xalan/serializer/2.7.2 : org/apache/xpath/NodeSet.java

NodeSet
http://xml.apache.org/xalan-j/: Serializer to write out XML, HTML etc. as a stream of characters from an input DOM or from input SAX events. (The Apache Software Foundation)
The Apache Software License, Version 2.0
/*
 * Licensed to the Apache Software Foundation (ASF) under one
 * or more contributor license agreements. See the NOTICE file
 * distributed with this work for additional information
 * regarding copyright ownership. The ASF licenses this file
 * to you under the Apache License, Version 2.0 (the  "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 *     http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */
/*
 * $Id: NodeSet.java 468655 2006-10-28 07:12:06Z minchau $
 */
package org.apache.xpath;

import org.apache.xalan.res.XSLMessages;
import org.apache.xml.utils.DOM2Helper;
import org.apache.xpath.axes.ContextNodeList;
import org.apache.xpath.res.XPATHErrorResources;

import org.w3c.dom.DOMException;
import org.w3c.dom.Node;
import org.w3c.dom.NodeList;
import org.w3c.dom.traversal.NodeFilter;
import org.w3c.dom.traversal.NodeIterator;


The NodeSet class can act as either a NodeVector,
NodeList, or NodeIterator.  However, in order for it to
act as a NodeVector or NodeList, it's required that
setShouldCacheNodes(true) be called before the first
nextNode() is called, in order that nodes can be added
as they are fetched.  Derived classes that implement iterators
must override runTo(int index), in order that they may
run the iteration to the given index. 
Note that we directly implement the DOM's NodeIterator
interface. We do not emulate all the behavior of the
standard NodeIterator. In particular, we do not guarantee
to present a "live view" of the document ... but in XSLT,
the source document should never be mutated, so this should
never be an issue.
Thought: Should NodeSet really implement NodeList and NodeIterator,
or should there be specific subclasses of it which do so? The
advantage of doing it all here is that all NodeSets will respond
to the same calls; the disadvantage is that some of them may return
less-than-enlightening results when you do so.
@xsl.usage advanced/**
 * <p>The NodeSet class can act as either a NodeVector,
 * NodeList, or NodeIterator.  However, in order for it to
 * act as a NodeVector or NodeList, it's required that
 * setShouldCacheNodes(true) be called before the first
 * nextNode() is called, in order that nodes can be added
 * as they are fetched.  Derived classes that implement iterators
 * must override runTo(int index), in order that they may
 * run the iteration to the given index. </p>
 * 
 * <p>Note that we directly implement the DOM's NodeIterator
 * interface. We do not emulate all the behavior of the
 * standard NodeIterator. In particular, we do not guarantee
 * to present a "live view" of the document ... but in XSLT,
 * the source document should never be mutated, so this should
 * never be an issue.</p>
 * 
 * <p>Thought: Should NodeSet really implement NodeList and NodeIterator,
 * or should there be specific subclasses of it which do so? The
 * advantage of doing it all here is that all NodeSets will respond
 * to the same calls; the disadvantage is that some of them may return
 * less-than-enlightening results when you do so.</p>
 * @xsl.usage advanced
 */
public class NodeSet
        implements NodeList, NodeIterator, Cloneable, ContextNodeList
{

  Create an empty nodelist.
/**
   * Create an empty nodelist.
   */
  public NodeSet()
  {
    m_blocksize = 32;
    m_mapSize = 0;
  }

  Create an empty, using the given block size.
Params: blocksize – Size of blocks to allocate/**
   * Create an empty, using the given block size.
   *
   * @param blocksize Size of blocks to allocate 
   */
  public NodeSet(int blocksize)
  {
    m_blocksize = blocksize;
    m_mapSize = 0;
  }

  Create a NodeSet, and copy the members of the
given nodelist into it.
Params: nodelist – List of Nodes to be made members of the new set./**
   * Create a NodeSet, and copy the members of the
   * given nodelist into it.
   *
   * @param nodelist List of Nodes to be made members of the new set.
   */
  public NodeSet(NodeList nodelist)
  {

    this(32);

    addNodes(nodelist);
  }

  Create a NodeSet, and copy the members of the
given NodeSet into it.
Params: nodelist – Set of Nodes to be made members of the new set./**
   * Create a NodeSet, and copy the members of the
   * given NodeSet into it.
   *
   * @param nodelist Set of Nodes to be made members of the new set.
   */
  public NodeSet(NodeSet nodelist)
  {

    this(32);

    addNodes((NodeIterator) nodelist);
  }

  Create a NodeSet, and copy the members of the
given NodeIterator into it.
Params: ni – Iterator which yields Nodes to be made members of the new set./**
   * Create a NodeSet, and copy the members of the
   * given NodeIterator into it.
   *
   * @param ni Iterator which yields Nodes to be made members of the new set.
   */
  public NodeSet(NodeIterator ni)
  {

    this(32);

    addNodes(ni);
  }

  Create a NodeSet which contains the given Node.
Params: node – Single node to be added to the new set./**
   * Create a NodeSet which contains the given Node.
   *
   * @param node Single node to be added to the new set.
   */
  public NodeSet(Node node)
  {

    this(32);

    addNode(node);
  }

  Returns: The root node of the Iterator, as specified when it was created.
For non-Iterator NodeSets, this will be null./**
   * @return The root node of the Iterator, as specified when it was created.
   * For non-Iterator NodeSets, this will be null.
   */
  public Node getRoot()
  {
    return null;
  }

  Get a cloned Iterator, and reset its state to the beginning of the
iteration.
Throws: CloneNotSupportedException – if this subclass of NodeSet
does not support the clone() operation.
Returns: a new NodeSet of the same type, having the same state...
except that the reset() operation has been called./**
   * Get a cloned Iterator, and reset its state to the beginning of the
   * iteration.
   *
   * @return a new NodeSet of the same type, having the same state...
   * except that the reset() operation has been called.
   *
   * @throws CloneNotSupportedException if this subclass of NodeSet
   * does not support the clone() operation.
   */
  public NodeIterator cloneWithReset() throws CloneNotSupportedException
  {

    NodeSet clone = (NodeSet) clone();

    clone.reset();

    return clone;
  }

  Reset the iterator. May have no effect on non-iterator Nodesets.
/**
   * Reset the iterator. May have no effect on non-iterator Nodesets.
   */
  public void reset()
  {
    m_next = 0;
  }

   This attribute determines which node types are presented via the
iterator. The available set of constants is defined in the
NodeFilter interface. For NodeSets, the mask has been
hardcoded to show all nodes except EntityReference nodes, which have
no equivalent in the XPath data model.
Returns: integer used as a bit-array, containing flags defined in
the DOM's NodeFilter class. The value will be 
SHOW_ALL & ~SHOW_ENTITY_REFERENCE, meaning that
only entity references are suppressed./**
   *  This attribute determines which node types are presented via the
   * iterator. The available set of constants is defined in the
   * <code>NodeFilter</code> interface. For NodeSets, the mask has been
   * hardcoded to show all nodes except EntityReference nodes, which have
   * no equivalent in the XPath data model.
   *
   * @return integer used as a bit-array, containing flags defined in
   * the DOM's NodeFilter class. The value will be 
   * <code>SHOW_ALL & ~SHOW_ENTITY_REFERENCE</code>, meaning that
   * only entity references are suppressed.
   */
  public int getWhatToShow()
  {
    return NodeFilter.SHOW_ALL & ~NodeFilter.SHOW_ENTITY_REFERENCE;
  }

  The filter object used to screen nodes. Filters are applied to
further reduce (and restructure) the NodeIterator's view of the
document. In our case, we will be using hardcoded filters built
into our iterators... but getFilter() is part of the DOM's 
NodeIterator interface, so we have to support it.
Returns: null, which is slightly misleading. True, there is no
user-written filter object, but in fact we are doing some very
sophisticated custom filtering. A DOM purist might suggest
returning a placeholder object just to indicate that this is
not going to return all nodes selected by whatToShow./**
   * The filter object used to screen nodes. Filters are applied to
   * further reduce (and restructure) the NodeIterator's view of the
   * document. In our case, we will be using hardcoded filters built
   * into our iterators... but getFilter() is part of the DOM's 
   * NodeIterator interface, so we have to support it.
   *
   * @return null, which is slightly misleading. True, there is no
   * user-written filter object, but in fact we are doing some very
   * sophisticated custom filtering. A DOM purist might suggest
   * returning a placeholder object just to indicate that this is
   * not going to return all nodes selected by whatToShow.
   */
  public NodeFilter getFilter()
  {
    return null;
  }

   The value of this flag determines whether the children of entity
reference nodes are visible to the iterator. If false, they will be
skipped over.

 To produce a view of the document that has entity references
expanded and does not expose the entity reference node itself, use the
whatToShow flags to hide the entity reference node and set
expandEntityReferences to true when creating the iterator. To produce
a view of the document that has entity reference nodes but no entity
expansion, use the whatToShow flags to show the entity reference node
and set expandEntityReferences to false.
Returns: true for all iterators based on NodeSet, meaning that the
contents of EntityRefrence nodes may be returned (though whatToShow
says that the EntityReferences themselves are not shown.)/**
   *  The value of this flag determines whether the children of entity
   * reference nodes are visible to the iterator. If false, they will be
   * skipped over.
   * <br> To produce a view of the document that has entity references
   * expanded and does not expose the entity reference node itself, use the
   * whatToShow flags to hide the entity reference node and set
   * expandEntityReferences to true when creating the iterator. To produce
   * a view of the document that has entity reference nodes but no entity
   * expansion, use the whatToShow flags to show the entity reference node
   * and set expandEntityReferences to false.
   *
   * @return true for all iterators based on NodeSet, meaning that the
   * contents of EntityRefrence nodes may be returned (though whatToShow
   * says that the EntityReferences themselves are not shown.)
   */
  public boolean getExpandEntityReferences()
  {
    return true;
  }

   Returns the next node in the set and advances the position of the
iterator in the set. After a NodeIterator is created, the first call
to nextNode() returns the first node in the set.
Throws: DOMException – 
   INVALID_STATE_ERR: Raised if this method is called after the
  detach method was invoked.
Returns:  The next Node in the set being iterated over, or
  null if there are no more members in that set./**
   *  Returns the next node in the set and advances the position of the
   * iterator in the set. After a NodeIterator is created, the first call
   * to nextNode() returns the first node in the set.
   * @return  The next <code>Node</code> in the set being iterated over, or
   *   <code>null</code> if there are no more members in that set.
   * @throws DOMException
   *    INVALID_STATE_ERR: Raised if this method is called after the
   *   <code>detach</code> method was invoked.
   */
  public Node nextNode() throws DOMException
  {

    if ((m_next) < this.size())
    {
      Node next = this.elementAt(m_next);

      m_next++;

      return next;
    }
    else
      return null;
  }

   Returns the previous node in the set and moves the position of the
iterator backwards in the set.
Throws: DOMException – 
   INVALID_STATE_ERR: Raised if this method is called after the
  detach method was invoked.
RuntimeException – thrown if this NodeSet is not of 
a cached type, and hence doesn't know what the previous node was.
Returns:  The previous Node in the set being iterated over,
  ornull if there are no more members in that set./**
   *  Returns the previous node in the set and moves the position of the
   * iterator backwards in the set.
   * @return  The previous <code>Node</code> in the set being iterated over,
   *   or<code>null</code> if there are no more members in that set.
   * @throws DOMException
   *    INVALID_STATE_ERR: Raised if this method is called after the
   *   <code>detach</code> method was invoked.
   * @throws RuntimeException thrown if this NodeSet is not of 
   * a cached type, and hence doesn't know what the previous node was.
   */
  public Node previousNode() throws DOMException
  {

    if (!m_cacheNodes)
      throw new RuntimeException(
        XSLMessages.createXPATHMessage(XPATHErrorResources.ER_NODESET_CANNOT_ITERATE, null)); //"This NodeSet can not iterate to a previous node!");

    if ((m_next - 1) > 0)
    {
      m_next--;

      return this.elementAt(m_next);
    }
    else
      return null;
  }

  Detaches the iterator from the set which it iterated over, releasing
any computational resources and placing the iterator in the INVALID
state. Afterdetach has been invoked, calls to
nextNode orpreviousNode will raise the
exception INVALID_STATE_ERR.

This operation is a no-op in NodeSet, and will not cause 
INVALID_STATE_ERR to be raised by later operations.

/**
   * Detaches the iterator from the set which it iterated over, releasing
   * any computational resources and placing the iterator in the INVALID
   * state. After<code>detach</code> has been invoked, calls to
   * <code>nextNode</code> or<code>previousNode</code> will raise the
   * exception INVALID_STATE_ERR.
   * <p>
   * This operation is a no-op in NodeSet, and will not cause 
   * INVALID_STATE_ERR to be raised by later operations.
   * </p>
   */
  public void detach(){}

  Tells if this NodeSet is "fresh", in other words, if
the first nextNode() that is called will return the
first node in the set.
Returns: true if nextNode() would return the first node in the set,
false if it would return a later one./**
   * Tells if this NodeSet is "fresh", in other words, if
   * the first nextNode() that is called will return the
   * first node in the set.
   *
   * @return true if nextNode() would return the first node in the set,
   * false if it would return a later one.
   */
  public boolean isFresh()
  {
    return (m_next == 0);
  }

  If an index is requested, NodeSet will call this method
to run the iterator to the index.  By default this sets
m_next to the index.  If the index argument is -1, this
signals that the iterator should be run to the end.
Params: index – Position to advance (or retreat) to, with
0 requesting the reset ("fresh") position and -1 (or indeed
any out-of-bounds value) requesting the final position.
Throws: RuntimeException – thrown if this NodeSet is not
one of the types which supports indexing/counting./**
   * If an index is requested, NodeSet will call this method
   * to run the iterator to the index.  By default this sets
   * m_next to the index.  If the index argument is -1, this
   * signals that the iterator should be run to the end.
   *
   * @param index Position to advance (or retreat) to, with
   * 0 requesting the reset ("fresh") position and -1 (or indeed
   * any out-of-bounds value) requesting the final position.
   * @throws RuntimeException thrown if this NodeSet is not
   * one of the types which supports indexing/counting.
   */
  public void runTo(int index)
  {

    if (!m_cacheNodes)
      throw new RuntimeException(
        XSLMessages.createXPATHMessage(XPATHErrorResources.ER_NODESET_CANNOT_INDEX, null)); //"This NodeSet can not do indexing or counting functions!");

    if ((index >= 0) && (m_next < m_firstFree))
      m_next = index;
    else
      m_next = m_firstFree - 1;
  }

  Returns the indexth item in the collection. If
index is greater than or equal to the number of nodes in
the list, this returns null.
TODO: What happens if index is out of range?
Params: index – Index into the collection.
Returns: The node at the indexth position in the
  NodeList, or null if that is not a valid
  index./**
   * Returns the <code>index</code>th item in the collection. If
   * <code>index</code> is greater than or equal to the number of nodes in
   * the list, this returns <code>null</code>.
   * 
   * TODO: What happens if index is out of range?
   * 
   * @param index Index into the collection.
   * @return The node at the <code>index</code>th position in the
   *   <code>NodeList</code>, or <code>null</code> if that is not a valid
   *   index.
   */
  public Node item(int index)
  {

    runTo(index);

    return (Node) this.elementAt(index);
  }

  The number of nodes in the list. The range of valid child node indices is
0 to length-1 inclusive. Note that this operation requires
finding all the matching nodes, which may defeat attempts to defer
that work.
Returns: integer indicating how many nodes are represented by this list./**
   * The number of nodes in the list. The range of valid child node indices is
   * 0 to <code>length-1</code> inclusive. Note that this operation requires
   * finding all the matching nodes, which may defeat attempts to defer
   * that work.
   *
   * @return integer indicating how many nodes are represented by this list.
   */
  public int getLength()
  {

    runTo(-1);

    return this.size();
  }

  Add a node to the NodeSet. Not all types of NodeSets support this
operation
Params: n – Node to be added
Throws: RuntimeException – thrown if this NodeSet is not of 
a mutable type./**
   * Add a node to the NodeSet. Not all types of NodeSets support this
   * operation
   *
   * @param n Node to be added
   * @throws RuntimeException thrown if this NodeSet is not of 
   * a mutable type.
   */
  public void addNode(Node n)
  {

    if (!m_mutable)
      throw new RuntimeException(XSLMessages.createXPATHMessage(XPATHErrorResources.ER_NODESET_NOT_MUTABLE, null)); //"This NodeSet is not mutable!");

    this.addElement(n);
  }

  Insert a node at a given position.
Params: n – Node to be added
pos – Offset at which the node is to be inserted,
with 0 being the first position.
Throws: RuntimeException – thrown if this NodeSet is not of 
a mutable type./**
   * Insert a node at a given position.
   *
   * @param n Node to be added
   * @param pos Offset at which the node is to be inserted,
   * with 0 being the first position.
   * @throws RuntimeException thrown if this NodeSet is not of 
   * a mutable type.
   */
  public void insertNode(Node n, int pos)
  {

    if (!m_mutable)
      throw new RuntimeException(XSLMessages.createXPATHMessage(XPATHErrorResources.ER_NODESET_NOT_MUTABLE, null)); //"This NodeSet is not mutable!");

    insertElementAt(n, pos);
  }

  Remove a node.
Params: n – Node to be added
Throws: RuntimeException – thrown if this NodeSet is not of 
a mutable type./**
   * Remove a node.
   *
   * @param n Node to be added
   * @throws RuntimeException thrown if this NodeSet is not of 
   * a mutable type.
   */
  public void removeNode(Node n)
  {

    if (!m_mutable)
      throw new RuntimeException(XSLMessages.createXPATHMessage(XPATHErrorResources.ER_NODESET_NOT_MUTABLE, null)); //"This NodeSet is not mutable!");

    this.removeElement(n);
  }

  Copy NodeList members into this nodelist, adding in
document order.  If a node is null, don't add it.
Params: nodelist – List of nodes which should now be referenced by
this NodeSet.
Throws: RuntimeException – thrown if this NodeSet is not of 
a mutable type./**
   * Copy NodeList members into this nodelist, adding in
   * document order.  If a node is null, don't add it.
   *
   * @param nodelist List of nodes which should now be referenced by
   * this NodeSet.
   * @throws RuntimeException thrown if this NodeSet is not of 
   * a mutable type.
   */
  public void addNodes(NodeList nodelist)
  {

    if (!m_mutable)
      throw new RuntimeException(XSLMessages.createXPATHMessage(XPATHErrorResources.ER_NODESET_NOT_MUTABLE, null)); //"This NodeSet is not mutable!");

    if (null != nodelist)  // defensive to fix a bug that Sanjiva reported.
    {
      int nChildren = nodelist.getLength();

      for (int i = 0; i < nChildren; i++)
      {
        Node obj = nodelist.item(i);

        if (null != obj)
        {
          addElement(obj);
        }
      }
    }

    // checkDups();
  }

  Copy NodeList members into this nodelist, adding in
document order.  Only genuine node references will be copied;
nulls appearing in the source NodeSet will
not be added to this one. 
 In case you're wondering why this function is needed: NodeSet
implements both NodeIterator and NodeList. If this method isn't
provided, Java can't decide which of those to use when addNodes()
is invoked. Providing the more-explicit match avoids that
ambiguity.)
Params: ns – NodeSet whose members should be merged into this NodeSet.
Throws: RuntimeException – thrown if this NodeSet is not of 
a mutable type./**
   * <p>Copy NodeList members into this nodelist, adding in
   * document order.  Only genuine node references will be copied;
   * nulls appearing in the source NodeSet will
   * not be added to this one. </p>
   * 
   * <p> In case you're wondering why this function is needed: NodeSet
   * implements both NodeIterator and NodeList. If this method isn't
   * provided, Java can't decide which of those to use when addNodes()
   * is invoked. Providing the more-explicit match avoids that
   * ambiguity.)</p>
   *
   * @param ns NodeSet whose members should be merged into this NodeSet.
   * @throws RuntimeException thrown if this NodeSet is not of 
   * a mutable type.
   */
  public void addNodes(NodeSet ns)
  {

    if (!m_mutable)
      throw new RuntimeException(XSLMessages.createXPATHMessage(XPATHErrorResources.ER_NODESET_NOT_MUTABLE, null)); //"This NodeSet is not mutable!");

    addNodes((NodeIterator) ns);
  }

  Copy NodeList members into this nodelist, adding in
document order.  Null references are not added.
Params: iterator – NodeIterator which yields the nodes to be added.
Throws: RuntimeException – thrown if this NodeSet is not of 
a mutable type./**
   * Copy NodeList members into this nodelist, adding in
   * document order.  Null references are not added.
   *
   * @param iterator NodeIterator which yields the nodes to be added.
   * @throws RuntimeException thrown if this NodeSet is not of 
   * a mutable type.
   */
  public void addNodes(NodeIterator iterator)
  {

    if (!m_mutable)
      throw new RuntimeException(XSLMessages.createXPATHMessage(XPATHErrorResources.ER_NODESET_NOT_MUTABLE, null)); //"This NodeSet is not mutable!");

    if (null != iterator)  // defensive to fix a bug that Sanjiva reported.
    {
      Node obj;

      while (null != (obj = iterator.nextNode()))
      {
        addElement(obj);
      }
    }

    // checkDups();
  }

  Copy NodeList members into this nodelist, adding in
document order.  If a node is null, don't add it.
Params: nodelist – List of nodes to be added
support – The XPath runtime context.
Throws: RuntimeException – thrown if this NodeSet is not of 
a mutable type./**
   * Copy NodeList members into this nodelist, adding in
   * document order.  If a node is null, don't add it.
   *
   * @param nodelist List of nodes to be added
   * @param support The XPath runtime context.
   * @throws RuntimeException thrown if this NodeSet is not of 
   * a mutable type.
   */
  public void addNodesInDocOrder(NodeList nodelist, XPathContext support)
  {

    if (!m_mutable)
      throw new RuntimeException(XSLMessages.createXPATHMessage(XPATHErrorResources.ER_NODESET_NOT_MUTABLE, null)); //"This NodeSet is not mutable!");

    int nChildren = nodelist.getLength();

    for (int i = 0; i < nChildren; i++)
    {
      Node node = nodelist.item(i);

      if (null != node)
      {
        addNodeInDocOrder(node, support);
      }
    }
  }

  Copy NodeList members into this nodelist, adding in
document order.  If a node is null, don't add it.
Params: iterator – NodeIterator which yields the nodes to be added.
support – The XPath runtime context.
Throws: RuntimeException – thrown if this NodeSet is not of 
a mutable type./**
   * Copy NodeList members into this nodelist, adding in
   * document order.  If a node is null, don't add it.
   *
   * @param iterator NodeIterator which yields the nodes to be added.
   * @param support The XPath runtime context.
   * @throws RuntimeException thrown if this NodeSet is not of 
   * a mutable type.
   */
  public void addNodesInDocOrder(NodeIterator iterator, XPathContext support)
  {

    if (!m_mutable)
      throw new RuntimeException(XSLMessages.createXPATHMessage(XPATHErrorResources.ER_NODESET_NOT_MUTABLE, null)); //"This NodeSet is not mutable!");

    Node node;

    while (null != (node = iterator.nextNode()))
    {
      addNodeInDocOrder(node, support);
    }
  }

  Add the node list to this node set in document order.
Params: start – index.
end – index.
testIndex – index.
nodelist – The nodelist to add.
support – The XPath runtime context.
Throws: RuntimeException – thrown if this NodeSet is not of 
a mutable type.
Returns: false always./**
   * Add the node list to this node set in document order.
   *
   * @param start index.
   * @param end index.
   * @param testIndex index.
   * @param nodelist The nodelist to add.
   * @param support The XPath runtime context.
   *
   * @return false always.
   * @throws RuntimeException thrown if this NodeSet is not of 
   * a mutable type.
   */
  private boolean addNodesInDocOrder(int start, int end, int testIndex,
                                     NodeList nodelist, XPathContext support)
  {

    if (!m_mutable)
      throw new RuntimeException(XSLMessages.createXPATHMessage(XPATHErrorResources.ER_NODESET_NOT_MUTABLE, null)); //"This NodeSet is not mutable!");

    boolean foundit = false;
    int i;
    Node node = nodelist.item(testIndex);

    for (i = end; i >= start; i--)
    {
      Node child = (Node) elementAt(i);

      if (child == node)
      {
        i = -2;  // Duplicate, suppress insert

        break;
      }

      if (!DOM2Helper.isNodeAfter(node, child))
      {
        insertElementAt(node, i + 1);

        testIndex--;

        if (testIndex > 0)
        {
          boolean foundPrev = addNodesInDocOrder(0, i, testIndex, nodelist,
                                                 support);

          if (!foundPrev)
          {
            addNodesInDocOrder(i, size() - 1, testIndex, nodelist, support);
          }
        }

        break;
      }
    }

    if (i == -1)
    {
      insertElementAt(node, 0);
    }

    return foundit;
  }

  Add the node into a vector of nodes where it should occur in
document order.
Params: node – The node to be added.
test – true if we should test for doc order
support – The XPath runtime context.
Throws: RuntimeException – thrown if this NodeSet is not of 
a mutable type.
Returns: insertIndex./**
   * Add the node into a vector of nodes where it should occur in
   * document order.
   * @param node The node to be added.
   * @param test true if we should test for doc order
   * @param support The XPath runtime context.
   * @return insertIndex.
   * @throws RuntimeException thrown if this NodeSet is not of 
   * a mutable type.
   */
  public int addNodeInDocOrder(Node node, boolean test, XPathContext support)
  {

    if (!m_mutable)
      throw new RuntimeException(XSLMessages.createXPATHMessage(XPATHErrorResources.ER_NODESET_NOT_MUTABLE, null)); //XSLMessages.createXPATHMessage(XPATHErrorResources.ER_NODESET_NOT_MUTABLE, null)); //"This NodeSet is not mutable!");

    int insertIndex = -1;

    if (test)
    {

      // This needs to do a binary search, but a binary search 
      // is somewhat tough because the sequence test involves 
      // two nodes.
      int size = size(), i;

      for (i = size - 1; i >= 0; i--)
      {
        Node child = (Node) elementAt(i);

        if (child == node)
        {
          i = -2;  // Duplicate, suppress insert

          break;
        }

        if (!DOM2Helper.isNodeAfter(node, child))
        {
          break;
        }
      }

      if (i != -2)
      {
        insertIndex = i + 1;

        insertElementAt(node, insertIndex);
      }
    }
    else
    {
      insertIndex = this.size();

      boolean foundit = false;

      for (int i = 0; i < insertIndex; i++)
      {
        if (this.item(i).equals(node))
        {
          foundit = true;

          break;
        }
      }

      if (!foundit)
        addElement(node);
    }

    // checkDups();
    return insertIndex;
  }  // end addNodeInDocOrder(Vector v, Object obj)

  Add the node into a vector of nodes where it should occur in
document order.
Params: node – The node to be added.
support – The XPath runtime context.
Throws: RuntimeException – thrown if this NodeSet is not of 
a mutable type.
Returns: The index where it was inserted./**
   * Add the node into a vector of nodes where it should occur in
   * document order.
   * @param node The node to be added.
   * @param support The XPath runtime context.
   *
   * @return The index where it was inserted.
   * @throws RuntimeException thrown if this NodeSet is not of 
   * a mutable type.
   */
  public int addNodeInDocOrder(Node node, XPathContext support)
  {

    if (!m_mutable)
      throw new RuntimeException(XSLMessages.createXPATHMessage(XPATHErrorResources.ER_NODESET_NOT_MUTABLE, null)); //"This NodeSet is not mutable!");

    return addNodeInDocOrder(node, true, support);
  }  // end addNodeInDocOrder(Vector v, Object obj)


  If this node is being used as an iterator, the next index that nextNode()
 will return.  /** If this node is being used as an iterator, the next index that nextNode()
   *  will return.  */
  transient protected int m_next = 0;

  Get the current position, which is one less than
the next nextNode() call will retrieve.  i.e. if
you call getCurrentPos() and the return is 0, the next
fetch will take place at index 1.
Returns: The the current position index./**
   * Get the current position, which is one less than
   * the next nextNode() call will retrieve.  i.e. if
   * you call getCurrentPos() and the return is 0, the next
   * fetch will take place at index 1.
   *
   * @return The the current position index.
   */
  public int getCurrentPos()
  {
    return m_next;
  }

  Set the current position in the node set.
Params: i – Must be a valid index.
Throws: RuntimeException – thrown if this NodeSet is not of 
a cached type, and thus doesn't permit indexed access./**
   * Set the current position in the node set.
   * @param i Must be a valid index.
   * @throws RuntimeException thrown if this NodeSet is not of 
   * a cached type, and thus doesn't permit indexed access.
   */
  public void setCurrentPos(int i)
  {

    if (!m_cacheNodes)
      throw new RuntimeException(
        XSLMessages.createXPATHMessage(XPATHErrorResources.ER_NODESET_CANNOT_INDEX, null)); //"This NodeSet can not do indexing or counting functions!");

    m_next = i;
  }

  Return the last fetched node.  Needed to support the UnionPathIterator.
Throws: RuntimeException – thrown if this NodeSet is not of 
a cached type, and thus doesn't permit indexed access.
Returns: the last fetched node./**
   * Return the last fetched node.  Needed to support the UnionPathIterator.
   *
   * @return the last fetched node.
   * @throws RuntimeException thrown if this NodeSet is not of 
   * a cached type, and thus doesn't permit indexed access.
   */
  public Node getCurrentNode()
  {

    if (!m_cacheNodes)
      throw new RuntimeException(
        XSLMessages.createXPATHMessage(XPATHErrorResources.ER_NODESET_CANNOT_INDEX, null)); //"This NodeSet can not do indexing or counting functions!");

    int saved = m_next;
    Node n = (m_next < m_firstFree) ? elementAt(m_next) : null;
    m_next = saved; // HACK: I think this is a bit of a hack.  -sb
    return n;
  }

  True if this list can be mutated.  /** True if this list can be mutated.  */
  transient protected boolean m_mutable = true;

  True if this list is cached.
 @serial  /** True if this list is cached.
   *  @serial  */
  transient protected boolean m_cacheNodes = true;

  Get whether or not this is a cached node set.
Returns: True if this list is cached./**
   * Get whether or not this is a cached node set.
   *
   *
   * @return True if this list is cached.
   */
  public boolean getShouldCacheNodes()
  {
    return m_cacheNodes;
  }

  If setShouldCacheNodes(true) is called, then nodes will
be cached.  They are not cached by default. This switch must
be set before the first call to nextNode is made, to ensure
that all nodes are cached.
Params: b – true if this node set should be cached.
Throws: RuntimeException – thrown if an attempt is made to
request caching after we've already begun stepping through the
nodes in this set./**
   * If setShouldCacheNodes(true) is called, then nodes will
   * be cached.  They are not cached by default. This switch must
   * be set before the first call to nextNode is made, to ensure
   * that all nodes are cached.
   *
   * @param b true if this node set should be cached.
   * @throws RuntimeException thrown if an attempt is made to
   * request caching after we've already begun stepping through the
   * nodes in this set.
  */
  public void setShouldCacheNodes(boolean b)
  {

    if (!isFresh())
      throw new RuntimeException(
        XSLMessages.createXPATHMessage(XPATHErrorResources.ER_CANNOT_CALL_SETSHOULDCACHENODE, null)); //"Can not call setShouldCacheNodes after nextNode has been called!");

    m_cacheNodes = b;
    m_mutable = true;
  }
  
  
  transient private int m_last = 0;
  
  public int getLast()
  {
    return m_last;
  }
  
  public void setLast(int last)
  {
    m_last = last;
  }
  
  Size of blocks to allocate.
 @serial          /** Size of blocks to allocate.
   *  @serial          */
  private int m_blocksize;

  Array of nodes this points to.
 @serial          /** Array of nodes this points to.
   *  @serial          */
  Node m_map[];

  Number of nodes in this NodeVector.
 @serial          /** Number of nodes in this NodeVector.
   *  @serial          */
  protected int m_firstFree = 0;

  Size of the array this points to.
 @serial           /** Size of the array this points to.
   *  @serial           */
  private int m_mapSize;  // lazy initialization

  Get a cloned LocPathIterator.
Throws: CloneNotSupportedException – 
Returns: A clone of this/**
   * Get a cloned LocPathIterator.
   *
   * @return A clone of this
   *
   * @throws CloneNotSupportedException
   */
  public Object clone() throws CloneNotSupportedException
  {

    NodeSet clone = (NodeSet) super.clone();

    if ((null != this.m_map) && (this.m_map == clone.m_map))
    {
      clone.m_map = new Node[this.m_map.length];

      System.arraycopy(this.m_map, 0, clone.m_map, 0, this.m_map.length);
    }

    return clone;
  }

  Get the length of the list.
Returns: Number of nodes in this NodeVector/**
   * Get the length of the list.
   *
   * @return Number of nodes in this NodeVector
   */
  public int size()
  {
    return m_firstFree;
  }

  Append a Node onto the vector.
Params: value – Node to add to the vector/**
   * Append a Node onto the vector.
   *
   * @param value Node to add to the vector
   */
  public void addElement(Node value)
  {
    if (!m_mutable)
      throw new RuntimeException(XSLMessages.createXPATHMessage(XPATHErrorResources.ER_NODESET_NOT_MUTABLE, null)); //"This NodeSet is not mutable!");

    if ((m_firstFree + 1) >= m_mapSize)
    {
      if (null == m_map)
      {
        m_map = new Node[m_blocksize];
        m_mapSize = m_blocksize;
      }
      else
      {
        m_mapSize += m_blocksize;

        Node newMap[] = new Node[m_mapSize];

        System.arraycopy(m_map, 0, newMap, 0, m_firstFree + 1);

        m_map = newMap;
      }
    }

    m_map[m_firstFree] = value;

    m_firstFree++;
  }

  Append a Node onto the vector.
Params: value – Node to add to the vector/**
   * Append a Node onto the vector.
   *
   * @param value Node to add to the vector
   */
  public final void push(Node value)
  {

    int ff = m_firstFree;

    if ((ff + 1) >= m_mapSize)
    {
      if (null == m_map)
      {
        m_map = new Node[m_blocksize];
        m_mapSize = m_blocksize;
      }
      else
      {
        m_mapSize += m_blocksize;

        Node newMap[] = new Node[m_mapSize];

        System.arraycopy(m_map, 0, newMap, 0, ff + 1);

        m_map = newMap;
      }
    }

    m_map[ff] = value;

    ff++;

    m_firstFree = ff;
  }

  Pop a node from the tail of the vector and return the result.
Returns: the node at the tail of the vector/**
   * Pop a node from the tail of the vector and return the result.
   *
   * @return the node at the tail of the vector
   */
  public final Node pop()
  {

    m_firstFree--;

    Node n = m_map[m_firstFree];

    m_map[m_firstFree] = null;

    return n;
  }

  Pop a node from the tail of the vector and return the
top of the stack after the pop.
Returns: The top of the stack after it's been popped/**
   * Pop a node from the tail of the vector and return the
   * top of the stack after the pop.
   *
   * @return The top of the stack after it's been popped 
   */
  public final Node popAndTop()
  {

    m_firstFree--;

    m_map[m_firstFree] = null;

    return (m_firstFree == 0) ? null : m_map[m_firstFree - 1];
  }

  Pop a node from the tail of the vector.
/**
   * Pop a node from the tail of the vector.
   */
  public final void popQuick()
  {

    m_firstFree--;

    m_map[m_firstFree] = null;
  }

  Return the node at the top of the stack without popping the stack.
Special purpose method for TransformerImpl, pushElemTemplateElement.
Performance critical.
Returns: Node at the top of the stack or null if stack is empty./**
   * Return the node at the top of the stack without popping the stack.
   * Special purpose method for TransformerImpl, pushElemTemplateElement.
   * Performance critical.
   *
   * @return Node at the top of the stack or null if stack is empty.  
   */
  public final Node peepOrNull()
  {
    return ((null != m_map) && (m_firstFree > 0))
           ? m_map[m_firstFree - 1] : null;
  }

  Push a pair of nodes into the stack.  
Special purpose method for TransformerImpl, pushElemTemplateElement.
Performance critical.
Params: v1 – First node to add to vector
v2 – Second node to add to vector/**
   * Push a pair of nodes into the stack.  
   * Special purpose method for TransformerImpl, pushElemTemplateElement.
   * Performance critical.
   *
   * @param v1 First node to add to vector
   * @param v2 Second node to add to vector
   */
  public final void pushPair(Node v1, Node v2)
  {

    if (null == m_map)
    {
      m_map = new Node[m_blocksize];
      m_mapSize = m_blocksize;
    }
    else
    {
      if ((m_firstFree + 2) >= m_mapSize)
      {
        m_mapSize += m_blocksize;

        Node newMap[] = new Node[m_mapSize];

        System.arraycopy(m_map, 0, newMap, 0, m_firstFree);

        m_map = newMap;
      }
    }

    m_map[m_firstFree] = v1;
    m_map[m_firstFree + 1] = v2;
    m_firstFree += 2;
  }

  Pop a pair of nodes from the tail of the stack. 
Special purpose method for TransformerImpl, pushElemTemplateElement.
Performance critical.
/**
   * Pop a pair of nodes from the tail of the stack. 
   * Special purpose method for TransformerImpl, pushElemTemplateElement.
   * Performance critical.
   */
  public final void popPair()
  {

    m_firstFree -= 2;
    m_map[m_firstFree] = null;
    m_map[m_firstFree + 1] = null;
  }

  Set the tail of the stack to the given node.
Special purpose method for TransformerImpl, pushElemTemplateElement.
Performance critical.
Params: n – Node to set at the tail of vector/**
   * Set the tail of the stack to the given node.
   * Special purpose method for TransformerImpl, pushElemTemplateElement.
   * Performance critical.
   *
   * @param n Node to set at the tail of vector
   */
  public final void setTail(Node n)
  {
    m_map[m_firstFree - 1] = n;
  }

  Set the given node one position from the tail.
Special purpose method for TransformerImpl, pushElemTemplateElement.
Performance critical.
Params: n – Node to set/**
   * Set the given node one position from the tail.
   * Special purpose method for TransformerImpl, pushElemTemplateElement.
   * Performance critical.
   *
   * @param n Node to set
   */
  public final void setTailSub1(Node n)
  {
    m_map[m_firstFree - 2] = n;
  }

  Return the node at the tail of the vector without popping
Special purpose method for TransformerImpl, pushElemTemplateElement.
Performance critical.
Returns: Node at the tail of the vector/**
   * Return the node at the tail of the vector without popping
   * Special purpose method for TransformerImpl, pushElemTemplateElement.
   * Performance critical.
   *
   * @return Node at the tail of the vector
   */
  public final Node peepTail()
  {
    return m_map[m_firstFree - 1];
  }

  Return the node one position from the tail without popping.
Special purpose method for TransformerImpl, pushElemTemplateElement.
Performance critical.
Returns: Node one away from the tail/**
   * Return the node one position from the tail without popping.
   * Special purpose method for TransformerImpl, pushElemTemplateElement.
   * Performance critical.
   *
   * @return Node one away from the tail
   */
  public final Node peepTailSub1()
  {
    return m_map[m_firstFree - 2];
  }

  Inserts the specified node in this vector at the specified index.
Each component in this vector with an index greater or equal to
the specified index is shifted upward to have an index one greater
than the value it had previously.
Params: value – Node to insert
at – Position where to insert/**
   * Inserts the specified node in this vector at the specified index.
   * Each component in this vector with an index greater or equal to
   * the specified index is shifted upward to have an index one greater
   * than the value it had previously.
   *
   * @param value Node to insert
   * @param at Position where to insert
   */
  public void insertElementAt(Node value, int at)
  {
    if (!m_mutable)
      throw new RuntimeException(XSLMessages.createXPATHMessage(XPATHErrorResources.ER_NODESET_NOT_MUTABLE, null)); //"This NodeSet is not mutable!");

    if (null == m_map)
    {
      m_map = new Node[m_blocksize];
      m_mapSize = m_blocksize;
    }
    else if ((m_firstFree + 1) >= m_mapSize)
    {
      m_mapSize += m_blocksize;

      Node newMap[] = new Node[m_mapSize];

      System.arraycopy(m_map, 0, newMap, 0, m_firstFree + 1);

      m_map = newMap;
    }

    if (at <= (m_firstFree - 1))
    {
      System.arraycopy(m_map, at, m_map, at + 1, m_firstFree - at);
    }

    m_map[at] = value;

    m_firstFree++;
  }

  Append the nodes to the list.
Params: nodes – NodeVector to append to this list/**
   * Append the nodes to the list.
   *
   * @param nodes NodeVector to append to this list
   */
  public void appendNodes(NodeSet nodes)
  {

    int nNodes = nodes.size();

    if (null == m_map)
    {
      m_mapSize = nNodes + m_blocksize;
      m_map = new Node[m_mapSize];
    }
    else if ((m_firstFree + nNodes) >= m_mapSize)
    {
      m_mapSize += (nNodes + m_blocksize);

      Node newMap[] = new Node[m_mapSize];

      System.arraycopy(m_map, 0, newMap, 0, m_firstFree + nNodes);

      m_map = newMap;
    }

    System.arraycopy(nodes.m_map, 0, m_map, m_firstFree, nNodes);

    m_firstFree += nNodes;
  }

  Inserts the specified node in this vector at the specified index.
Each component in this vector with an index greater or equal to
the specified index is shifted upward to have an index one greater
than the value it had previously.
/**
   * Inserts the specified node in this vector at the specified index.
   * Each component in this vector with an index greater or equal to
   * the specified index is shifted upward to have an index one greater
   * than the value it had previously.
   */
  public void removeAllElements()
  {

    if (null == m_map)
      return;

    for (int i = 0; i < m_firstFree; i++)
    {
      m_map[i] = null;
    }

    m_firstFree = 0;
  }

  Removes the first occurrence of the argument from this vector.
If the object is found in this vector, each component in the vector
with an index greater or equal to the object's index is shifted
downward to have an index one smaller than the value it had
previously.
Params: s – Node to remove from the list
Returns: True if the node was successfully removed/**
   * Removes the first occurrence of the argument from this vector.
   * If the object is found in this vector, each component in the vector
   * with an index greater or equal to the object's index is shifted
   * downward to have an index one smaller than the value it had
   * previously.
   *
   * @param s Node to remove from the list
   *
   * @return True if the node was successfully removed
   */
  public boolean removeElement(Node s)
  {
    if (!m_mutable)
      throw new RuntimeException(XSLMessages.createXPATHMessage(XPATHErrorResources.ER_NODESET_NOT_MUTABLE, null)); //"This NodeSet is not mutable!");

    if (null == m_map)
      return false;

    for (int i = 0; i < m_firstFree; i++)
    {
      Node node = m_map[i];

      if ((null != node) && node.equals(s))
      {
        if (i < m_firstFree - 1)
          System.arraycopy(m_map, i + 1, m_map, i, m_firstFree - i - 1);

        m_firstFree--;
        m_map[m_firstFree] = null;

        return true;
      }
    }

    return false;
  }

  Deletes the component at the specified index. Each component in
this vector with an index greater or equal to the specified
index is shifted downward to have an index one smaller than
the value it had previously.
Params: i – Index of node to remove/**
   * Deletes the component at the specified index. Each component in
   * this vector with an index greater or equal to the specified
   * index is shifted downward to have an index one smaller than
   * the value it had previously.
   *
   * @param i Index of node to remove
   */
  public void removeElementAt(int i)
  {

    if (null == m_map)
      return;
      
    if (i >= m_firstFree)
      throw new ArrayIndexOutOfBoundsException(i + " >= " + m_firstFree);
    else if (i < 0)
      throw new ArrayIndexOutOfBoundsException(i);

    if (i < m_firstFree - 1)
      System.arraycopy(m_map, i + 1, m_map, i, m_firstFree - i - 1);

    m_firstFree--;
    m_map[m_firstFree] = null;
  }

  Sets the component at the specified index of this vector to be the
specified object. The previous component at that position is discarded.
The index must be a value greater than or equal to 0 and less
than the current size of the vector.
Params: node – Node to set
index – Index of where to set the node/**
   * Sets the component at the specified index of this vector to be the
   * specified object. The previous component at that position is discarded.
   *
   * The index must be a value greater than or equal to 0 and less
   * than the current size of the vector.
   *
   * @param node Node to set
   * @param index Index of where to set the node
   */
  public void setElementAt(Node node, int index)
  {
    if (!m_mutable)
      throw new RuntimeException(XSLMessages.createXPATHMessage(XPATHErrorResources.ER_NODESET_NOT_MUTABLE, null)); //"This NodeSet is not mutable!");

    if (null == m_map)
    {
      m_map = new Node[m_blocksize];
      m_mapSize = m_blocksize;
    }

    m_map[index] = node;
  }

  Get the nth element.
Params: i – Index of node to get
Returns: Node at specified index/**
   * Get the nth element.
   *
   * @param i Index of node to get
   *
   * @return Node at specified index
   */
  public Node elementAt(int i)
  {

    if (null == m_map)
      return null;

    return m_map[i];
  }

  Tell if the table contains the given node.
Params: s – Node to look for
Returns: True if the given node was found./**
   * Tell if the table contains the given node.
   *
   * @param s Node to look for
   *
   * @return True if the given node was found.
   */
  public boolean contains(Node s)
  {
    runTo(-1);

    if (null == m_map)
      return false;

    for (int i = 0; i < m_firstFree; i++)
    {
      Node node = m_map[i];

      if ((null != node) && node.equals(s))
        return true;
    }

    return false;
  }

  Searches for the first occurence of the given argument,
beginning the search at index, and testing for equality
using the equals method.
Params: elem – Node to look for
index – Index of where to start the search
Returns: the index of the first occurrence of the object
argument in this vector at position index or later in the
vector; returns -1 if the object is not found./**
   * Searches for the first occurence of the given argument,
   * beginning the search at index, and testing for equality
   * using the equals method.
   *
   * @param elem Node to look for
   * @param index Index of where to start the search
   * @return the index of the first occurrence of the object
   * argument in this vector at position index or later in the
   * vector; returns -1 if the object is not found.
   */
  public int indexOf(Node elem, int index)
  {
    runTo(-1);

    if (null == m_map)
      return -1;

    for (int i = index; i < m_firstFree; i++)
    {
      Node node = m_map[i];

      if ((null != node) && node.equals(elem))
        return i;
    }

    return -1;
  }

  Searches for the first occurence of the given argument,
beginning the search at index, and testing for equality
using the equals method.
Params: elem – Node to look for
Returns: the index of the first occurrence of the object
argument in this vector at position index or later in the
vector; returns -1 if the object is not found./**
   * Searches for the first occurence of the given argument,
   * beginning the search at index, and testing for equality
   * using the equals method.
   *
   * @param elem Node to look for 
   * @return the index of the first occurrence of the object
   * argument in this vector at position index or later in the
   * vector; returns -1 if the object is not found.
   */
  public int indexOf(Node elem)
  {
    runTo(-1);

    if (null == m_map)
      return -1;

    for (int i = 0; i < m_firstFree; i++)
    {
      Node node = m_map[i];

      if ((null != node) && node.equals(elem))
        return i;
    }

    return -1;
  }

}
Throws:	CloneNotSupportedException – if this subclass of NodeSet does not support the clone() operation.
Returns:	a new NodeSet of the same type, having the same state... except that the reset() operation has been called.
Throws:	DOMException – INVALID_STATE_ERR: Raised if this method is called after the `detach` method was invoked.
Returns:	The next `Node` in the set being iterated over, or `null` if there are no more members in that set.
Params:	index – Position to advance (or retreat) to, with 0 requesting the reset ("fresh") position and -1 (or indeed any out-of-bounds value) requesting the final position.
Throws:	RuntimeException – thrown if this NodeSet is not one of the types which supports indexing/counting.
Params:	index – Index into the collection.
Returns:	The node at the `index`th position in the `NodeList`, or `null` if that is not a valid index.
Params:	n – Node to be added
Throws:	RuntimeException – thrown if this NodeSet is not of a mutable type.
Params:	n – Node to be added pos – Offset at which the node is to be inserted, with 0 being the first position.
Throws:	RuntimeException – thrown if this NodeSet is not of a mutable type.
Params:	nodelist – List of nodes which should now be referenced by this NodeSet.
Throws:	RuntimeException – thrown if this NodeSet is not of a mutable type.
Params:	ns – NodeSet whose members should be merged into this NodeSet.
Throws:	RuntimeException – thrown if this NodeSet is not of a mutable type.
Params:	iterator – NodeIterator which yields the nodes to be added.
Throws:	RuntimeException – thrown if this NodeSet is not of a mutable type.
Params:	nodelist – List of nodes to be added support – The XPath runtime context.
Throws:	RuntimeException – thrown if this NodeSet is not of a mutable type.
Params:	start – index. end – index. testIndex – index. nodelist – The nodelist to add. support – The XPath runtime context.
Throws:	RuntimeException – thrown if this NodeSet is not of a mutable type.
Returns:	false always.
Params:	node – The node to be added. test – true if we should test for doc order support – The XPath runtime context.
Throws:	RuntimeException – thrown if this NodeSet is not of a mutable type.
Returns:	insertIndex.
Params:	node – The node to be added. support – The XPath runtime context.
Throws:	RuntimeException – thrown if this NodeSet is not of a mutable type.
Returns:	The index where it was inserted.
Params:	i – Must be a valid index.
Throws:	RuntimeException – thrown if this NodeSet is not of a cached type, and thus doesn't permit indexed access.
Params:	b – true if this node set should be cached.
Throws:	RuntimeException – thrown if an attempt is made to request caching after we've already begun stepping through the nodes in this set.
Throws:	CloneNotSupportedException –
Returns:	A clone of this
Params:	s – Node to remove from the list
Returns:	True if the node was successfully removed
Params:	i – Index of node to get
Returns:	Node at specified index
Params:	s – Node to look for
Returns:	True if the given node was found.
Params:	elem – Node to look for index – Index of where to start the search
Returns:	the index of the first occurrence of the object argument in this vector at position index or later in the vector; returns -1 if the object is not found.
/

xalan/ serializer/ 2.7.2/ org/apache/xpath/NodeSet.java
