org.jruby/jruby-core/9.2.14.0 : org/jruby/embed/EmbedRubyInstanceConfigAdapter.java

EmbedRubyInstanceConfigAdapter
https://github.com/jruby/jruby/jruby-core: JRuby is the effort to recreate the Ruby (https://www.ruby-lang.org) interpreter in Java. (JRuby)
headius
enebo
wmeissner
BanzaiMan
mkristian
 **** BEGIN LICENSE BLOCK *****
Version: EPL 2.0/GPL 2.0/LGPL 2.1
The contents of this file are subject to the Eclipse Public
License Version 2.0 (the "License"); you may not use this file
except in compliance with the License. You may obtain a copy of
the License at http://www.eclipse.org/legal/epl-v20.html
Software distributed under the License is distributed on an "AS
IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
implied. See the License for the specific language governing
rights and limitations under the License.
Copyright (C) 2010 Yoko Harada 
Alternatively, the contents of this file may be used under the terms of
either of the GNU General Public License Version 2 or later (the "GPL"),
or the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
in which case the provisions of the GPL or the LGPL are applicable instead
of those above. If you wish to allow use of your version of this file only
under the terms of either the GPL or the LGPL, and not to allow others to
use your version of this file under the terms of the EPL, indicate your
decision by deleting the provisions above and replace them with the notice
and other provisions required by the GPL or the LGPL. If you do not delete
the provisions above, a recipient may use your version of this file under
the terms of any one of the EPL, the GPL or the LGPL.
 **** END LICENSE BLOCK *****
/**
 * **** BEGIN LICENSE BLOCK *****
 * Version: EPL 2.0/GPL 2.0/LGPL 2.1
 *
 * The contents of this file are subject to the Eclipse Public
 * License Version 2.0 (the "License"); you may not use this file
 * except in compliance with the License. You may obtain a copy of
 * the License at http://www.eclipse.org/legal/epl-v20.html
 *
 * Software distributed under the License is distributed on an "AS
 * IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
 * implied. See the License for the specific language governing
 * rights and limitations under the License.
 *
 * Copyright (C) 2010 Yoko Harada <yokolet@gmail.com>
 *
 * Alternatively, the contents of this file may be used under the terms of
 * either of the GNU General Public License Version 2 or later (the "GPL"),
 * or the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
 * in which case the provisions of the GPL or the LGPL are applicable instead
 * of those above. If you wish to allow use of your version of this file only
 * under the terms of either the GPL or the LGPL, and not to allow others to
 * use your version of this file under the terms of the EPL, indicate your
 * decision by deleting the provisions above and replace them with the notice
 * and other provisions required by the GPL or the LGPL. If you do not delete
 * the provisions above, a recipient may use your version of this file under
 * the terms of any one of the EPL, the GPL or the LGPL.
 * **** END LICENSE BLOCK *****
 */
package org.jruby.embed;

import java.io.InputStream;
import java.io.PrintStream;
import java.io.Reader;
import java.io.Writer;
import java.util.List;
import java.util.Map;
import org.jruby.Profile;
import org.jruby.RubyInstanceConfig.CompileMode;
import org.jruby.RubyInstanceConfig.LoadServiceCreator;
import org.jruby.util.KCode;

This interface defines methods to configure Ruby runtime for embedding.
Author: Yoko Harada 
Since: JRuby 1.5.0/**
 * This interface defines methods to configure Ruby runtime for embedding.
 *
 * @since JRuby 1.5.0
 * 
 * @author Yoko Harada <yokolet@gmail.com>
 */
public interface EmbedRubyInstanceConfigAdapter {
    Returns a list of load paths for Ruby scripts/libraries. If no paths is
given, the list is created from java.class.path System property.
Returns: a list of load paths./**
     * Returns a list of load paths for Ruby scripts/libraries. If no paths is
     * given, the list is created from java.class.path System property.
     *
     * @return a list of load paths.
     */
    public List<String> getLoadPaths();

    Changes a list of load paths Ruby scripts/libraries. The default value
is an empty array. If no paths is given, the list is created from
java.class.path System property. This value can be set by
org.jruby.embed.class.path System property.
Params: paths – a new list of load paths./**
     * Changes a list of load paths Ruby scripts/libraries. The default value
     * is an empty array. If no paths is given, the list is created from
     * java.class.path System property. This value can be set by
     * org.jruby.embed.class.path System property.
     *
     * @param paths a new list of load paths.
     */
    public void setLoadPaths(List<String> paths);

    Returns an input stream assigned to STDIN and $stdin.
Returns: input stream of STDIN and $stdin/**
     * Returns an input stream assigned to STDIN and $stdin.
     * 
     * @return input stream of STDIN and $stdin
     */
    public InputStream getInput();

    Changes STDIN and $stdin to a given input stream. The default standard input
is java.lang.System.in.
Params: istream – an input stream to be set/**
     * Changes STDIN and $stdin to a given input stream. The default standard input
     * is java.lang.System.in.
     * 
     * @param istream an input stream to be set
     */
    public void setInput(InputStream istream);

    Changes STDIN and $stdin to a given reader. No reader is set by default.
Params: reader – a reader to be set/**
     * Changes STDIN and $stdin to a given reader. No reader is set by default.
     * 
     * @param reader a reader to be set
     */
    public void setInput(Reader reader);

    Returns an output stream assigned to STDOUT and $stdout
Returns: an output stream of STDOUT and $stdout/**
     * Returns an output stream assigned to STDOUT and $stdout
     *
     * @return an output stream of STDOUT and $stdout
     */
    public PrintStream getOutput();

    Changes STDOUT and $stdout to a given output stream. The default standard
output is java.lang.System.out.
Params: pstream – an output stream to be set/**
     * Changes STDOUT and $stdout to a given output stream. The default standard
     * output is java.lang.System.out.
     * 
     * @param pstream an output stream to be set
     */
    public void setOutput(PrintStream pstream);

    Changes STDOUT and $stdout to a given writer. No writer is set by default.
Params: writer – a writer to be set/**
     * Changes STDOUT and $stdout to a given writer. No writer is set by default.
     * 
     * @param writer a writer to be set
     */
    public void setOutput(Writer writer);

    Returns an error stream assigned to STDERR and $stderr.
Returns: output stream for error stream/**
     * Returns an error stream assigned to STDERR and $stderr.
     * 
     * @return output stream for error stream
     */
    public PrintStream getError();

    Changes STDERR and $stderr to a gievn print stream. The default standard error
is java.lang.System.err.
Params: pstream – a print stream to be set/**
     * Changes STDERR and $stderr to a gievn print stream. The default standard error
     * is java.lang.System.err.
     * 
     * @param pstream a print stream to be set
     */
    public void setError(PrintStream pstream);

    Changes STDERR and $stderr to a given writer. No writer is set by default.
Params: writer – a writer to be set/**
     * Changes STDERR and $stderr to a given writer. No writer is set by default.
     * 
     * @param writer a writer to be set
     */
    public void setError(Writer writer);

    Returns a compile mode currently chosen, which is one of CompileMode.JIT,
CompileMode.FORCE, CompileMode.OFF. The default mode is CompileMode.OFF.
Returns: a compile mode./**
     * Returns a compile mode currently chosen, which is one of CompileMode.JIT,
     * CompileMode.FORCE, CompileMode.OFF. The default mode is CompileMode.OFF.
     *
     * @return a compile mode.
     */
    public CompileMode getCompileMode();

    Changes a compile mode to a given mode, which should be one of CompileMode.JIT,
CompileMode.FORCE, CompileMode.OFF. The default value is CompileMode.OFF.
Params: mode – compile mode/**
     * Changes a compile mode to a given mode, which should be one of CompileMode.JIT,
     * CompileMode.FORCE, CompileMode.OFF. The default value is CompileMode.OFF.
     * 
     * @param mode compile mode
     */
    public void setCompileMode(CompileMode mode);

    Tests whether Ruby runs in a process or not.
Returns: true if Ruby is configured to run in a process, otherwise, false./**
     * Tests whether Ruby runs in a process or not.
     *
     * @return true if Ruby is configured to run in a process, otherwise, false.
     */
    public boolean isRunRubyInProcess();

    Changes the value to determine whether Ruby runs in a process or not. The
default value is true.
Params: inprocess – true when Ruby is set to run in the process, or false not to
run in the process./**
     * Changes the value to determine whether Ruby runs in a process or not. The
     * default value is true.
     * 
     * @param inprocess true when Ruby is set to run in the process, or false not to
     * run in the process.
     */
    public void setRunRubyInProcess(boolean inprocess);

    Tests whether the Object Space is enabled or not.
Returns: true if the Object Space is able to use, otherwise, false./**
     * Tests whether the Object Space is enabled or not.
     * 
     * @return true if the Object Space is able to use, otherwise, false.
     */
    public boolean isObjectSpaceEnabled();

    Changes the value to determine whether the Object Space is enabled or not. The
default value is false.
This value can be set by jruby.objectspace.enabled system property.
Params: enable – true to enable the Object Space, or false to disable./**
     * Changes the value to determine whether the Object Space is enabled or not. The
     * default value is false.
     *
     * This value can be set by jruby.objectspace.enabled system property.
     * 
     * @param enable true to enable the Object Space, or false to disable.
     */
    public void setObjectSpaceEnabled(boolean enable);

    Returns a map of environment variables.
Returns: a map that has environment variables' key-value pairs./**
     * Returns a map of environment variables.
     *
     * @return a map that has environment variables' key-value pairs.
     */
    public Map getEnvironment();

    Changes an environment variables' map.
Params: environment – a new map of environment variables./**
     * Changes an environment variables' map.
     *
     * @param environment a new map of environment variables.
     */
    public void setEnvironment(Map environment);

    Returns a current directory.
The default current directory is identical to a value of "user.dir" system 
property if no security restriction is set. If the "user.dir" directory is
protected by the security restriction, the default value is "/".
Returns: a current directory./**
     * Returns a current directory.
     *
     * The default current directory is identical to a value of "user.dir" system 
     * property if no security restriction is set. If the "user.dir" directory is
     * protected by the security restriction, the default value is "/".
     *
     * @return a current directory.
     */
    public String getCurrentDirectory();

    Changes a current directory to a given directory.
Params: directory – a new directory to be set./**
     * Changes a current directory to a given directory.
     *
     * @param directory a new directory to be set.
     */
    public void setCurrentDirectory(String directory);

    Returns a JRuby home directory.
The default JRuby home is the value of JRUBY_HOME environmet variable,
or "jruby.home" system property when no security restriction is set to
those directories. If none of JRUBY_HOME or jruby.home is set and jruby-complete.jar
is used, the default JRuby home is "/META-INF/jruby.home" in the jar archive.
Otherwise, "java.io.tmpdir" system property is the default value.
Returns: a JRuby home directory./**
     * Returns a JRuby home directory.
     *
     * The default JRuby home is the value of JRUBY_HOME environmet variable,
     * or "jruby.home" system property when no security restriction is set to
     * those directories. If none of JRUBY_HOME or jruby.home is set and jruby-complete.jar
     * is used, the default JRuby home is "/META-INF/jruby.home" in the jar archive.
     * Otherwise, "java.io.tmpdir" system property is the default value.
     *
     * @return a JRuby home directory.
     */
    public String getHomeDirectory();

    Changes a JRuby home directroy to a directory of a given name.
Params: home – a name of new JRuby home directory./**
     * Changes a JRuby home directroy to a directory of a given name.
     *
     * @param home a name of new JRuby home directory.
     */
    public void setHomeDirectory(String home);

    Returns a class loader object that is currently used. This loader loads
Ruby files and libraries.
Returns: a class loader object that is currently used./**
     * Returns a class loader object that is currently used. This loader loads
     * Ruby files and libraries.
     * 
     * @return a class loader object that is currently used.
     */
    public ClassLoader getClassLoader();

    Changes a class loader to a given loader.
Params: loader – a new class loader to be set./**
     * Changes a class loader to a given loader.
     * 
     * @param loader a new class loader to be set.
     */
    public void setClassLoader(ClassLoader loader);

    Returns a profiler currently used. The default profiler is Profile.DEFAULT,
which has the same behavior to Profile.ALL.
Returns: a current profiler./**
     * Returns a profiler currently used. The default profiler is Profile.DEFAULT,
     * which has the same behavior to Profile.ALL.
     *
     * @return a current profiler.
     */
    public Profile getProfile();

    Changes a profiler to a given one.
Params: profile – a new profiler to be set./**
     * Changes a profiler to a given one.
     * 
     * @param profile a new profiler to be set.
     */
    public void setProfile(Profile profile);

    Returns a LoadServiceCreator currently used.
Returns: a current LoadServiceCreator./**
     * Returns a LoadServiceCreator currently used.
     *
     * @return a current LoadServiceCreator.
     */
    public LoadServiceCreator getLoadServiceCreator();

    Changes a LoadServiceCreator to a given one.
Params: creator – a new LoadServiceCreator/**
     * Changes a LoadServiceCreator to a given one.
     *
     * @param creator a new LoadServiceCreator
     */
    public void setLoadServiceCreator(LoadServiceCreator creator);

    Returns an arguments' list.
Returns: an arguments' list./**
     * Returns an arguments' list.
     *
     * @return an arguments' list.
     */
    public String[] getArgv();

    Changes values of the arguments' list.
Params: argv – a new arguments' list./**
     * Changes values of the arguments' list.
     *
     * @param argv a new arguments' list.
     */
    public void setArgv(String[] argv);

    Returns a script filename to run. The default value is null.
Returns: a script filename./**
     * Returns a script filename to run. The default value is null.
     *
     * @return a script filename.
     */
    public String getScriptFilename();

    Changes a script filename to run. The default value is null.
Params: filename – a new script filename./**
     * Changes a script filename to run. The default value is null.
     *
     * @param filename a new script filename.
     */
    public void setScriptFilename(String filename);

    /**
     * Tests whether JRuby/Ruby version will be shown or not. The default value is
     * false.
     *
     * @return true if the version will be shown, false otherwise.
     */
    //Embedding API has a method to show version. Users should call the method
    //when they want to show version.
    //public boolean isShowVersion();

    /**
     * Changes a value whether JRuby/Ruby version will be shown or not. The default
     * value is false.
     *
     * @param show a new value to determine whether JRuby/Ruby version will be shown or not.
     */
    //public void setShowVersion(boolean show);
    
    /**
     * Tests whether generated Java bytecodes will be dumped out to System.out or not.
     * The default value is false.
     * 
     * @return true if generated Java bytecodes are shown, false otherwise.
     */
    //public boolean isShowBytecode();

    /**
     * Changes a value to show generated Java bytecodes or not. The default value is false.
     *
     * @param show true if generated Java bytecodes will be shown, false otherwise.
     */
    //public void setShowBytecode(boolean show);

    Returns a record separator. The default value is \u0000.
Returns: a record separator./**
     * Returns a record separator. The default value is \u0000.
     *
     * @return a record separator.
     */
    public String getRecordSeparator();

    Changes a record separator to a given value. If "0" is given, the record
separator goes to "\n\n", "777" goes to "\uFFFF", otherwise, an octal value
of the given number.
Params: separator – a new record separator value, "0" or "777"/**
     * Changes a record separator to a given value. If "0" is given, the record
     * separator goes to "\n\n", "777" goes to "\uFFFF", otherwise, an octal value
     * of the given number.
     *
     * @param separator a new record separator value, "0" or "777"
     */
    public void setRecordSeparator(String separator);

    Returns a value of KCode currently used. The default value is KCode.NONE.
Returns: a KCode value./**
     * Returns a value of KCode currently used. The default value is KCode.NONE.
     *
     * @return a KCode value.
     */
    public KCode getKCode();

    Changes a value of KCode to a given value. The default value is KCode.NONE.
Params: kcode – a new KCode value./**
     * Changes a value of KCode to a given value. The default value is KCode.NONE.
     *
     * @param kcode a new KCode value.
     */
    public void setKCode(KCode kcode);

    Returns the value of n, which means that jitted methods are logged in
every n methods. The default value is 0.
Returns: a value that determines how often jitted methods are logged./**
     * Returns the value of n, which means that jitted methods are logged in
     * every n methods. The default value is 0.
     *
     * @return a value that determines how often jitted methods are logged.
     */
    public int getJitLogEvery();

    Changes a value of n, so that jitted methods are logged in every n methods.
The default value is 0. This value can be set by the jruby.jit.logEvery System
property.
Params: logEvery – a new number of methods./**
     * Changes a value of n, so that jitted methods are logged in every n methods.
     * The default value is 0. This value can be set by the jruby.jit.logEvery System
     * property.
     * 
     * @param logEvery a new number of methods.
     */
    public void setJitLogEvery(int logEvery);

    Returns a value of the threshold that determines whether jitted methods'
call reached to the limit or not. The default value is -1 when security
restriction is applied, or 50 when no security restriction exists.
Returns: a value of the threshold./**
     * Returns a value of the threshold that determines whether jitted methods'
     * call reached to the limit or not. The default value is -1 when security
     * restriction is applied, or 50 when no security restriction exists.
     *
     * @return a value of the threshold.
     */
    public int getJitThreshold();

    Changes a value of the threshold that determines whether jitted methods'
call reached to the limit or not. The default value is -1 when security
restriction is applied, or 50 when no security restriction exists. This
value can be set by jruby.jit.threshold System property.
Params: threshold – a new value of the threshold./**
     * Changes a value of the threshold that determines whether jitted methods'
     * call reached to the limit or not. The default value is -1 when security
     * restriction is applied, or 50 when no security restriction exists. This
     * value can be set by jruby.jit.threshold System property.
     * 
     * @param threshold a new value of the threshold.
     */
    public void setJitThreshold(int threshold);

    Returns a value of a max class cache size. The default value is 0 when
security restriction is applied, or 4096 when no security restriction exists.
Returns: a value of a max class cache size./**
     * Returns a value of a max class cache size. The default value is 0 when
     * security restriction is applied, or 4096 when no security restriction exists.
     * 
     * @return a value of a max class cache size.
     */
    public int getJitMax();

    Changes a value of a max class cache size. The default value is 0 when
security restriction is applied, or 4096 when no security restriction exists.
This value can be set by jruby.jit.max System property.
Params: max – a new value of a max class cache size./**
     * Changes a value of a max class cache size. The default value is 0 when
     * security restriction is applied, or 4096 when no security restriction exists.
     * This value can be set by jruby.jit.max System property.
     * 
     * @param max a new value of a max class cache size.
     */
    public void setJitMax(int max);

    Returns a value of a max size of the bytecode generated by compiler. The
default value is -1 when security restriction is applied, or 10000 when
no security restriction exists.
Returns: a value of a max size of the bytecode./**
     * Returns a value of a max size of the bytecode generated by compiler. The
     * default value is -1 when security restriction is applied, or 10000 when
     * no security restriction exists.
     *
     * @return a value of a max size of the bytecode.
     */
    public int getJitMaxSize();

    Changes a value of a max size of the bytecode generated by compiler. The
default value is -1 when security restriction is applied, or 10000 when
no security restriction exists. This value can be set by jruby.jit.maxsize
System property.
Params: maxSize – a new value of a max size of the bytecode./**
     * Changes a value of a max size of the bytecode generated by compiler. The
     * default value is -1 when security restriction is applied, or 10000 when
     * no security restriction exists. This value can be set by jruby.jit.maxsize
     * System property.
     *
     * @param maxSize a new value of a max size of the bytecode.
     */
    public void setJitMaxSize(int maxSize);

    Returns version information about JRuby and Ruby supported by this platform.
Returns: version information./**
     * Returns version information about JRuby and Ruby supported by this platform.
     *
     * @return version information.
     */
    public String getSupportedRubyVersion();

    @Deprecated
    public org.jruby.CompatVersion getCompatVersion();

    @Deprecated
    public void setCompatVersion(org.jruby.CompatVersion version);
}
/

org.jruby/ jruby-core/ 9.2.14.0/ org/jruby/embed/EmbedRubyInstanceConfigAdapter.java
