when the operation completes
Params:
data – 
handler – 
Returns:
/**
   * Same as {@link io.vertx.reactivex.core.http.WebSocketBase#writeBinaryMessage} but with an <code>handler</code> called when the operation completes
   * @param data 
   * @param handler 
   * @return 
   */
  public io.vertx.reactivex.core.http.WebSocketBase writeBinaryMessage(io.vertx.reactivex.core.buffer.Buffer data, Handler<AsyncResult<Void>> handler);

  
Writes a (potentially large) piece of text data to the connection. This data might be written as multiple frames
if it exceeds the maximum WebSocket frame size.
Params:
text – the data to write
Returns:
a reference to this, so the API can be used fluently/**
   * Writes a (potentially large) piece of text data to the connection. This data might be written as multiple frames
   * if it exceeds the maximum WebSocket frame size.
   * @param text the data to write
   * @return a reference to this, so the API can be used fluently
   */
  public io.vertx.reactivex.core.http.WebSocketBase writeTextMessage(String text);

  
Same as writeTextMessage but with an handler called when the operation completes
Params:
text – 
handler – 
Returns:
/**
   * Same as {@link io.vertx.reactivex.core.http.WebSocketBase#writeTextMessage} but with an <code>handler</code> called when the operation completes
   * @param text 
   * @param handler 
   * @return 
   */
  public io.vertx.reactivex.core.http.WebSocketBase writeTextMessage(String text, Handler<AsyncResult<Void>> handler);

  
Writes a ping frame to the connection. This will be written in a single frame. Ping frames may be at most 125 bytes (octets).

This method should not be used to write application data and should only be used for implementing a keep alive or
to ensure the client is still responsive, see RFC 6455 Section section 5.5.2.

There is no handler for ping frames because RFC 6455  clearly
states that the only response to a ping frame is a pong frame with identical contents.
Params:
data – the data to write, may be at most 125 bytes
Returns:
a reference to this, so the API can be used fluently/**
   * Writes a ping frame to the connection. This will be written in a single frame. Ping frames may be at most 125 bytes (octets).
   * <p>
   * This method should not be used to write application data and should only be used for implementing a keep alive or
   * to ensure the client is still responsive, see RFC 6455 Section <a href="https://tools.ietf.org/html/rfc6455#section-5.5.2">section 5.5.2</a>.
   * <p>
   * There is no handler for ping frames because RFC 6455  clearly
   * states that the only response to a ping frame is a pong frame with identical contents.
   * @param data the data to write, may be at most 125 bytes
   * @return a reference to this, so the API can be used fluently
   */
  public io.vertx.reactivex.core.http.WebSocketBase writePing(io.vertx.reactivex.core.buffer.Buffer data);

  
Writes a pong frame to the connection. This will be written in a single frame. Pong frames may be at most 125 bytes (octets).

This method should not be used to write application data and should only be used for implementing a keep alive or
to ensure the client is still responsive, see RFC 6455 section 5.5.2.

There is no need to manually write a pong frame, as the server and client both handle responding to a ping from with a pong from
automatically and this is exposed to users. RFC 6455 section 5.5.3 states that pongs may be sent unsolicited in order
to implement a one way heartbeat.
Params:
data – the data to write, may be at most 125 bytes
Returns:
a reference to this, so the API can be used fluently/**
   * Writes a pong frame to the connection. This will be written in a single frame. Pong frames may be at most 125 bytes (octets).
   * <p>
   * This method should not be used to write application data and should only be used for implementing a keep alive or
   * to ensure the client is still responsive, see RFC 6455 <a href="https://tools.ietf.org/html/rfc6455#section-5.5.2">section 5.5.2</a>.
   * <p>
   * There is no need to manually write a pong frame, as the server and client both handle responding to a ping from with a pong from
   * automatically and this is exposed to users. RFC 6455 <a href="https://tools.ietf.org/html/rfc6455#section-5.5.3">section 5.5.3</a> states that pongs may be sent unsolicited in order
   * to implement a one way heartbeat.
   * @param data the data to write, may be at most 125 bytes
   * @return a reference to this, so the API can be used fluently
   */
  public io.vertx.reactivex.core.http.WebSocketBase writePong(io.vertx.reactivex.core.buffer.Buffer data);

  
Set a close handler. This will be called when the WebSocket is closed.

After this callback, no more messages are expected.
Params:
handler – the handler
Returns:
a reference to this, so the API can be used fluently/**
   * Set a close handler. This will be called when the WebSocket is closed.
   * <p/>
   * After this callback, no more messages are expected.
   * @param handler the handler
   * @return a reference to this, so the API can be used fluently
   */
  public io.vertx.reactivex.core.http.WebSocketBase closeHandler(Handler<Void> handler);

  
Set a frame handler on the connection. This handler will be called when frames are read on the connection.
Params:
handler – the handler
Returns:
a reference to this, so the API can be used fluently/**
   * Set a frame handler on the connection. This handler will be called when frames are read on the connection.
   * @param handler the handler
   * @return a reference to this, so the API can be used fluently
   */
  public io.vertx.reactivex.core.http.WebSocketBase frameHandler(Handler<io.vertx.reactivex.core.http.WebSocketFrame> handler);

  
Set a text message handler on the connection. This handler will be called similar to the
, but the buffer will be converted to a String first
Params:
handler – the handler
Returns:
a reference to this, so the API can be used fluently/**
   * Set a text message handler on the connection. This handler will be called similar to the
   * , but the buffer will be converted to a String first
   * @param handler the handler
   * @return a reference to this, so the API can be used fluently
   */
  public io.vertx.reactivex.core.http.WebSocketBase textMessageHandler(Handler<String> handler);

  
Set a binary message handler on the connection. This handler serves a similar purpose to handler except that if a message comes into the socket in multiple frames, the data from the frames will be aggregated into a single buffer before calling the handler (using WebSocketFrame.isFinal to find the boundaries). 
Params:
handler – the handler
Returns:
a reference to this, so the API can be used fluently/**
   * Set a binary message handler on the connection. This handler serves a similar purpose to {@link io.vertx.reactivex.core.http.WebSocketBase#handler}
   * except that if a message comes into the socket in multiple frames, the data from the frames will be aggregated
   * into a single buffer before calling the handler (using {@link io.vertx.reactivex.core.http.WebSocketFrame#isFinal} to find the boundaries).
   * @param handler the handler
   * @return a reference to this, so the API can be used fluently
   */
  public io.vertx.reactivex.core.http.WebSocketBase binaryMessageHandler(Handler<io.vertx.reactivex.core.buffer.Buffer> handler);

  
Set a pong frame handler on the connection.  This handler will be invoked every time a pong frame is received
on the server, and can be used by both clients and servers since the RFC 6455 section 5.5.2 and section 5.5.3 do not
specify whether the client or server sends a ping.

Pong frames may be at most 125 bytes (octets).

There is no ping handler since ping frames should immediately be responded to with a pong frame with identical content

Pong frames may be received unsolicited.
Params:
handler – the handler
Returns:
a reference to this, so the API can be used fluently/**
   * Set a pong frame handler on the connection.  This handler will be invoked every time a pong frame is received
   * on the server, and can be used by both clients and servers since the RFC 6455 <a href="https://tools.ietf.org/html/rfc6455#section-5.5.2">section 5.5.2</a> and <a href="https://tools.ietf.org/html/rfc6455#section-5.5.3">section 5.5.3</a> do not
   * specify whether the client or server sends a ping.
   * <p>
   * Pong frames may be at most 125 bytes (octets).
   * <p>
   * There is no ping handler since ping frames should immediately be responded to with a pong frame with identical content
   * <p>
   * Pong frames may be received unsolicited.
   * @param handler the handler
   * @return a reference to this, so the API can be used fluently
   */
  public io.vertx.reactivex.core.http.WebSocketBase pongHandler(Handler<io.vertx.reactivex.core.buffer.Buffer> handler);

  
Calls close /**
   * Calls {@link io.vertx.reactivex.core.http.WebSocketBase#close}
   */
  public void end();

  
Calls close 
Params:
handler – /**
   * Calls {@link io.vertx.reactivex.core.http.WebSocketBase#close}
   * @param handler 
   */
  public void end(Handler<AsyncResult<Void>> handler);

  
Close the WebSocket sending the default close frame.

No more messages can be sent.
/**
   * Close the WebSocket sending the default close frame.
   * <p/>
   * No more messages can be sent.
   */
  public void close();

  
Same as close but with an handler called when the operation completes
Params:
handler – /**
   * Same as {@link io.vertx.reactivex.core.http.WebSocketBase#close} but with an <code>handler</code> called when the operation completes
   * @param handler 
   */
  public void close(Handler<AsyncResult<Void>> handler);

  
Close the WebSocket sending a close frame with specified status code. You can give a look at various close payloads
here: RFC6455 section 7.4.1

No more messages can be sent.
Params:
statusCode – Status code/**
   * Close the WebSocket sending a close frame with specified status code. You can give a look at various close payloads
   * here: RFC6455 <a href="https://tools.ietf.org/html/rfc6455#section-7.4.1">section 7.4.1</a>
   * <p/>
   * No more messages can be sent.
   * @param statusCode Status code
   */
  public void close(short statusCode);

  
Same as close but with an handler called when the operation completes
Params:
statusCode – 
handler – /**
   * Same as {@link io.vertx.reactivex.core.http.WebSocketBase#close} but with an <code>handler</code> called when the operation completes
   * @param statusCode 
   * @param handler 
   */
  public void close(short statusCode, Handler<AsyncResult<Void>> handler);

  
Close sending a close frame with specified status code and reason. You can give a look at various close payloads
here: RFC6455 section 7.4.1

No more messages can be sent.
Params:
statusCode – Status code
reason – reason of closure/**
   * Close sending a close frame with specified status code and reason. You can give a look at various close payloads
   * here: RFC6455 <a href="https://tools.ietf.org/html/rfc6455#section-7.4.1">section 7.4.1</a>
   * <p/>
   * No more messages can be sent.
   * @param statusCode Status code
   * @param reason reason of closure
   */
  public void close(short statusCode, String reason);

  
Same as  but with an handler called when the operation completes
Params:
statusCode – 
reason – 
handler – /**
   * Same as  but with an <code>handler</code> called when the operation completes
   * @param statusCode 
   * @param reason 
   * @param handler 
   */
  public void close(short statusCode, String reason, Handler<AsyncResult<Void>> handler);

  
Returns:
the remote address for this socket/**
   * @return the remote address for this socket
   */
  public io.vertx.reactivex.core.net.SocketAddress remoteAddress();

  
Returns:
the local address for this socket/**
   * @return the local address for this socket
   */
  public io.vertx.reactivex.core.net.SocketAddress localAddress();

  
Returns:
true if this HttpConnection is encrypted via SSL/TLS./**
   * @return true if this {@link io.vertx.reactivex.core.http.HttpConnection} is encrypted via SSL/TLS.
   */
  public boolean isSsl();

  
Returns:
true if the WebSocket is closed/**
   * @return <code>true</code> if the WebSocket is closed
   */
  public boolean isClosed();


  public static  WebSocketBase newInstance(io.vertx.core.http.WebSocketBase arg) {
    return arg != null ? new WebSocketBaseImpl(arg) : null;
  }
}

class WebSocketBaseImpl implements WebSocketBase {
  private final io.vertx.core.http.WebSocketBase delegate;
  
  public WebSocketBaseImpl(io.vertx.core.http.WebSocketBase delegate) {
    this.delegate = delegate;
  }

  public io.vertx.core.http.WebSocketBase getDelegate() {
    return delegate;
  }

  private io.reactivex.Observable<io.vertx.reactivex.core.buffer.Buffer> observable;
  private io.reactivex.Flowable<io.vertx.reactivex.core.buffer.Buffer> flowable;

  public synchronized io.reactivex.Observable<io.vertx.reactivex.core.buffer.Buffer> toObservable() {
    if (observable == null) {
      java.util.function.Function<io.vertx.core.buffer.Buffer, io.vertx.reactivex.core.buffer.Buffer> conv = io.vertx.reactivex.core.buffer.Buffer::newInstance;
      observable = io.vertx.reactivex.ObservableHelper.toObservable(delegate, conv);
    }
    return observable;
  }

  public synchronized io.reactivex.Flowable<io.vertx.reactivex.core.buffer.Buffer> toFlowable() {
    if (flowable == null) {
      java.util.function.Function<io.vertx.core.buffer.Buffer, io.vertx.reactivex.core.buffer.Buffer> conv = io.vertx.reactivex.core.buffer.Buffer::newInstance;
      flowable = io.vertx.reactivex.FlowableHelper.toFlowable(delegate, conv);
    }
    return flowable;
  }

  private io.vertx.reactivex.WriteStreamObserver<io.vertx.reactivex.core.buffer.Buffer> observer;
  private io.vertx.reactivex.WriteStreamSubscriber<io.vertx.reactivex.core.buffer.Buffer> subscriber;

  public synchronized io.vertx.reactivex.WriteStreamObserver<io.vertx.reactivex.core.buffer.Buffer> toObserver() {
    if (observer == null) {
      java.util.function.Function<io.vertx.reactivex.core.buffer.Buffer, io.vertx.core.buffer.Buffer> conv = io.vertx.reactivex.core.buffer.Buffer::getDelegate;
      observer = io.vertx.reactivex.RxHelper.toObserver(getDelegate(), conv);
    }
    return observer;
  }

  public synchronized io.vertx.reactivex.WriteStreamSubscriber<io.vertx.reactivex.core.buffer.Buffer> toSubscriber() {
    if (subscriber == null) {
      java.util.function.Function<io.vertx.reactivex.core.buffer.Buffer, io.vertx.core.buffer.Buffer> conv = io.vertx.reactivex.core.buffer.Buffer::getDelegate;
      subscriber = io.vertx.reactivex.RxHelper.toSubscriber(getDelegate(), conv);
    }
    return subscriber;
  }

  
Same as WebSocketBase.end but writes some data to the stream before ending. 
Params:
data – the data to write/**
   * Same as {@link io.vertx.reactivex.core.http.WebSocketBase#end} but writes some data to the stream before ending.
   * @param data the data to write
   */
  public void end(io.vertx.reactivex.core.buffer.Buffer data) { 
    delegate.end(data.getDelegate());
  }

  
Same as  but with an handler called when the operation completes
Params:
data – 
handler – /**
   * Same as  but with an <code>handler</code> called when the operation completes
   * @param data 
   * @param handler 
   */
  public void end(io.vertx.reactivex.core.buffer.Buffer data, Handler<AsyncResult<Void>> handler) { 
    delegate.end(data.getDelegate(), handler);
  }

  
Same as  but with an handler called when the operation completes
Params:
data – 
Returns:
/**
   * Same as  but with an <code>handler</code> called when the operation completes
   * @param data 
   * @return 
   */
  public Completable rxEnd(io.vertx.reactivex.core.buffer.Buffer data) { 
    return io.vertx.reactivex.impl.AsyncResultCompletable.toCompletable(handler -> {
      end(data, handler);
    });
  }

  
This will return true if there are more bytes in the write queue than the value set using WebSocketBase.setWriteQueueMaxSize 
Returns:
true if write queue is full/**
   * This will return <code>true</code> if there are more bytes in the write queue than the value set using {@link io.vertx.reactivex.core.http.WebSocketBase#setWriteQueueMaxSize}
   * @return true if write queue is full
   */
  public boolean writeQueueFull() { 
    boolean ret = delegate.writeQueueFull();
    return ret;
  }

  
Pause this stream and return a  to transfer the elements of this stream to a destination .

The stream will be resumed when the pipe will be wired to a WriteStream.
Returns:
a pipe/**
   * Pause this stream and return a  to transfer the elements of this stream to a destination .
   * <p/>
   * The stream will be resumed when the pipe will be wired to a <code>WriteStream</code>.
   * @return a pipe
   */
  public io.vertx.reactivex.core.streams.Pipe<io.vertx.reactivex.core.buffer.Buffer> pipe() { 
    io.vertx.reactivex.core.streams.Pipe<io.vertx.reactivex.core.buffer.Buffer> ret = io.vertx.reactivex.core.streams.Pipe.newInstance(delegate.pipe(), (io.vertx.lang.rx.TypeArg)io.vertx.reactivex.core.buffer.Buffer.__TYPE_ARG);
    return ret;
  }

  
Like ReadStream.pipeTo but with no completion handler. 
Params:
dst – /**
   * Like {@link io.vertx.reactivex.core.streams.ReadStream#pipeTo} but with no completion handler.
   * @param dst 
   */
  public void pipeTo(io.vertx.reactivex.core.streams.WriteStream<io.vertx.reactivex.core.buffer.Buffer> dst) { 
    delegate.pipeTo(dst.getDelegate());
  }

  
Pipe this ReadStream to the WriteStream.

Elements emitted by this stream will be written to the write stream until this stream ends or fails.

Once this stream has ended or failed, the write stream will be ended and the handler will be
called with the result.
Params:
dst – the destination write stream
handler – /**
   * Pipe this <code>ReadStream</code> to the <code>WriteStream</code>.
   * <p>
   * Elements emitted by this stream will be written to the write stream until this stream ends or fails.
   * <p>
   * Once this stream has ended or failed, the write stream will be ended and the <code>handler</code> will be
   * called with the result.
   * @param dst the destination write stream
   * @param handler 
   */
  public void pipeTo(io.vertx.reactivex.core.streams.WriteStream<io.vertx.reactivex.core.buffer.Buffer> dst, Handler<AsyncResult<Void>> handler) { 
    delegate.pipeTo(dst.getDelegate(), handler);
  }

  
Pipe this ReadStream to the WriteStream.

Elements emitted by this stream will be written to the write stream until this stream ends or fails.

Once this stream has ended or failed, the write stream will be ended and the handler will be
called with the result.
Params:
dst – the destination write stream
Returns:
/**
   * Pipe this <code>ReadStream</code> to the <code>WriteStream</code>.
   * <p>
   * Elements emitted by this stream will be written to the write stream until this stream ends or fails.
   * <p>
   * Once this stream has ended or failed, the write stream will be ended and the <code>handler</code> will be
   * called with the result.
   * @param dst the destination write stream
   * @return 
   */
  public Completable rxPipeTo(io.vertx.reactivex.core.streams.WriteStream<io.vertx.reactivex.core.buffer.Buffer> dst) { 
    return io.vertx.reactivex.impl.AsyncResultCompletable.toCompletable(handler -> {
      pipeTo(dst, handler);
    });
  }

  public io.vertx.reactivex.core.http.WebSocketBase exceptionHandler(Handler<Throwable> handler) { 
    delegate.exceptionHandler(handler);
    return this;
  }

  public io.vertx.reactivex.core.http.WebSocketBase handler(Handler<io.vertx.reactivex.core.buffer.Buffer> handler) { 
    delegate.handler(new Handler<io.vertx.core.buffer.Buffer>() {
      public void handle(io.vertx.core.buffer.Buffer event) {
        handler.handle(io.vertx.reactivex.core.buffer.Buffer.newInstance(event));
      }
    });
    return this;
  }

  public io.vertx.reactivex.core.http.WebSocketBase pause() { 
    delegate.pause();
    return this;
  }

  public io.vertx.reactivex.core.http.WebSocketBase resume() { 
    delegate.resume();
    return this;
  }

  public io.vertx.reactivex.core.http.WebSocketBase fetch(long amount) { 
    delegate.fetch(amount);
    return this;
  }

  public io.vertx.reactivex.core.http.WebSocketBase endHandler(Handler<Void> endHandler) { 
    delegate.endHandler(endHandler);
    return this;
  }

  public io.vertx.reactivex.core.http.WebSocketBase write(io.vertx.reactivex.core.buffer.Buffer data) { 
    delegate.write(data.getDelegate());
    return this;
  }

  public io.vertx.reactivex.core.http.WebSocketBase write(io.vertx.reactivex.core.buffer.Buffer data, Handler<AsyncResult<Void>> handler) { 
    delegate.write(data.getDelegate(), handler);
    return this;
  }

  public Completable rxWrite(io.vertx.reactivex.core.buffer.Buffer data) { 
    return io.vertx.reactivex.impl.AsyncResultCompletable.toCompletable(handler -> {
      write(data, handler);
    });
  }

  public io.vertx.reactivex.core.http.WebSocketBase setWriteQueueMaxSize(int maxSize) { 
    delegate.setWriteQueueMaxSize(maxSize);
    return this;
  }

  public io.vertx.reactivex.core.http.WebSocketBase drainHandler(Handler<Void> handler) { 
    delegate.drainHandler(handler);
    return this;
  }

  
When a WebSocket is created it automatically registers an event handler with the event bus - the ID of that
handler is given by this method.

Given this ID, a different event loop can send a binary frame to that event handler using the event bus and
that buffer will be received by this instance in its own event loop and written to the underlying connection. This
allows you to write data to other WebSockets which are owned by different event loops.
Returns:
the binary handler id/**
   * When a <code>WebSocket</code> is created it automatically registers an event handler with the event bus - the ID of that
   * handler is given by this method.
   * <p>
   * Given this ID, a different event loop can send a binary frame to that event handler using the event bus and
   * that buffer will be received by this instance in its own event loop and written to the underlying connection. This
   * allows you to write data to other WebSockets which are owned by different event loops.
   * @return the binary handler id
   */
  public String binaryHandlerID() { 
    String ret = delegate.binaryHandlerID();
    return ret;
  }

  
When a WebSocket is created it automatically registers an event handler with the eventbus, the ID of that
handler is given by textHandlerID.

Given this ID, a different event loop can send a text frame to that event handler using the event bus and
that buffer will be received by this instance in its own event loop and written to the underlying connection. This
allows you to write data to other WebSockets which are owned by different event loops.
Returns:
/**
   * When a <code>WebSocket</code> is created it automatically registers an event handler with the eventbus, the ID of that
   * handler is given by <code>textHandlerID</code>.
   * <p>
   * Given this ID, a different event loop can send a text frame to that event handler using the event bus and
   * that buffer will be received by this instance in its own event loop and written to the underlying connection. This
   * allows you to write data to other WebSockets which are owned by different event loops.
   * @return 
   */
  public String textHandlerID() { 
    String ret = delegate.textHandlerID();
    return ret;
  }

  
Returns the WebSocket sub protocol selected by the WebSocket handshake.

On the server, the value will be null when the handler receives the websocket callback as the
handshake will not be completed yet.
Returns:
/**
   * Returns the WebSocket sub protocol selected by the WebSocket handshake.
   * <p/>
   * On the server, the value will be <code>null</code> when the handler receives the websocket callback as the
   * handshake will not be completed yet.
   * @return 
   */
  public String subProtocol() { 
    String ret = delegate.subProtocol();
    return ret;
  }

  
Write a WebSocket frame to the connection
Params:
frame – the frame to write
Returns:
a reference to this, so the API can be used fluently/**
   * Write a WebSocket frame to the connection
   * @param frame the frame to write
   * @return a reference to this, so the API can be used fluently
   */
  public io.vertx.reactivex.core.http.WebSocketBase writeFrame(io.vertx.reactivex.core.http.WebSocketFrame frame) { 
    delegate.writeFrame(frame.getDelegate());
    return this;
  }

  
Same as WebSocketBase.writeFrame but with an handler called when the operation completes
Params:
frame – 
handler – 
Returns:
/**
   * Same as {@link io.vertx.reactivex.core.http.WebSocketBase#writeFrame} but with an <code>handler</code> called when the operation completes
   * @param frame 
   * @param handler 
   * @return 
   */
  public io.vertx.reactivex.core.http.WebSocketBase writeFrame(io.vertx.reactivex.core.http.WebSocketFrame frame, Handler<AsyncResult<Void>> handler) { 
    delegate.writeFrame(frame.getDelegate(), handler);
    return this;
  }

  
Same as WebSocketBase.writeFrame but with an handler called when the operation completes
Params:
frame – 
Returns:
/**
   * Same as {@link io.vertx.reactivex.core.http.WebSocketBase#writeFrame} but with an <code>handler</code> called when the operation completes
   * @param frame 
   * @return 
   */
  public Completable rxWriteFrame(io.vertx.reactivex.core.http.WebSocketFrame frame) { 
    return io.vertx.reactivex.impl.AsyncResultCompletable.toCompletable(handler -> {
      writeFrame(frame, handler);
    });
  }

  
Write a final WebSocket text frame to the connection
Params:
text – The text to write
Returns:
a reference to this, so the API can be used fluently/**
   * Write a final WebSocket text frame to the connection
   * @param text The text to write
   * @return a reference to this, so the API can be used fluently
   */
  public io.vertx.reactivex.core.http.WebSocketBase writeFinalTextFrame(String text) { 
    delegate.writeFinalTextFrame(text);
    return this;
  }

  
Same as WebSocketBase.writeFinalTextFrame but with an handler called when the operation completes
Params:
text – 
handler – 
Returns:
/**
   * Same as {@link io.vertx.reactivex.core.http.WebSocketBase#writeFinalTextFrame} but with an <code>handler</code> called when the operation completes
   * @param text 
   * @param handler 
   * @return 
   */
  public io.vertx.reactivex.core.http.WebSocketBase writeFinalTextFrame(String text, Handler<AsyncResult<Void>> handler) { 
    delegate.writeFinalTextFrame(text, handler);
    return this;
  }

  
Same as WebSocketBase.writeFinalTextFrame but with an handler called when the operation completes
Params:
text – 
Returns:
/**
   * Same as {@link io.vertx.reactivex.core.http.WebSocketBase#writeFinalTextFrame} but with an <code>handler</code> called when the operation completes
   * @param text 
   * @return 
   */
  public Completable rxWriteFinalTextFrame(String text) { 
    return io.vertx.reactivex.impl.AsyncResultCompletable.toCompletable(handler -> {
      writeFinalTextFrame(text, handler);
    });
  }

  
Write a final WebSocket binary frame to the connection
Params:
data – The data to write
Returns:
a reference to this, so the API can be used fluently/**
   * Write a final WebSocket binary frame to the connection
   * @param data The data to write
   * @return a reference to this, so the API can be used fluently
   */
  public io.vertx.reactivex.core.http.WebSocketBase writeFinalBinaryFrame(io.vertx.reactivex.core.buffer.Buffer data) { 
    delegate.writeFinalBinaryFrame(data.getDelegate());
    return this;
  }

  
Same as WebSocketBase.writeFinalBinaryFrame but with an handler called when the operation completes
Params:
data – 
handler – 
Returns:
/**
   * Same as {@link io.vertx.reactivex.core.http.WebSocketBase#writeFinalBinaryFrame} but with an <code>handler</code> called when the operation completes
   * @param data 
   * @param handler 
   * @return 
   */
  public io.vertx.reactivex.core.http.WebSocketBase writeFinalBinaryFrame(io.vertx.reactivex.core.buffer.Buffer data, Handler<AsyncResult<Void>> handler) { 
    delegate.writeFinalBinaryFrame(data.getDelegate(), handler);
    return this;
  }

  
Same as WebSocketBase.writeFinalBinaryFrame but with an handler called when the operation completes
Params:
data – 
Returns:
/**
   * Same as {@link io.vertx.reactivex.core.http.WebSocketBase#writeFinalBinaryFrame} but with an <code>handler</code> called when the operation completes
   * @param data 
   * @return 
   */
  public Completable rxWriteFinalBinaryFrame(io.vertx.reactivex.core.buffer.Buffer data) { 
    return io.vertx.reactivex.impl.AsyncResultCompletable.toCompletable(handler -> {
      writeFinalBinaryFrame(data, handler);
    });
  }

  
Writes a (potentially large) piece of binary data to the connection. This data might be written as multiple frames
if it exceeds the maximum WebSocket frame size.
Params:
data – the data to write
Returns:
a reference to this, so the API can be used fluently/**
   * Writes a (potentially large) piece of binary data to the connection. This data might be written as multiple frames
   * if it exceeds the maximum WebSocket frame size.
   * @param data the data to write
   * @return a reference to this, so the API can be used fluently
   */
  public io.vertx.reactivex.core.http.WebSocketBase writeBinaryMessage(io.vertx.reactivex.core.buffer.Buffer data) { 
    delegate.writeBinaryMessage(data.getDelegate());
    return this;
  }

  
Same as WebSocketBase.writeBinaryMessage but with an handler called when the operation completes
Params:
data – 
handler – 
Returns:
/**
   * Same as {@link io.vertx.reactivex.core.http.WebSocketBase#writeBinaryMessage} but with an <code>handler</code> called when the operation completes
   * @param data 
   * @param handler 
   * @return 
   */
  public io.vertx.reactivex.core.http.WebSocketBase writeBinaryMessage(io.vertx.reactivex.core.buffer.Buffer data, Handler<AsyncResult<Void>> handler) { 
    delegate.writeBinaryMessage(data.getDelegate(), handler);
    return this;
  }

  
Same as WebSocketBase.writeBinaryMessage but with an handler called when the operation completes
Params:
data – 
Returns:
/**
   * Same as {@link io.vertx.reactivex.core.http.WebSocketBase#writeBinaryMessage} but with an <code>handler</code> called when the operation completes
   * @param data 
   * @return 
   */
  public Completable rxWriteBinaryMessage(io.vertx.reactivex.core.buffer.Buffer data) { 
    return io.vertx.reactivex.impl.AsyncResultCompletable.toCompletable(handler -> {
      writeBinaryMessage(data, handler);
    });
  }

  
Writes a (potentially large) piece of text data to the connection. This data might be written as multiple frames
if it exceeds the maximum WebSocket frame size.
Params:
text – the data to write
Returns:
a reference to this, so the API can be used fluently/**
   * Writes a (potentially large) piece of text data to the connection. This data might be written as multiple frames
   * if it exceeds the maximum WebSocket frame size.
   * @param text the data to write
   * @return a reference to this, so the API can be used fluently
   */
  public io.vertx.reactivex.core.http.WebSocketBase writeTextMessage(String text) { 
    delegate.writeTextMessage(text);
    return this;
  }

  
Same as WebSocketBase.writeTextMessage but with an handler called when the operation completes
Params:
text – 
handler – 
Returns:
/**
   * Same as {@link io.vertx.reactivex.core.http.WebSocketBase#writeTextMessage} but with an <code>handler</code> called when the operation completes
   * @param text 
   * @param handler 
   * @return 
   */
  public io.vertx.reactivex.core.http.WebSocketBase writeTextMessage(String text, Handler<AsyncResult<Void>> handler) { 
    delegate.writeTextMessage(text, handler);
    return this;
  }

  
Same as WebSocketBase.writeTextMessage but with an handler called when the operation completes
Params:
text – 
Returns:
/**
   * Same as {@link io.vertx.reactivex.core.http.WebSocketBase#writeTextMessage} but with an <code>handler</code> called when the operation completes
   * @param text 
   * @return 
   */
  public Completable rxWriteTextMessage(String text) { 
    return io.vertx.reactivex.impl.AsyncResultCompletable.toCompletable(handler -> {
      writeTextMessage(text, handler);
    });
  }

  
Writes a ping frame to the connection. This will be written in a single frame. Ping frames may be at most 125 bytes (octets).

This method should not be used to write application data and should only be used for implementing a keep alive or
to ensure the client is still responsive, see RFC 6455 Section section 5.5.2.

There is no handler for ping frames because RFC 6455  clearly
states that the only response to a ping frame is a pong frame with identical contents.
Params:
data – the data to write, may be at most 125 bytes
Returns:
a reference to this, so the API can be used fluently/**
   * Writes a ping frame to the connection. This will be written in a single frame. Ping frames may be at most 125 bytes (octets).
   * <p>
   * This method should not be used to write application data and should only be used for implementing a keep alive or
   * to ensure the client is still responsive, see RFC 6455 Section <a href="https://tools.ietf.org/html/rfc6455#section-5.5.2">section 5.5.2</a>.
   * <p>
   * There is no handler for ping frames because RFC 6455  clearly
   * states that the only response to a ping frame is a pong frame with identical contents.
   * @param data the data to write, may be at most 125 bytes
   * @return a reference to this, so the API can be used fluently
   */
  public io.vertx.reactivex.core.http.WebSocketBase writePing(io.vertx.reactivex.core.buffer.Buffer data) { 
    delegate.writePing(data.getDelegate());
    return this;
  }

  
Writes a pong frame to the connection. This will be written in a single frame. Pong frames may be at most 125 bytes (octets).

This method should not be used to write application data and should only be used for implementing a keep alive or
to ensure the client is still responsive, see RFC 6455 section 5.5.2.

There is no need to manually write a pong frame, as the server and client both handle responding to a ping from with a pong from
automatically and this is exposed to users. RFC 6455 section 5.5.3 states that pongs may be sent unsolicited in order
to implement a one way heartbeat.
Params:
data – the data to write, may be at most 125 bytes
Returns:
a reference to this, so the API can be used fluently/**
   * Writes a pong frame to the connection. This will be written in a single frame. Pong frames may be at most 125 bytes (octets).
   * <p>
   * This method should not be used to write application data and should only be used for implementing a keep alive or
   * to ensure the client is still responsive, see RFC 6455 <a href="https://tools.ietf.org/html/rfc6455#section-5.5.2">section 5.5.2</a>.
   * <p>
   * There is no need to manually write a pong frame, as the server and client both handle responding to a ping from with a pong from
   * automatically and this is exposed to users. RFC 6455 <a href="https://tools.ietf.org/html/rfc6455#section-5.5.3">section 5.5.3</a> states that pongs may be sent unsolicited in order
   * to implement a one way heartbeat.
   * @param data the data to write, may be at most 125 bytes
   * @return a reference to this, so the API can be used fluently
   */
  public io.vertx.reactivex.core.http.WebSocketBase writePong(io.vertx.reactivex.core.buffer.Buffer data) { 
    delegate.writePong(data.getDelegate());
    return this;
  }

  
Set a close handler. This will be called when the WebSocket is closed.

After this callback, no more messages are expected.
Params:
handler – the handler
Returns:
a reference to this, so the API can be used fluently/**
   * Set a close handler. This will be called when the WebSocket is closed.
   * <p/>
   * After this callback, no more messages are expected.
   * @param handler the handler
   * @return a reference to this, so the API can be used fluently
   */
  public io.vertx.reactivex.core.http.WebSocketBase closeHandler(Handler<Void> handler) { 
    delegate.closeHandler(handler);
    return this;
  }

  
Set a frame handler on the connection. This handler will be called when frames are read on the connection.
Params:
handler – the handler
Returns:
a reference to this, so the API can be used fluently/**
   * Set a frame handler on the connection. This handler will be called when frames are read on the connection.
   * @param handler the handler
   * @return a reference to this, so the API can be used fluently
   */
  public io.vertx.reactivex.core.http.WebSocketBase frameHandler(Handler<io.vertx.reactivex.core.http.WebSocketFrame> handler) { 
    delegate.frameHandler(new Handler<io.vertx.core.http.WebSocketFrame>() {
      public void handle(io.vertx.core.http.WebSocketFrame event) {
        handler.handle(io.vertx.reactivex.core.http.WebSocketFrame.newInstance(event));
      }
    });
    return this;
  }

  
Set a text message handler on the connection. This handler will be called similar to the
, but the buffer will be converted to a String first
Params:
handler – the handler
Returns:
a reference to this, so the API can be used fluently/**
   * Set a text message handler on the connection. This handler will be called similar to the
   * , but the buffer will be converted to a String first
   * @param handler the handler
   * @return a reference to this, so the API can be used fluently
   */
  public io.vertx.reactivex.core.http.WebSocketBase textMessageHandler(Handler<String> handler) { 
    delegate.textMessageHandler(handler);
    return this;
  }

  
Set a binary message handler on the connection. This handler serves a similar purpose to WebSocketBase.handler except that if a message comes into the socket in multiple frames, the data from the frames will be aggregated into a single buffer before calling the handler (using WebSocketFrame.isFinal to find the boundaries). 
Params:
handler – the handler
Returns:
a reference to this, so the API can be used fluently/**
   * Set a binary message handler on the connection. This handler serves a similar purpose to {@link io.vertx.reactivex.core.http.WebSocketBase#handler}
   * except that if a message comes into the socket in multiple frames, the data from the frames will be aggregated
   * into a single buffer before calling the handler (using {@link io.vertx.reactivex.core.http.WebSocketFrame#isFinal} to find the boundaries).
   * @param handler the handler
   * @return a reference to this, so the API can be used fluently
   */
  public io.vertx.reactivex.core.http.WebSocketBase binaryMessageHandler(Handler<io.vertx.reactivex.core.buffer.Buffer> handler) { 
    delegate.binaryMessageHandler(new Handler<io.vertx.core.buffer.Buffer>() {
      public void handle(io.vertx.core.buffer.Buffer event) {
        handler.handle(io.vertx.reactivex.core.buffer.Buffer.newInstance(event));
      }
    });
    return this;
  }

  
Set a pong frame handler on the connection.  This handler will be invoked every time a pong frame is received
on the server, and can be used by both clients and servers since the RFC 6455 section 5.5.2 and section 5.5.3 do not
specify whether the client or server sends a ping.

Pong frames may be at most 125 bytes (octets).

There is no ping handler since ping frames should immediately be responded to with a pong frame with identical content

Pong frames may be received unsolicited.
Params:
handler – the handler
Returns:
a reference to this, so the API can be used fluently/**
   * Set a pong frame handler on the connection.  This handler will be invoked every time a pong frame is received
   * on the server, and can be used by both clients and servers since the RFC 6455 <a href="https://tools.ietf.org/html/rfc6455#section-5.5.2">section 5.5.2</a> and <a href="https://tools.ietf.org/html/rfc6455#section-5.5.3">section 5.5.3</a> do not
   * specify whether the client or server sends a ping.
   * <p>
   * Pong frames may be at most 125 bytes (octets).
   * <p>
   * There is no ping handler since ping frames should immediately be responded to with a pong frame with identical content
   * <p>
   * Pong frames may be received unsolicited.
   * @param handler the handler
   * @return a reference to this, so the API can be used fluently
   */
  public io.vertx.reactivex.core.http.WebSocketBase pongHandler(Handler<io.vertx.reactivex.core.buffer.Buffer> handler) { 
    delegate.pongHandler(new Handler<io.vertx.core.buffer.Buffer>() {
      public void handle(io.vertx.core.buffer.Buffer event) {
        handler.handle(io.vertx.reactivex.core.buffer.Buffer.newInstance(event));
      }
    });
    return this;
  }

  
Calls WebSocketBase.close /**
   * Calls {@link io.vertx.reactivex.core.http.WebSocketBase#close}
   */
  public void end() { 
    delegate.end();
  }

  
Calls WebSocketBase.close 
Params:
handler – /**
   * Calls {@link io.vertx.reactivex.core.http.WebSocketBase#close}
   * @param handler 
   */
  public void end(Handler<AsyncResult<Void>> handler) { 
    delegate.end(handler);
  }

  
Calls WebSocketBase.close 
Returns:
/**
   * Calls {@link io.vertx.reactivex.core.http.WebSocketBase#close}
   * @return 
   */
  public Completable rxEnd() { 
    return io.vertx.reactivex.impl.AsyncResultCompletable.toCompletable(handler -> {
      end(handler);
    });
  }

  
Close the WebSocket sending the default close frame.

No more messages can be sent.
/**
   * Close the WebSocket sending the default close frame.
   * <p/>
   * No more messages can be sent.
   */
  public void close() { 
    delegate.close();
  }

  
Same as WebSocketBase.close but with an handler called when the operation completes
Params:
handler – /**
   * Same as {@link io.vertx.reactivex.core.http.WebSocketBase#close} but with an <code>handler</code> called when the operation completes
   * @param handler 
   */
  public void close(Handler<AsyncResult<Void>> handler) { 
    delegate.close(handler);
  }

  
Same as WebSocketBase.close but with an handler called when the operation completes
Returns:
/**
   * Same as {@link io.vertx.reactivex.core.http.WebSocketBase#close} but with an <code>handler</code> called when the operation completes
   * @return 
   */
  public Completable rxClose() { 
    return io.vertx.reactivex.impl.AsyncResultCompletable.toCompletable(handler -> {
      close(handler);
    });
  }

  
Close the WebSocket sending a close frame with specified status code. You can give a look at various close payloads
here: RFC6455 section 7.4.1

No more messages can be sent.
Params:
statusCode – Status code/**
   * Close the WebSocket sending a close frame with specified status code. You can give a look at various close payloads
   * here: RFC6455 <a href="https://tools.ietf.org/html/rfc6455#section-7.4.1">section 7.4.1</a>
   * <p/>
   * No more messages can be sent.
   * @param statusCode Status code
   */
  public void close(short statusCode) { 
    delegate.close(statusCode);
  }

  
Same as WebSocketBase.close but with an handler called when the operation completes
Params:
statusCode – 
handler – /**
   * Same as {@link io.vertx.reactivex.core.http.WebSocketBase#close} but with an <code>handler</code> called when the operation completes
   * @param statusCode 
   * @param handler 
   */
  public void close(short statusCode, Handler<AsyncResult<Void>> handler) { 
    delegate.close(statusCode, handler);
  }

  
Same as WebSocketBase.close but with an handler called when the operation completes
Params:
statusCode – 
Returns:
/**
   * Same as {@link io.vertx.reactivex.core.http.WebSocketBase#close} but with an <code>handler</code> called when the operation completes
   * @param statusCode 
   * @return 
   */
  public Completable rxClose(short statusCode) { 
    return io.vertx.reactivex.impl.AsyncResultCompletable.toCompletable(handler -> {
      close(statusCode, handler);
    });
  }

  
Close sending a close frame with specified status code and reason. You can give a look at various close payloads
here: RFC6455 section 7.4.1

No more messages can be sent.
Params:
statusCode – Status code
reason – reason of closure/**
   * Close sending a close frame with specified status code and reason. You can give a look at various close payloads
   * here: RFC6455 <a href="https://tools.ietf.org/html/rfc6455#section-7.4.1">section 7.4.1</a>
   * <p/>
   * No more messages can be sent.
   * @param statusCode Status code
   * @param reason reason of closure
   */
  public void close(short statusCode, String reason) { 
    delegate.close(statusCode, reason);
  }

  
Same as  but with an handler called when the operation completes
Params:
statusCode – 
reason – 
handler – /**
   * Same as  but with an <code>handler</code> called when the operation completes
   * @param statusCode 
   * @param reason 
   * @param handler 
   */
  public void close(short statusCode, String reason, Handler<AsyncResult<Void>> handler) { 
    delegate.close(statusCode, reason, handler);
  }

  
Same as  but with an handler called when the operation completes
Params:
statusCode – 
reason – 
Returns:
/**
   * Same as  but with an <code>handler</code> called when the operation completes
   * @param statusCode 
   * @param reason 
   * @return 
   */
  public Completable rxClose(short statusCode, String reason) { 
    return io.vertx.reactivex.impl.AsyncResultCompletable.toCompletable(handler -> {
      close(statusCode, reason, handler);
    });
  }

  
Returns:
the remote address for this socket/**
   * @return the remote address for this socket
   */
  public io.vertx.reactivex.core.net.SocketAddress remoteAddress() { 
    if (cached_0 != null) {
      return cached_0;
    }
    io.vertx.reactivex.core.net.SocketAddress ret = io.vertx.reactivex.core.net.SocketAddress.newInstance(delegate.remoteAddress());
    cached_0 = ret;
    return ret;
  }

  
Returns:
the local address for this socket/**
   * @return the local address for this socket
   */
  public io.vertx.reactivex.core.net.SocketAddress localAddress() { 
    if (cached_1 != null) {
      return cached_1;
    }
    io.vertx.reactivex.core.net.SocketAddress ret = io.vertx.reactivex.core.net.SocketAddress.newInstance(delegate.localAddress());
    cached_1 = ret;
    return ret;
  }

  
Returns:
true if this HttpConnection is encrypted via SSL/TLS./**
   * @return true if this {@link io.vertx.reactivex.core.http.HttpConnection} is encrypted via SSL/TLS.
   */
  public boolean isSsl() { 
    boolean ret = delegate.isSsl();
    return ret;
  }

  
Returns:
true if the WebSocket is closed/**
   * @return <code>true</code> if the WebSocket is closed
   */
  public boolean isClosed() { 
    boolean ret = delegate.isClosed();
    return ret;
  }

  
Returns:
SSLSession associated with the underlying socket. Returns null if connection is not SSL./**
   * @return SSLSession associated with the underlying socket. Returns null if connection is not SSL.
   */
  public SSLSession sslSession() { 
    SSLSession ret = delegate.sslSession();
    return ret;
  }

  private io.vertx.reactivex.core.net.SocketAddress cached_0;
  private io.vertx.reactivex.core.net.SocketAddress cached_1;
}