/*
 * Copyright (c) 2012, 2016, Oracle and/or its affiliates. All rights reserved.
 * DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
 *
 * This code is free software; you can redistribute it and/or modify it
 * under the terms of the GNU General Public License version 2 only, as
 * published by the Free Software Foundation.  Oracle designates this
 * particular file as subject to the "Classpath" exception as provided
 * by Oracle in the LICENSE file that accompanied this code.
 *
 * This code is distributed in the hope that it will be useful, but WITHOUT
 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
 * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
 * version 2 for more details (a copy is included in the LICENSE file that
 * accompanied this code).
 *
 * You should have received a copy of the GNU General Public License version
 * 2 along with this work; if not, write to the Free Software Foundation,
 * Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.
 *
 * Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA
 * or visit www.oracle.com if you need additional information or have any
 * questions.
 */

/*
 * This file is available under and governed by the GNU General Public
 * License version 2 only, as published by the Free Software Foundation.
 * However, the following notice accompanied the original version of this
 * file:
 *
 * Copyright (c) 2007-2012, Stephen Colebourne & Michael Nascimento Santos
 *
 * All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions are met:
 *
 *  * Redistributions of source code must retain the above copyright notice,
 *    this list of conditions and the following disclaimer.
 *
 *  * Redistributions in binary form must reproduce the above copyright notice,
 *    this list of conditions and the following disclaimer in the documentation
 *    and/or other materials provided with the distribution.
 *
 *  * Neither the name of JSR-310 nor the names of its contributors
 *    may be used to endorse or promote products derived from this software
 *    without specific prior written permission.
 *
 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
 * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
 * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
 * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
 * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
 * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
 * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
 * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 */
package java.time;

import static java.time.LocalTime.MINUTES_PER_HOUR;
import static java.time.LocalTime.NANOS_PER_MILLI;
import static java.time.LocalTime.NANOS_PER_SECOND;
import static java.time.LocalTime.SECONDS_PER_DAY;
import static java.time.LocalTime.SECONDS_PER_HOUR;
import static java.time.LocalTime.SECONDS_PER_MINUTE;
import static java.time.temporal.ChronoField.NANO_OF_SECOND;
import static java.time.temporal.ChronoUnit.DAYS;
import static java.time.temporal.ChronoUnit.NANOS;
import static java.time.temporal.ChronoUnit.SECONDS;

import java.io.DataInput;
import java.io.DataOutput;
import java.io.IOException;
import java.io.InvalidObjectException;
import java.io.ObjectInputStream;
import java.io.Serializable;
import java.math.BigDecimal;
import java.math.BigInteger;
import java.math.RoundingMode;
import java.time.format.DateTimeParseException;
import java.time.temporal.ChronoField;
import java.time.temporal.ChronoUnit;
import java.time.temporal.Temporal;
import java.time.temporal.TemporalAmount;
import java.time.temporal.TemporalUnit;
import java.time.temporal.UnsupportedTemporalTypeException;
import java.util.List;
import java.util.Objects;
import java.util.regex.Matcher;
import java.util.regex.Pattern;

A time-based amount of time, such as '34.5 seconds'.

This class models a quantity or amount of time in terms of seconds and nanoseconds. It can be accessed using other duration-based units, such as minutes and hours. In addition, the DAYS unit can be used and is treated as exactly equal to 24 hours, thus ignoring daylight savings effects. See Period for the date-based equivalent to this class.

A physical duration could be of infinite length. For practicality, the duration is stored with constraints similar to Instant. The duration uses nanosecond resolution with a maximum value of the seconds that can be held in a long. This is greater than the current estimated age of the universe.

The range of a duration requires the storage of a number larger than a long. To achieve this, the class stores a long representing seconds and an int representing nanosecond-of-second, which will always be between 0 and 999,999,999. The model is of a directed duration, meaning that the duration may be negative.

The duration is measured in "seconds", but these are not necessarily identical to the scientific "SI second" definition based on atomic clocks. This difference only impacts durations measured near a leap-second and should not affect most applications. See Instant for a discussion as to the meaning of the second and time-scales.

This is a value-based class; use of identity-sensitive operations (including reference equality (==), identity hash code, or synchronization) on instances of Duration may have unpredictable results and should be avoided. The equals method should be used for comparisons.

Implementation Requirements: This class is immutable and thread-safe.
Since:1.8
/** * A time-based amount of time, such as '34.5 seconds'. * <p> * This class models a quantity or amount of time in terms of seconds and nanoseconds. * It can be accessed using other duration-based units, such as minutes and hours. * In addition, the {@link ChronoUnit#DAYS DAYS} unit can be used and is treated as * exactly equal to 24 hours, thus ignoring daylight savings effects. * See {@link Period} for the date-based equivalent to this class. * <p> * A physical duration could be of infinite length. * For practicality, the duration is stored with constraints similar to {@link Instant}. * The duration uses nanosecond resolution with a maximum value of the seconds that can * be held in a {@code long}. This is greater than the current estimated age of the universe. * <p> * The range of a duration requires the storage of a number larger than a {@code long}. * To achieve this, the class stores a {@code long} representing seconds and an {@code int} * representing nanosecond-of-second, which will always be between 0 and 999,999,999. * The model is of a directed duration, meaning that the duration may be negative. * <p> * The duration is measured in "seconds", but these are not necessarily identical to * the scientific "SI second" definition based on atomic clocks. * This difference only impacts durations measured near a leap-second and should not affect * most applications. * See {@link Instant} for a discussion as to the meaning of the second and time-scales. * * <p> * This is a <a href="{@docRoot}/java/lang/doc-files/ValueBased.html">value-based</a> * class; use of identity-sensitive operations (including reference equality * ({@code ==}), identity hash code, or synchronization) on instances of * {@code Duration} may have unpredictable results and should be avoided. * The {@code equals} method should be used for comparisons. * * @implSpec * This class is immutable and thread-safe. * * @since 1.8 */
public final class Duration implements TemporalAmount, Comparable<Duration>, Serializable {
Constant for a duration of zero.
/** * Constant for a duration of zero. */
public static final Duration ZERO = new Duration(0, 0);
Serialization version.
/** * Serialization version. */
private static final long serialVersionUID = 3078945930695997490L;
Constant for nanos per second.
/** * Constant for nanos per second. */
private static final BigInteger BI_NANOS_PER_SECOND = BigInteger.valueOf(NANOS_PER_SECOND);
The pattern for parsing.
/** * The pattern for parsing. */
private static class Lazy { static final Pattern PATTERN = Pattern.compile("([-+]?)P(?:([-+]?[0-9]+)D)?" + "(T(?:([-+]?[0-9]+)H)?(?:([-+]?[0-9]+)M)?(?:([-+]?[0-9]+)(?:[.,]([0-9]{0,9}))?S)?)?", Pattern.CASE_INSENSITIVE); }
The number of seconds in the duration.
/** * The number of seconds in the duration. */
private final long seconds;
The number of nanoseconds in the duration, expressed as a fraction of the number of seconds. This is always positive, and never exceeds 999,999,999.
/** * The number of nanoseconds in the duration, expressed as a fraction of the * number of seconds. This is always positive, and never exceeds 999,999,999. */
private final int nanos; //-----------------------------------------------------------------------
Obtains a Duration representing a number of standard 24 hour days.

The seconds are calculated based on the standard definition of a day, where each day is 86400 seconds which implies a 24 hour day. The nanosecond in second field is set to zero.

Params:
  • days – the number of days, positive or negative
Throws:
Returns:a Duration, not null
/** * Obtains a {@code Duration} representing a number of standard 24 hour days. * <p> * The seconds are calculated based on the standard definition of a day, * where each day is 86400 seconds which implies a 24 hour day. * The nanosecond in second field is set to zero. * * @param days the number of days, positive or negative * @return a {@code Duration}, not null * @throws ArithmeticException if the input days exceeds the capacity of {@code Duration} */
public static Duration ofDays(long days) { return create(Math.multiplyExact(days, SECONDS_PER_DAY), 0); }
Obtains a Duration representing a number of standard hours.

The seconds are calculated based on the standard definition of an hour, where each hour is 3600 seconds. The nanosecond in second field is set to zero.

Params:
  • hours – the number of hours, positive or negative
Throws:
Returns:a Duration, not null
/** * Obtains a {@code Duration} representing a number of standard hours. * <p> * The seconds are calculated based on the standard definition of an hour, * where each hour is 3600 seconds. * The nanosecond in second field is set to zero. * * @param hours the number of hours, positive or negative * @return a {@code Duration}, not null * @throws ArithmeticException if the input hours exceeds the capacity of {@code Duration} */
public static Duration ofHours(long hours) { return create(Math.multiplyExact(hours, SECONDS_PER_HOUR), 0); }
Obtains a Duration representing a number of standard minutes.

The seconds are calculated based on the standard definition of a minute, where each minute is 60 seconds. The nanosecond in second field is set to zero.

Params:
  • minutes – the number of minutes, positive or negative
Throws:
Returns:a Duration, not null
/** * Obtains a {@code Duration} representing a number of standard minutes. * <p> * The seconds are calculated based on the standard definition of a minute, * where each minute is 60 seconds. * The nanosecond in second field is set to zero. * * @param minutes the number of minutes, positive or negative * @return a {@code Duration}, not null * @throws ArithmeticException if the input minutes exceeds the capacity of {@code Duration} */
public static Duration ofMinutes(long minutes) { return create(Math.multiplyExact(minutes, SECONDS_PER_MINUTE), 0); } //-----------------------------------------------------------------------
Obtains a Duration representing a number of seconds.

The nanosecond in second field is set to zero.

Params:
  • seconds – the number of seconds, positive or negative
Returns:a Duration, not null
/** * Obtains a {@code Duration} representing a number of seconds. * <p> * The nanosecond in second field is set to zero. * * @param seconds the number of seconds, positive or negative * @return a {@code Duration}, not null */
public static Duration ofSeconds(long seconds) { return create(seconds, 0); }
Obtains a Duration representing a number of seconds and an adjustment in nanoseconds.

This method allows an arbitrary number of nanoseconds to be passed in. The factory will alter the values of the second and nanosecond in order to ensure that the stored nanosecond is in the range 0 to 999,999,999. For example, the following will result in the exactly the same duration:

 Duration.ofSeconds(3, 1);
 Duration.ofSeconds(4, -999_999_999);
 Duration.ofSeconds(2, 1000_000_001);
Params:
  • seconds – the number of seconds, positive or negative
  • nanoAdjustment – the nanosecond adjustment to the number of seconds, positive or negative
Throws:
  • ArithmeticException – if the adjustment causes the seconds to exceed the capacity of Duration
Returns:a Duration, not null
/** * Obtains a {@code Duration} representing a number of seconds and an * adjustment in nanoseconds. * <p> * This method allows an arbitrary number of nanoseconds to be passed in. * The factory will alter the values of the second and nanosecond in order * to ensure that the stored nanosecond is in the range 0 to 999,999,999. * For example, the following will result in the exactly the same duration: * <pre> * Duration.ofSeconds(3, 1); * Duration.ofSeconds(4, -999_999_999); * Duration.ofSeconds(2, 1000_000_001); * </pre> * * @param seconds the number of seconds, positive or negative * @param nanoAdjustment the nanosecond adjustment to the number of seconds, positive or negative * @return a {@code Duration}, not null * @throws ArithmeticException if the adjustment causes the seconds to exceed the capacity of {@code Duration} */
public static Duration ofSeconds(long seconds, long nanoAdjustment) { long secs = Math.addExact(seconds, Math.floorDiv(nanoAdjustment, NANOS_PER_SECOND)); int nos = (int) Math.floorMod(nanoAdjustment, NANOS_PER_SECOND); return create(secs, nos); } //-----------------------------------------------------------------------
Obtains a Duration representing a number of milliseconds.

The seconds and nanoseconds are extracted from the specified milliseconds.

Params:
  • millis – the number of milliseconds, positive or negative
Returns:a Duration, not null
/** * Obtains a {@code Duration} representing a number of milliseconds. * <p> * The seconds and nanoseconds are extracted from the specified milliseconds. * * @param millis the number of milliseconds, positive or negative * @return a {@code Duration}, not null */
public static Duration ofMillis(long millis) { long secs = millis / 1000; int mos = (int) (millis % 1000); if (mos < 0) { mos += 1000; secs--; } return create(secs, mos * 1000_000); } //-----------------------------------------------------------------------
Obtains a Duration representing a number of nanoseconds.

The seconds and nanoseconds are extracted from the specified nanoseconds.

Params:
  • nanos – the number of nanoseconds, positive or negative
Returns:a Duration, not null
/** * Obtains a {@code Duration} representing a number of nanoseconds. * <p> * The seconds and nanoseconds are extracted from the specified nanoseconds. * * @param nanos the number of nanoseconds, positive or negative * @return a {@code Duration}, not null */
public static Duration ofNanos(long nanos) { long secs = nanos / NANOS_PER_SECOND; int nos = (int) (nanos % NANOS_PER_SECOND); if (nos < 0) { nos += NANOS_PER_SECOND; secs--; } return create(secs, nos); } //-----------------------------------------------------------------------
Obtains a Duration representing an amount in the specified unit.

The parameters represent the two parts of a phrase like '6 Hours'. For example:

 Duration.of(3, SECONDS);
 Duration.of(465, HOURS);
Only a subset of units are accepted by this method. The unit must either have an exact duration or be ChronoUnit.DAYS which is treated as 24 hours. Other units throw an exception.
Params:
  • amount – the amount of the duration, measured in terms of the unit, positive or negative
  • unit – the unit that the duration is measured in, must have an exact duration, not null
Throws:
Returns:a Duration, not null
/** * Obtains a {@code Duration} representing an amount in the specified unit. * <p> * The parameters represent the two parts of a phrase like '6 Hours'. For example: * <pre> * Duration.of(3, SECONDS); * Duration.of(465, HOURS); * </pre> * Only a subset of units are accepted by this method. * The unit must either have an {@linkplain TemporalUnit#isDurationEstimated() exact duration} or * be {@link ChronoUnit#DAYS} which is treated as 24 hours. Other units throw an exception. * * @param amount the amount of the duration, measured in terms of the unit, positive or negative * @param unit the unit that the duration is measured in, must have an exact duration, not null * @return a {@code Duration}, not null * @throws DateTimeException if the period unit has an estimated duration * @throws ArithmeticException if a numeric overflow occurs */
public static Duration of(long amount, TemporalUnit unit) { return ZERO.plus(amount, unit); } //-----------------------------------------------------------------------
Obtains an instance of Duration from a temporal amount.

This obtains a duration based on the specified amount. A TemporalAmount represents an amount of time, which may be date-based or time-based, which this factory extracts to a duration.

The conversion loops around the set of units from the amount and uses the duration of the unit to calculate the total Duration. Only a subset of units are accepted by this method. The unit must either have an exact duration or be ChronoUnit.DAYS which is treated as 24 hours. If any other units are found then an exception is thrown.

Params:
  • amount – the temporal amount to convert, not null
Throws:
Returns:the equivalent duration, not null
/** * Obtains an instance of {@code Duration} from a temporal amount. * <p> * This obtains a duration based on the specified amount. * A {@code TemporalAmount} represents an amount of time, which may be * date-based or time-based, which this factory extracts to a duration. * <p> * The conversion loops around the set of units from the amount and uses * the {@linkplain TemporalUnit#getDuration() duration} of the unit to * calculate the total {@code Duration}. * Only a subset of units are accepted by this method. The unit must either * have an {@linkplain TemporalUnit#isDurationEstimated() exact duration} * or be {@link ChronoUnit#DAYS} which is treated as 24 hours. * If any other units are found then an exception is thrown. * * @param amount the temporal amount to convert, not null * @return the equivalent duration, not null * @throws DateTimeException if unable to convert to a {@code Duration} * @throws ArithmeticException if numeric overflow occurs */
public static Duration from(TemporalAmount amount) { Objects.requireNonNull(amount, "amount"); Duration duration = ZERO; for (TemporalUnit unit : amount.getUnits()) { duration = duration.plus(amount.get(unit), unit); } return duration; } //-----------------------------------------------------------------------
Obtains a Duration from a text string such as PnDTnHnMn.nS.

This will parse a textual representation of a duration, including the string produced by toString(). The formats accepted are based on the ISO-8601 duration format PnDTnHnMn.nS with days considered to be exactly 24 hours.

The string starts with an optional sign, denoted by the ASCII negative or positive symbol. If negative, the whole period is negated. The ASCII letter "P" is next in upper or lower case. There are then four sections, each consisting of a number and a suffix. The sections have suffixes in ASCII of "D", "H", "M" and "S" for days, hours, minutes and seconds, accepted in upper or lower case. The suffixes must occur in order. The ASCII letter "T" must occur before the first occurrence, if any, of an hour, minute or second section. At least one of the four sections must be present, and if "T" is present there must be at least one section after the "T". The number part of each section must consist of one or more ASCII digits. The number may be prefixed by the ASCII negative or positive symbol. The number of days, hours and minutes must parse to a long. The number of seconds must parse to a long with optional fraction. The decimal point may be either a dot or a comma. The fractional part may have from zero to 9 digits.

The leading plus/minus sign, and negative values for other units are not part of the ISO-8601 standard.

Examples:

   "PT20.345S" -- parses as "20.345 seconds"
   "PT15M"     -- parses as "15 minutes" (where a minute is 60 seconds)
   "PT10H"     -- parses as "10 hours" (where an hour is 3600 seconds)
   "P2D"       -- parses as "2 days" (where a day is 24 hours or 86400 seconds)
   "P2DT3H4M"  -- parses as "2 days, 3 hours and 4 minutes"
   "PT-6H3M"    -- parses as "-6 hours and +3 minutes"
   "-PT6H3M"    -- parses as "-6 hours and -3 minutes"
   "-PT-6H+3M"  -- parses as "+6 hours and -3 minutes"
Params:
  • text – the text to parse, not null
Throws:
Returns:the parsed duration, not null
/** * Obtains a {@code Duration} from a text string such as {@code PnDTnHnMn.nS}. * <p> * This will parse a textual representation of a duration, including the * string produced by {@code toString()}. The formats accepted are based * on the ISO-8601 duration format {@code PnDTnHnMn.nS} with days * considered to be exactly 24 hours. * <p> * The string starts with an optional sign, denoted by the ASCII negative * or positive symbol. If negative, the whole period is negated. * The ASCII letter "P" is next in upper or lower case. * There are then four sections, each consisting of a number and a suffix. * The sections have suffixes in ASCII of "D", "H", "M" and "S" for * days, hours, minutes and seconds, accepted in upper or lower case. * The suffixes must occur in order. The ASCII letter "T" must occur before * the first occurrence, if any, of an hour, minute or second section. * At least one of the four sections must be present, and if "T" is present * there must be at least one section after the "T". * The number part of each section must consist of one or more ASCII digits. * The number may be prefixed by the ASCII negative or positive symbol. * The number of days, hours and minutes must parse to a {@code long}. * The number of seconds must parse to a {@code long} with optional fraction. * The decimal point may be either a dot or a comma. * The fractional part may have from zero to 9 digits. * <p> * The leading plus/minus sign, and negative values for other units are * not part of the ISO-8601 standard. * <p> * Examples: * <pre> * "PT20.345S" -- parses as "20.345 seconds" * "PT15M" -- parses as "15 minutes" (where a minute is 60 seconds) * "PT10H" -- parses as "10 hours" (where an hour is 3600 seconds) * "P2D" -- parses as "2 days" (where a day is 24 hours or 86400 seconds) * "P2DT3H4M" -- parses as "2 days, 3 hours and 4 minutes" * "PT-6H3M" -- parses as "-6 hours and +3 minutes" * "-PT6H3M" -- parses as "-6 hours and -3 minutes" * "-PT-6H+3M" -- parses as "+6 hours and -3 minutes" * </pre> * * @param text the text to parse, not null * @return the parsed duration, not null * @throws DateTimeParseException if the text cannot be parsed to a duration */
public static Duration parse(CharSequence text) { Objects.requireNonNull(text, "text"); Matcher matcher = Lazy.PATTERN.matcher(text); if (matcher.matches()) { // check for letter T but no time sections if (!charMatch(text, matcher.start(3), matcher.end(3), 'T')) { boolean negate = charMatch(text, matcher.start(1), matcher.end(1), '-'); int dayStart = matcher.start(2), dayEnd = matcher.end(2); int hourStart = matcher.start(4), hourEnd = matcher.end(4); int minuteStart = matcher.start(5), minuteEnd = matcher.end(5); int secondStart = matcher.start(6), secondEnd = matcher.end(6); int fractionStart = matcher.start(7), fractionEnd = matcher.end(7); if (dayStart >= 0 || hourStart >= 0 || minuteStart >= 0 || secondStart >= 0) { long daysAsSecs = parseNumber(text, dayStart, dayEnd, SECONDS_PER_DAY, "days"); long hoursAsSecs = parseNumber(text, hourStart, hourEnd, SECONDS_PER_HOUR, "hours"); long minsAsSecs = parseNumber(text, minuteStart, minuteEnd, SECONDS_PER_MINUTE, "minutes"); long seconds = parseNumber(text, secondStart, secondEnd, 1, "seconds"); boolean negativeSecs = secondStart >= 0 && text.charAt(secondStart) == '-'; int nanos = parseFraction(text, fractionStart, fractionEnd, negativeSecs ? -1 : 1); try { return create(negate, daysAsSecs, hoursAsSecs, minsAsSecs, seconds, nanos); } catch (ArithmeticException ex) { throw (DateTimeParseException) new DateTimeParseException("Text cannot be parsed to a Duration: overflow", text, 0).initCause(ex); } } } } throw new DateTimeParseException("Text cannot be parsed to a Duration", text, 0); } private static boolean charMatch(CharSequence text, int start, int end, char c) { return (start >= 0 && end == start + 1 && text.charAt(start) == c); } private static long parseNumber(CharSequence text, int start, int end, int multiplier, String errorText) { // regex limits to [-+]?[0-9]+ if (start < 0 || end < 0) { return 0; } try { long val = Long.parseLong(text, start, end, 10); return Math.multiplyExact(val, multiplier); } catch (NumberFormatException | ArithmeticException ex) { throw (DateTimeParseException) new DateTimeParseException("Text cannot be parsed to a Duration: " + errorText, text, 0).initCause(ex); } } private static int parseFraction(CharSequence text, int start, int end, int negate) { // regex limits to [0-9]{0,9} if (start < 0 || end < 0 || end - start == 0) { return 0; } try { int fraction = Integer.parseInt(text, start, end, 10); // for number strings smaller than 9 digits, interpret as if there // were trailing zeros for (int i = end - start; i < 9; i++) { fraction *= 10; } return fraction * negate; } catch (NumberFormatException | ArithmeticException ex) { throw (DateTimeParseException) new DateTimeParseException("Text cannot be parsed to a Duration: fraction", text, 0).initCause(ex); } } private static Duration create(boolean negate, long daysAsSecs, long hoursAsSecs, long minsAsSecs, long secs, int nanos) { long seconds = Math.addExact(daysAsSecs, Math.addExact(hoursAsSecs, Math.addExact(minsAsSecs, secs))); if (negate) { return ofSeconds(seconds, nanos).negated(); } return ofSeconds(seconds, nanos); } //-----------------------------------------------------------------------
Obtains a Duration representing the duration between two temporal objects.

This calculates the duration between two temporal objects. If the objects are of different types, then the duration is calculated based on the type of the first object. For example, if the first argument is a LocalTime then the second argument is converted to a LocalTime.

The specified temporal objects must support the SECONDS unit. For full accuracy, either the NANOS unit or the NANO_OF_SECOND field should be supported.

The result of this method can be a negative period if the end is before the start. To guarantee to obtain a positive duration call abs() on the result.

Params:
  • startInclusive – the start instant, inclusive, not null
  • endExclusive – the end instant, exclusive, not null
Throws:
Returns:a Duration, not null
/** * Obtains a {@code Duration} representing the duration between two temporal objects. * <p> * This calculates the duration between two temporal objects. If the objects * are of different types, then the duration is calculated based on the type * of the first object. For example, if the first argument is a {@code LocalTime} * then the second argument is converted to a {@code LocalTime}. * <p> * The specified temporal objects must support the {@link ChronoUnit#SECONDS SECONDS} unit. * For full accuracy, either the {@link ChronoUnit#NANOS NANOS} unit or the * {@link ChronoField#NANO_OF_SECOND NANO_OF_SECOND} field should be supported. * <p> * The result of this method can be a negative period if the end is before the start. * To guarantee to obtain a positive duration call {@link #abs()} on the result. * * @param startInclusive the start instant, inclusive, not null * @param endExclusive the end instant, exclusive, not null * @return a {@code Duration}, not null * @throws DateTimeException if the seconds between the temporals cannot be obtained * @throws ArithmeticException if the calculation exceeds the capacity of {@code Duration} */
public static Duration between(Temporal startInclusive, Temporal endExclusive) { try { return ofNanos(startInclusive.until(endExclusive, NANOS)); } catch (DateTimeException | ArithmeticException ex) { long secs = startInclusive.until(endExclusive, SECONDS); long nanos; try { nanos = endExclusive.getLong(NANO_OF_SECOND) - startInclusive.getLong(NANO_OF_SECOND); if (secs > 0 && nanos < 0) { secs++; } else if (secs < 0 && nanos > 0) { secs--; } } catch (DateTimeException ex2) { nanos = 0; } return ofSeconds(secs, nanos); } } //-----------------------------------------------------------------------
Obtains an instance of Duration using seconds and nanoseconds.
Params:
  • seconds – the length of the duration in seconds, positive or negative
  • nanoAdjustment – the nanosecond adjustment within the second, from 0 to 999,999,999
/** * Obtains an instance of {@code Duration} using seconds and nanoseconds. * * @param seconds the length of the duration in seconds, positive or negative * @param nanoAdjustment the nanosecond adjustment within the second, from 0 to 999,999,999 */
private static Duration create(long seconds, int nanoAdjustment) { if ((seconds | nanoAdjustment) == 0) { return ZERO; } return new Duration(seconds, nanoAdjustment); }
Constructs an instance of Duration using seconds and nanoseconds.
Params:
  • seconds – the length of the duration in seconds, positive or negative
  • nanos – the nanoseconds within the second, from 0 to 999,999,999
/** * Constructs an instance of {@code Duration} using seconds and nanoseconds. * * @param seconds the length of the duration in seconds, positive or negative * @param nanos the nanoseconds within the second, from 0 to 999,999,999 */
private Duration(long seconds, int nanos) { super(); this.seconds = seconds; this.nanos = nanos; } //-----------------------------------------------------------------------
Gets the value of the requested unit.

This returns a value for each of the two supported units, SECONDS and NANOS. All other units throw an exception.

Params:
  • unit – the TemporalUnit for which to return the value
Throws:
Returns:the long value of the unit
/** * Gets the value of the requested unit. * <p> * This returns a value for each of the two supported units, * {@link ChronoUnit#SECONDS SECONDS} and {@link ChronoUnit#NANOS NANOS}. * All other units throw an exception. * * @param unit the {@code TemporalUnit} for which to return the value * @return the long value of the unit * @throws DateTimeException if the unit is not supported * @throws UnsupportedTemporalTypeException if the unit is not supported */
@Override public long get(TemporalUnit unit) { if (unit == SECONDS) { return seconds; } else if (unit == NANOS) { return nanos; } else { throw new UnsupportedTemporalTypeException("Unsupported unit: " + unit); } }
Gets the set of units supported by this duration.

The supported units are SECONDS, and NANOS. They are returned in the order seconds, nanos.

This set can be used in conjunction with get(TemporalUnit) to access the entire state of the duration.

Returns:a list containing the seconds and nanos units, not null
/** * Gets the set of units supported by this duration. * <p> * The supported units are {@link ChronoUnit#SECONDS SECONDS}, * and {@link ChronoUnit#NANOS NANOS}. * They are returned in the order seconds, nanos. * <p> * This set can be used in conjunction with {@link #get(TemporalUnit)} * to access the entire state of the duration. * * @return a list containing the seconds and nanos units, not null */
@Override public List<TemporalUnit> getUnits() { return DurationUnits.UNITS; }
Private class to delay initialization of this list until needed. The circular dependency between Duration and ChronoUnit prevents the simple initialization in Duration.
/** * Private class to delay initialization of this list until needed. * The circular dependency between Duration and ChronoUnit prevents * the simple initialization in Duration. */
private static class DurationUnits { static final List<TemporalUnit> UNITS = List.of(SECONDS, NANOS); } //-----------------------------------------------------------------------
Checks if this duration is zero length.

A Duration represents a directed distance between two points on the time-line and can therefore be positive, zero or negative. This method checks whether the length is zero.

Returns:true if this duration has a total length equal to zero
/** * Checks if this duration is zero length. * <p> * A {@code Duration} represents a directed distance between two points on * the time-line and can therefore be positive, zero or negative. * This method checks whether the length is zero. * * @return true if this duration has a total length equal to zero */
public boolean isZero() { return (seconds | nanos) == 0; }
Checks if this duration is negative, excluding zero.

A Duration represents a directed distance between two points on the time-line and can therefore be positive, zero or negative. This method checks whether the length is less than zero.

Returns:true if this duration has a total length less than zero
/** * Checks if this duration is negative, excluding zero. * <p> * A {@code Duration} represents a directed distance between two points on * the time-line and can therefore be positive, zero or negative. * This method checks whether the length is less than zero. * * @return true if this duration has a total length less than zero */
public boolean isNegative() { return seconds < 0; } //-----------------------------------------------------------------------
Gets the number of seconds in this duration.

The length of the duration is stored using two fields - seconds and nanoseconds. The nanoseconds part is a value from 0 to 999,999,999 that is an adjustment to the length in seconds. The total duration is defined by calling this method and getNano().

A Duration represents a directed distance between two points on the time-line. A negative duration is expressed by the negative sign of the seconds part. A duration of -1 nanosecond is stored as -1 seconds plus 999,999,999 nanoseconds.

Returns:the whole seconds part of the length of the duration, positive or negative
/** * Gets the number of seconds in this duration. * <p> * The length of the duration is stored using two fields - seconds and nanoseconds. * The nanoseconds part is a value from 0 to 999,999,999 that is an adjustment to * the length in seconds. * The total duration is defined by calling this method and {@link #getNano()}. * <p> * A {@code Duration} represents a directed distance between two points on the time-line. * A negative duration is expressed by the negative sign of the seconds part. * A duration of -1 nanosecond is stored as -1 seconds plus 999,999,999 nanoseconds. * * @return the whole seconds part of the length of the duration, positive or negative */
public long getSeconds() { return seconds; }
Gets the number of nanoseconds within the second in this duration.

The length of the duration is stored using two fields - seconds and nanoseconds. The nanoseconds part is a value from 0 to 999,999,999 that is an adjustment to the length in seconds. The total duration is defined by calling this method and getSeconds().

A Duration represents a directed distance between two points on the time-line. A negative duration is expressed by the negative sign of the seconds part. A duration of -1 nanosecond is stored as -1 seconds plus 999,999,999 nanoseconds.

Returns:the nanoseconds within the second part of the length of the duration, from 0 to 999,999,999
/** * Gets the number of nanoseconds within the second in this duration. * <p> * The length of the duration is stored using two fields - seconds and nanoseconds. * The nanoseconds part is a value from 0 to 999,999,999 that is an adjustment to * the length in seconds. * The total duration is defined by calling this method and {@link #getSeconds()}. * <p> * A {@code Duration} represents a directed distance between two points on the time-line. * A negative duration is expressed by the negative sign of the seconds part. * A duration of -1 nanosecond is stored as -1 seconds plus 999,999,999 nanoseconds. * * @return the nanoseconds within the second part of the length of the duration, from 0 to 999,999,999 */
public int getNano() { return nanos; } //-----------------------------------------------------------------------
Returns a copy of this duration with the specified amount of seconds.

This returns a duration with the specified seconds, retaining the nano-of-second part of this duration.

This instance is immutable and unaffected by this method call.

Params:
  • seconds – the seconds to represent, may be negative
Returns:a Duration based on this period with the requested seconds, not null
/** * Returns a copy of this duration with the specified amount of seconds. * <p> * This returns a duration with the specified seconds, retaining the * nano-of-second part of this duration. * <p> * This instance is immutable and unaffected by this method call. * * @param seconds the seconds to represent, may be negative * @return a {@code Duration} based on this period with the requested seconds, not null */
public Duration withSeconds(long seconds) { return create(seconds, nanos); }
Returns a copy of this duration with the specified nano-of-second.

This returns a duration with the specified nano-of-second, retaining the seconds part of this duration.

This instance is immutable and unaffected by this method call.

Params:
  • nanoOfSecond – the nano-of-second to represent, from 0 to 999,999,999
Throws:
Returns:a Duration based on this period with the requested nano-of-second, not null
/** * Returns a copy of this duration with the specified nano-of-second. * <p> * This returns a duration with the specified nano-of-second, retaining the * seconds part of this duration. * <p> * This instance is immutable and unaffected by this method call. * * @param nanoOfSecond the nano-of-second to represent, from 0 to 999,999,999 * @return a {@code Duration} based on this period with the requested nano-of-second, not null * @throws DateTimeException if the nano-of-second is invalid */
public Duration withNanos(int nanoOfSecond) { NANO_OF_SECOND.checkValidIntValue(nanoOfSecond); return create(seconds, nanoOfSecond); } //-----------------------------------------------------------------------
Returns a copy of this duration with the specified duration added.

This instance is immutable and unaffected by this method call.

Params:
  • duration – the duration to add, positive or negative, not null
Throws:
Returns:a Duration based on this duration with the specified duration added, not null
/** * Returns a copy of this duration with the specified duration added. * <p> * This instance is immutable and unaffected by this method call. * * @param duration the duration to add, positive or negative, not null * @return a {@code Duration} based on this duration with the specified duration added, not null * @throws ArithmeticException if numeric overflow occurs */
public Duration plus(Duration duration) { return plus(duration.getSeconds(), duration.getNano()); }
Returns a copy of this duration with the specified duration added.

The duration amount is measured in terms of the specified unit. Only a subset of units are accepted by this method. The unit must either have an exact duration or be ChronoUnit.DAYS which is treated as 24 hours. Other units throw an exception.

This instance is immutable and unaffected by this method call.

Params:
  • amountToAdd – the amount to add, measured in terms of the unit, positive or negative
  • unit – the unit that the amount is measured in, must have an exact duration, not null
Throws:
Returns:a Duration based on this duration with the specified duration added, not null
/** * Returns a copy of this duration with the specified duration added. * <p> * The duration amount is measured in terms of the specified unit. * Only a subset of units are accepted by this method. * The unit must either have an {@linkplain TemporalUnit#isDurationEstimated() exact duration} or * be {@link ChronoUnit#DAYS} which is treated as 24 hours. Other units throw an exception. * <p> * This instance is immutable and unaffected by this method call. * * @param amountToAdd the amount to add, measured in terms of the unit, positive or negative * @param unit the unit that the amount is measured in, must have an exact duration, not null * @return a {@code Duration} based on this duration with the specified duration added, not null * @throws UnsupportedTemporalTypeException if the unit is not supported * @throws ArithmeticException if numeric overflow occurs */
public Duration plus(long amountToAdd, TemporalUnit unit) { Objects.requireNonNull(unit, "unit"); if (unit == DAYS) { return plus(Math.multiplyExact(amountToAdd, SECONDS_PER_DAY), 0); } if (unit.isDurationEstimated()) { throw new UnsupportedTemporalTypeException("Unit must not have an estimated duration"); } if (amountToAdd == 0) { return this; } if (unit instanceof ChronoUnit) { switch ((ChronoUnit) unit) { case NANOS: return plusNanos(amountToAdd); case MICROS: return plusSeconds((amountToAdd / (1000_000L * 1000)) * 1000).plusNanos((amountToAdd % (1000_000L * 1000)) * 1000); case MILLIS: return plusMillis(amountToAdd); case SECONDS: return plusSeconds(amountToAdd); } return plusSeconds(Math.multiplyExact(unit.getDuration().seconds, amountToAdd)); } Duration duration = unit.getDuration().multipliedBy(amountToAdd); return plusSeconds(duration.getSeconds()).plusNanos(duration.getNano()); } //-----------------------------------------------------------------------
Returns a copy of this duration with the specified duration in standard 24 hour days added.

The number of days is multiplied by 86400 to obtain the number of seconds to add. This is based on the standard definition of a day as 24 hours.

This instance is immutable and unaffected by this method call.

Params:
  • daysToAdd – the days to add, positive or negative
Throws:
Returns:a Duration based on this duration with the specified days added, not null
/** * Returns a copy of this duration with the specified duration in standard 24 hour days added. * <p> * The number of days is multiplied by 86400 to obtain the number of seconds to add. * This is based on the standard definition of a day as 24 hours. * <p> * This instance is immutable and unaffected by this method call. * * @param daysToAdd the days to add, positive or negative * @return a {@code Duration} based on this duration with the specified days added, not null * @throws ArithmeticException if numeric overflow occurs */
public Duration plusDays(long daysToAdd) { return plus(Math.multiplyExact(daysToAdd, SECONDS_PER_DAY), 0); }
Returns a copy of this duration with the specified duration in hours added.

This instance is immutable and unaffected by this method call.

Params:
  • hoursToAdd – the hours to add, positive or negative
Throws:
Returns:a Duration based on this duration with the specified hours added, not null
/** * Returns a copy of this duration with the specified duration in hours added. * <p> * This instance is immutable and unaffected by this method call. * * @param hoursToAdd the hours to add, positive or negative * @return a {@code Duration} based on this duration with the specified hours added, not null * @throws ArithmeticException if numeric overflow occurs */
public Duration plusHours(long hoursToAdd) { return plus(Math.multiplyExact(hoursToAdd, SECONDS_PER_HOUR), 0); }
Returns a copy of this duration with the specified duration in minutes added.

This instance is immutable and unaffected by this method call.

Params:
  • minutesToAdd – the minutes to add, positive or negative
Throws:
Returns:a Duration based on this duration with the specified minutes added, not null
/** * Returns a copy of this duration with the specified duration in minutes added. * <p> * This instance is immutable and unaffected by this method call. * * @param minutesToAdd the minutes to add, positive or negative * @return a {@code Duration} based on this duration with the specified minutes added, not null * @throws ArithmeticException if numeric overflow occurs */
public Duration plusMinutes(long minutesToAdd) { return plus(Math.multiplyExact(minutesToAdd, SECONDS_PER_MINUTE), 0); }
Returns a copy of this duration with the specified duration in seconds added.

This instance is immutable and unaffected by this method call.

Params:
  • secondsToAdd – the seconds to add, positive or negative
Throws:
Returns:a Duration based on this duration with the specified seconds added, not null
/** * Returns a copy of this duration with the specified duration in seconds added. * <p> * This instance is immutable and unaffected by this method call. * * @param secondsToAdd the seconds to add, positive or negative * @return a {@code Duration} based on this duration with the specified seconds added, not null * @throws ArithmeticException if numeric overflow occurs */
public Duration plusSeconds(long secondsToAdd) { return plus(secondsToAdd, 0); }
Returns a copy of this duration with the specified duration in milliseconds added.

This instance is immutable and unaffected by this method call.

Params:
  • millisToAdd – the milliseconds to add, positive or negative
Throws:
Returns:a Duration based on this duration with the specified milliseconds added, not null
/** * Returns a copy of this duration with the specified duration in milliseconds added. * <p> * This instance is immutable and unaffected by this method call. * * @param millisToAdd the milliseconds to add, positive or negative * @return a {@code Duration} based on this duration with the specified milliseconds added, not null * @throws ArithmeticException if numeric overflow occurs */
public Duration plusMillis(long millisToAdd) { return plus(millisToAdd / 1000, (millisToAdd % 1000) * 1000_000); }
Returns a copy of this duration with the specified duration in nanoseconds added.

This instance is immutable and unaffected by this method call.

Params:
  • nanosToAdd – the nanoseconds to add, positive or negative
Throws:
Returns:a Duration based on this duration with the specified nanoseconds added, not null
/** * Returns a copy of this duration with the specified duration in nanoseconds added. * <p> * This instance is immutable and unaffected by this method call. * * @param nanosToAdd the nanoseconds to add, positive or negative * @return a {@code Duration} based on this duration with the specified nanoseconds added, not null * @throws ArithmeticException if numeric overflow occurs */
public Duration plusNanos(long nanosToAdd) { return plus(0, nanosToAdd); }
Returns a copy of this duration with the specified duration added.

This instance is immutable and unaffected by this method call.

Params:
  • secondsToAdd – the seconds to add, positive or negative
  • nanosToAdd – the nanos to add, positive or negative
Throws:
Returns:a Duration based on this duration with the specified seconds added, not null
/** * Returns a copy of this duration with the specified duration added. * <p> * This instance is immutable and unaffected by this method call. * * @param secondsToAdd the seconds to add, positive or negative * @param nanosToAdd the nanos to add, positive or negative * @return a {@code Duration} based on this duration with the specified seconds added, not null * @throws ArithmeticException if numeric overflow occurs */
private Duration plus(long secondsToAdd, long nanosToAdd) { if ((secondsToAdd | nanosToAdd) == 0) { return this; } long epochSec = Math.addExact(seconds, secondsToAdd); epochSec = Math.addExact(epochSec, nanosToAdd / NANOS_PER_SECOND); nanosToAdd = nanosToAdd % NANOS_PER_SECOND; long nanoAdjustment = nanos + nanosToAdd; // safe int+NANOS_PER_SECOND return ofSeconds(epochSec, nanoAdjustment); } //-----------------------------------------------------------------------
Returns a copy of this duration with the specified duration subtracted.

This instance is immutable and unaffected by this method call.

Params:
  • duration – the duration to subtract, positive or negative, not null
Throws:
Returns:a Duration based on this duration with the specified duration subtracted, not null
/** * Returns a copy of this duration with the specified duration subtracted. * <p> * This instance is immutable and unaffected by this method call. * * @param duration the duration to subtract, positive or negative, not null * @return a {@code Duration} based on this duration with the specified duration subtracted, not null * @throws ArithmeticException if numeric overflow occurs */
public Duration minus(Duration duration) { long secsToSubtract = duration.getSeconds(); int nanosToSubtract = duration.getNano(); if (secsToSubtract == Long.MIN_VALUE) { return plus(Long.MAX_VALUE, -nanosToSubtract).plus(1, 0); } return plus(-secsToSubtract, -nanosToSubtract); }
Returns a copy of this duration with the specified duration subtracted.

The duration amount is measured in terms of the specified unit. Only a subset of units are accepted by this method. The unit must either have an exact duration or be ChronoUnit.DAYS which is treated as 24 hours. Other units throw an exception.

This instance is immutable and unaffected by this method call.

Params:
  • amountToSubtract – the amount to subtract, measured in terms of the unit, positive or negative
  • unit – the unit that the amount is measured in, must have an exact duration, not null
Throws:
Returns:a Duration based on this duration with the specified duration subtracted, not null
/** * Returns a copy of this duration with the specified duration subtracted. * <p> * The duration amount is measured in terms of the specified unit. * Only a subset of units are accepted by this method. * The unit must either have an {@linkplain TemporalUnit#isDurationEstimated() exact duration} or * be {@link ChronoUnit#DAYS} which is treated as 24 hours. Other units throw an exception. * <p> * This instance is immutable and unaffected by this method call. * * @param amountToSubtract the amount to subtract, measured in terms of the unit, positive or negative * @param unit the unit that the amount is measured in, must have an exact duration, not null * @return a {@code Duration} based on this duration with the specified duration subtracted, not null * @throws ArithmeticException if numeric overflow occurs */
public Duration minus(long amountToSubtract, TemporalUnit unit) { return (amountToSubtract == Long.MIN_VALUE ? plus(Long.MAX_VALUE, unit).plus(1, unit) : plus(-amountToSubtract, unit)); } //-----------------------------------------------------------------------
Returns a copy of this duration with the specified duration in standard 24 hour days subtracted.

The number of days is multiplied by 86400 to obtain the number of seconds to subtract. This is based on the standard definition of a day as 24 hours.

This instance is immutable and unaffected by this method call.

Params:
  • daysToSubtract – the days to subtract, positive or negative
Throws:
Returns:a Duration based on this duration with the specified days subtracted, not null
/** * Returns a copy of this duration with the specified duration in standard 24 hour days subtracted. * <p> * The number of days is multiplied by 86400 to obtain the number of seconds to subtract. * This is based on the standard definition of a day as 24 hours. * <p> * This instance is immutable and unaffected by this method call. * * @param daysToSubtract the days to subtract, positive or negative * @return a {@code Duration} based on this duration with the specified days subtracted, not null * @throws ArithmeticException if numeric overflow occurs */
public Duration minusDays(long daysToSubtract) { return (daysToSubtract == Long.MIN_VALUE ? plusDays(Long.MAX_VALUE).plusDays(1) : plusDays(-daysToSubtract)); }
Returns a copy of this duration with the specified duration in hours subtracted.

The number of hours is multiplied by 3600 to obtain the number of seconds to subtract.

This instance is immutable and unaffected by this method call.

Params:
  • hoursToSubtract – the hours to subtract, positive or negative
Throws:
Returns:a Duration based on this duration with the specified hours subtracted, not null
/** * Returns a copy of this duration with the specified duration in hours subtracted. * <p> * The number of hours is multiplied by 3600 to obtain the number of seconds to subtract. * <p> * This instance is immutable and unaffected by this method call. * * @param hoursToSubtract the hours to subtract, positive or negative * @return a {@code Duration} based on this duration with the specified hours subtracted, not null * @throws ArithmeticException if numeric overflow occurs */
public Duration minusHours(long hoursToSubtract) { return (hoursToSubtract == Long.MIN_VALUE ? plusHours(Long.MAX_VALUE).plusHours(1) : plusHours(-hoursToSubtract)); }
Returns a copy of this duration with the specified duration in minutes subtracted.

The number of hours is multiplied by 60 to obtain the number of seconds to subtract.

This instance is immutable and unaffected by this method call.

Params:
  • minutesToSubtract – the minutes to subtract, positive or negative
Throws:
Returns:a Duration based on this duration with the specified minutes subtracted, not null
/** * Returns a copy of this duration with the specified duration in minutes subtracted. * <p> * The number of hours is multiplied by 60 to obtain the number of seconds to subtract. * <p> * This instance is immutable and unaffected by this method call. * * @param minutesToSubtract the minutes to subtract, positive or negative * @return a {@code Duration} based on this duration with the specified minutes subtracted, not null * @throws ArithmeticException if numeric overflow occurs */
public Duration minusMinutes(long minutesToSubtract) { return (minutesToSubtract == Long.MIN_VALUE ? plusMinutes(Long.MAX_VALUE).plusMinutes(1) : plusMinutes(-minutesToSubtract)); }
Returns a copy of this duration with the specified duration in seconds subtracted.

This instance is immutable and unaffected by this method call.

Params:
  • secondsToSubtract – the seconds to subtract, positive or negative
Throws:
Returns:a Duration based on this duration with the specified seconds subtracted, not null
/** * Returns a copy of this duration with the specified duration in seconds subtracted. * <p> * This instance is immutable and unaffected by this method call. * * @param secondsToSubtract the seconds to subtract, positive or negative * @return a {@code Duration} based on this duration with the specified seconds subtracted, not null * @throws ArithmeticException if numeric overflow occurs */
public Duration minusSeconds(long secondsToSubtract) { return (secondsToSubtract == Long.MIN_VALUE ? plusSeconds(Long.MAX_VALUE).plusSeconds(1) : plusSeconds(-secondsToSubtract)); }
Returns a copy of this duration with the specified duration in milliseconds subtracted.

This instance is immutable and unaffected by this method call.

Params:
  • millisToSubtract – the milliseconds to subtract, positive or negative
Throws:
Returns:a Duration based on this duration with the specified milliseconds subtracted, not null
/** * Returns a copy of this duration with the specified duration in milliseconds subtracted. * <p> * This instance is immutable and unaffected by this method call. * * @param millisToSubtract the milliseconds to subtract, positive or negative * @return a {@code Duration} based on this duration with the specified milliseconds subtracted, not null * @throws ArithmeticException if numeric overflow occurs */
public Duration minusMillis(long millisToSubtract) { return (millisToSubtract == Long.MIN_VALUE ? plusMillis(Long.MAX_VALUE).plusMillis(1) : plusMillis(-millisToSubtract)); }
Returns a copy of this duration with the specified duration in nanoseconds subtracted.

This instance is immutable and unaffected by this method call.

Params:
  • nanosToSubtract – the nanoseconds to subtract, positive or negative
Throws:
Returns:a Duration based on this duration with the specified nanoseconds subtracted, not null
/** * Returns a copy of this duration with the specified duration in nanoseconds subtracted. * <p> * This instance is immutable and unaffected by this method call. * * @param nanosToSubtract the nanoseconds to subtract, positive or negative * @return a {@code Duration} based on this duration with the specified nanoseconds subtracted, not null * @throws ArithmeticException if numeric overflow occurs */
public Duration minusNanos(long nanosToSubtract) { return (nanosToSubtract == Long.MIN_VALUE ? plusNanos(Long.MAX_VALUE).plusNanos(1) : plusNanos(-nanosToSubtract)); } //-----------------------------------------------------------------------
Returns a copy of this duration multiplied by the scalar.

This instance is immutable and unaffected by this method call.

Params:
  • multiplicand – the value to multiply the duration by, positive or negative
Throws:
Returns:a Duration based on this duration multiplied by the specified scalar, not null
/** * Returns a copy of this duration multiplied by the scalar. * <p> * This instance is immutable and unaffected by this method call. * * @param multiplicand the value to multiply the duration by, positive or negative * @return a {@code Duration} based on this duration multiplied by the specified scalar, not null * @throws ArithmeticException if numeric overflow occurs */
public Duration multipliedBy(long multiplicand) { if (multiplicand == 0) { return ZERO; } if (multiplicand == 1) { return this; } return create(toBigDecimalSeconds().multiply(BigDecimal.valueOf(multiplicand))); }
Returns a copy of this duration divided by the specified value.

This instance is immutable and unaffected by this method call.

Params:
  • divisor – the value to divide the duration by, positive or negative, not zero
Throws:
Returns:a Duration based on this duration divided by the specified divisor, not null
/** * Returns a copy of this duration divided by the specified value. * <p> * This instance is immutable and unaffected by this method call. * * @param divisor the value to divide the duration by, positive or negative, not zero * @return a {@code Duration} based on this duration divided by the specified divisor, not null * @throws ArithmeticException if the divisor is zero or if numeric overflow occurs */
public Duration dividedBy(long divisor) { if (divisor == 0) { throw new ArithmeticException("Cannot divide by zero"); } if (divisor == 1) { return this; } return create(toBigDecimalSeconds().divide(BigDecimal.valueOf(divisor), RoundingMode.DOWN)); }
Returns number of whole times a specified Duration occurs within this Duration.

This instance is immutable and unaffected by this method call.

Params:
  • divisor – the value to divide the duration by, positive or negative, not null
Throws:
Returns:number of whole times, rounded toward zero, a specified Duration occurs within this Duration, may be negative
Since:9
/** * Returns number of whole times a specified Duration occurs within this Duration. * <p> * This instance is immutable and unaffected by this method call. * * @param divisor the value to divide the duration by, positive or negative, not null * @return number of whole times, rounded toward zero, a specified * {@code Duration} occurs within this Duration, may be negative * @throws ArithmeticException if the divisor is zero, or if numeric overflow occurs * @since 9 */
public long dividedBy(Duration divisor) { Objects.requireNonNull(divisor, "divisor"); BigDecimal dividendBigD = toBigDecimalSeconds(); BigDecimal divisorBigD = divisor.toBigDecimalSeconds(); return dividendBigD.divideToIntegralValue(divisorBigD).longValueExact(); }
Converts this duration to the total length in seconds and fractional nanoseconds expressed as a BigDecimal.
Returns:the total length of the duration in seconds, with a scale of 9, not null
/** * Converts this duration to the total length in seconds and * fractional nanoseconds expressed as a {@code BigDecimal}. * * @return the total length of the duration in seconds, with a scale of 9, not null */
private BigDecimal toBigDecimalSeconds() { return BigDecimal.valueOf(seconds).add(BigDecimal.valueOf(nanos, 9)); }
Creates an instance of Duration from a number of seconds.
Params:
  • seconds – the number of seconds, up to scale 9, positive or negative
Throws:
Returns:a Duration, not null
/** * Creates an instance of {@code Duration} from a number of seconds. * * @param seconds the number of seconds, up to scale 9, positive or negative * @return a {@code Duration}, not null * @throws ArithmeticException if numeric overflow occurs */
private static Duration create(BigDecimal seconds) { BigInteger nanos = seconds.movePointRight(9).toBigIntegerExact(); BigInteger[] divRem = nanos.divideAndRemainder(BI_NANOS_PER_SECOND); if (divRem[0].bitLength() > 63) { throw new ArithmeticException("Exceeds capacity of Duration: " + nanos); } return ofSeconds(divRem[0].longValue(), divRem[1].intValue()); } //-----------------------------------------------------------------------
Returns a copy of this duration with the length negated.

This method swaps the sign of the total length of this duration. For example, PT1.3S will be returned as PT-1.3S.

This instance is immutable and unaffected by this method call.

Throws:
Returns:a Duration based on this duration with the amount negated, not null
/** * Returns a copy of this duration with the length negated. * <p> * This method swaps the sign of the total length of this duration. * For example, {@code PT1.3S} will be returned as {@code PT-1.3S}. * <p> * This instance is immutable and unaffected by this method call. * * @return a {@code Duration} based on this duration with the amount negated, not null * @throws ArithmeticException if numeric overflow occurs */
public Duration negated() { return multipliedBy(-1); }
Returns a copy of this duration with a positive length.

This method returns a positive duration by effectively removing the sign from any negative total length. For example, PT-1.3S will be returned as PT1.3S.

This instance is immutable and unaffected by this method call.

Throws:
Returns:a Duration based on this duration with an absolute length, not null
/** * Returns a copy of this duration with a positive length. * <p> * This method returns a positive duration by effectively removing the sign from any negative total length. * For example, {@code PT-1.3S} will be returned as {@code PT1.3S}. * <p> * This instance is immutable and unaffected by this method call. * * @return a {@code Duration} based on this duration with an absolute length, not null * @throws ArithmeticException if numeric overflow occurs */
public Duration abs() { return isNegative() ? negated() : this; } //-------------------------------------------------------------------------
Adds this duration to the specified temporal object.

This returns a temporal object of the same observable type as the input with this duration added.

In most cases, it is clearer to reverse the calling pattern by using Temporal.plus(TemporalAmount).

  // these two lines are equivalent, but the second approach is recommended
  dateTime = thisDuration.addTo(dateTime);
  dateTime = dateTime.plus(thisDuration);

The calculation will add the seconds, then nanos. Only non-zero amounts will be added.

This instance is immutable and unaffected by this method call.

Params:
  • temporal – the temporal object to adjust, not null
Throws:
Returns:an object of the same type with the adjustment made, not null
/** * Adds this duration to the specified temporal object. * <p> * This returns a temporal object of the same observable type as the input * with this duration added. * <p> * In most cases, it is clearer to reverse the calling pattern by using * {@link Temporal#plus(TemporalAmount)}. * <pre> * // these two lines are equivalent, but the second approach is recommended * dateTime = thisDuration.addTo(dateTime); * dateTime = dateTime.plus(thisDuration); * </pre> * <p> * The calculation will add the seconds, then nanos. * Only non-zero amounts will be added. * <p> * This instance is immutable and unaffected by this method call. * * @param temporal the temporal object to adjust, not null * @return an object of the same type with the adjustment made, not null * @throws DateTimeException if unable to add * @throws ArithmeticException if numeric overflow occurs */
@Override public Temporal addTo(Temporal temporal) { if (seconds != 0) { temporal = temporal.plus(seconds, SECONDS); } if (nanos != 0) { temporal = temporal.plus(nanos, NANOS); } return temporal; }
Subtracts this duration from the specified temporal object.

This returns a temporal object of the same observable type as the input with this duration subtracted.

In most cases, it is clearer to reverse the calling pattern by using Temporal.minus(TemporalAmount).

  // these two lines are equivalent, but the second approach is recommended
  dateTime = thisDuration.subtractFrom(dateTime);
  dateTime = dateTime.minus(thisDuration);

The calculation will subtract the seconds, then nanos. Only non-zero amounts will be added.

This instance is immutable and unaffected by this method call.

Params:
  • temporal – the temporal object to adjust, not null
Throws:
Returns:an object of the same type with the adjustment made, not null
/** * Subtracts this duration from the specified temporal object. * <p> * This returns a temporal object of the same observable type as the input * with this duration subtracted. * <p> * In most cases, it is clearer to reverse the calling pattern by using * {@link Temporal#minus(TemporalAmount)}. * <pre> * // these two lines are equivalent, but the second approach is recommended * dateTime = thisDuration.subtractFrom(dateTime); * dateTime = dateTime.minus(thisDuration); * </pre> * <p> * The calculation will subtract the seconds, then nanos. * Only non-zero amounts will be added. * <p> * This instance is immutable and unaffected by this method call. * * @param temporal the temporal object to adjust, not null * @return an object of the same type with the adjustment made, not null * @throws DateTimeException if unable to subtract * @throws ArithmeticException if numeric overflow occurs */
@Override public Temporal subtractFrom(Temporal temporal) { if (seconds != 0) { temporal = temporal.minus(seconds, SECONDS); } if (nanos != 0) { temporal = temporal.minus(nanos, NANOS); } return temporal; } //-----------------------------------------------------------------------
Gets the number of days in this duration.

This returns the total number of days in the duration by dividing the number of seconds by 86400. This is based on the standard definition of a day as 24 hours.

This instance is immutable and unaffected by this method call.

Returns:the number of days in the duration, may be negative
/** * Gets the number of days in this duration. * <p> * This returns the total number of days in the duration by dividing the * number of seconds by 86400. * This is based on the standard definition of a day as 24 hours. * <p> * This instance is immutable and unaffected by this method call. * * @return the number of days in the duration, may be negative */
public long toDays() { return seconds / SECONDS_PER_DAY; }
Gets the number of hours in this duration.

This returns the total number of hours in the duration by dividing the number of seconds by 3600.

This instance is immutable and unaffected by this method call.

Returns:the number of hours in the duration, may be negative
/** * Gets the number of hours in this duration. * <p> * This returns the total number of hours in the duration by dividing the * number of seconds by 3600. * <p> * This instance is immutable and unaffected by this method call. * * @return the number of hours in the duration, may be negative */
public long toHours() { return seconds / SECONDS_PER_HOUR; }
Gets the number of minutes in this duration.

This returns the total number of minutes in the duration by dividing the number of seconds by 60.

This instance is immutable and unaffected by this method call.

Returns:the number of minutes in the duration, may be negative
/** * Gets the number of minutes in this duration. * <p> * This returns the total number of minutes in the duration by dividing the * number of seconds by 60. * <p> * This instance is immutable and unaffected by this method call. * * @return the number of minutes in the duration, may be negative */
public long toMinutes() { return seconds / SECONDS_PER_MINUTE; }
Gets the number of seconds in this duration.

This returns the total number of whole seconds in the duration.

This instance is immutable and unaffected by this method call.

Returns:the whole seconds part of the length of the duration, positive or negative
Since:9
/** * Gets the number of seconds in this duration. * <p> * This returns the total number of whole seconds in the duration. * <p> * This instance is immutable and unaffected by this method call. * * @return the whole seconds part of the length of the duration, positive or negative * @since 9 */
public long toSeconds() { return seconds; }
Converts this duration to the total length in milliseconds.

If this duration is too large to fit in a long milliseconds, then an exception is thrown.

If this duration has greater than millisecond precision, then the conversion will drop any excess precision information as though the amount in nanoseconds was subject to integer division by one million.

Throws:
Returns:the total length of the duration in milliseconds
/** * Converts this duration to the total length in milliseconds. * <p> * If this duration is too large to fit in a {@code long} milliseconds, then an * exception is thrown. * <p> * If this duration has greater than millisecond precision, then the conversion * will drop any excess precision information as though the amount in nanoseconds * was subject to integer division by one million. * * @return the total length of the duration in milliseconds * @throws ArithmeticException if numeric overflow occurs */
public long toMillis() { long tempSeconds = seconds; long tempNanos = nanos; if (tempSeconds < 0) { // change the seconds and nano value to // handle Long.MIN_VALUE case tempSeconds = tempSeconds + 1; tempNanos = tempNanos - NANOS_PER_SECOND; } long millis = Math.multiplyExact(tempSeconds, 1000); millis = Math.addExact(millis, tempNanos / NANOS_PER_MILLI); return millis; }
Converts this duration to the total length in nanoseconds expressed as a long.

If this duration is too large to fit in a long nanoseconds, then an exception is thrown.

Throws:
Returns:the total length of the duration in nanoseconds
/** * Converts this duration to the total length in nanoseconds expressed as a {@code long}. * <p> * If this duration is too large to fit in a {@code long} nanoseconds, then an * exception is thrown. * * @return the total length of the duration in nanoseconds * @throws ArithmeticException if numeric overflow occurs */
public long toNanos() { long tempSeconds = seconds; long tempNanos = nanos; if (tempSeconds < 0) { // change the seconds and nano value to // handle Long.MIN_VALUE case tempSeconds = tempSeconds + 1; tempNanos = tempNanos - NANOS_PER_SECOND; } long totalNanos = Math.multiplyExact(tempSeconds, NANOS_PER_SECOND); totalNanos = Math.addExact(totalNanos, tempNanos); return totalNanos; }
Extracts the number of days in the duration.

This returns the total number of days in the duration by dividing the number of seconds by 86400. This is based on the standard definition of a day as 24 hours.

This instance is immutable and unaffected by this method call.

Returns:the number of days in the duration, may be negative
Since:9
/** * Extracts the number of days in the duration. * <p> * This returns the total number of days in the duration by dividing the * number of seconds by 86400. * This is based on the standard definition of a day as 24 hours. * <p> * This instance is immutable and unaffected by this method call. * * @return the number of days in the duration, may be negative * @since 9 */
public long toDaysPart(){ return seconds / SECONDS_PER_DAY; }
Extracts the number of hours part in the duration.

This returns the number of remaining hours when dividing toHours by hours in a day. This is based on the standard definition of a day as 24 hours.

This instance is immutable and unaffected by this method call.

Returns:the number of hours part in the duration, may be negative
Since:9
/** * Extracts the number of hours part in the duration. * <p> * This returns the number of remaining hours when dividing {@link #toHours} * by hours in a day. * This is based on the standard definition of a day as 24 hours. * <p> * This instance is immutable and unaffected by this method call. * * @return the number of hours part in the duration, may be negative * @since 9 */
public int toHoursPart(){ return (int) (toHours() % 24); }
Extracts the number of minutes part in the duration.

This returns the number of remaining minutes when dividing toMinutes by minutes in an hour. This is based on the standard definition of an hour as 60 minutes.

This instance is immutable and unaffected by this method call.

Returns:the number of minutes parts in the duration, may be negative
Since:9
/** * Extracts the number of minutes part in the duration. * <p> * This returns the number of remaining minutes when dividing {@link #toMinutes} * by minutes in an hour. * This is based on the standard definition of an hour as 60 minutes. * <p> * This instance is immutable and unaffected by this method call. * * @return the number of minutes parts in the duration, may be negative * @since 9 */
public int toMinutesPart(){ return (int) (toMinutes() % MINUTES_PER_HOUR); }
Extracts the number of seconds part in the duration.

This returns the remaining seconds when dividing toSeconds by seconds in a minute. This is based on the standard definition of a minute as 60 seconds.

This instance is immutable and unaffected by this method call.

Returns:the number of seconds parts in the duration, may be negative
Since:9
/** * Extracts the number of seconds part in the duration. * <p> * This returns the remaining seconds when dividing {@link #toSeconds} * by seconds in a minute. * This is based on the standard definition of a minute as 60 seconds. * <p> * This instance is immutable and unaffected by this method call. * * @return the number of seconds parts in the duration, may be negative * @since 9 */
public int toSecondsPart(){ return (int) (seconds % SECONDS_PER_MINUTE); }
Extracts the number of milliseconds part of the duration.

This returns the milliseconds part by dividing the number of nanoseconds by 1,000,000. The length of the duration is stored using two fields - seconds and nanoseconds. The nanoseconds part is a value from 0 to 999,999,999 that is an adjustment to the length in seconds. The total duration is defined by calling getNano() and getSeconds().

This instance is immutable and unaffected by this method call.

Returns:the number of milliseconds part of the duration.
Since:9
/** * Extracts the number of milliseconds part of the duration. * <p> * This returns the milliseconds part by dividing the number of nanoseconds by 1,000,000. * The length of the duration is stored using two fields - seconds and nanoseconds. * The nanoseconds part is a value from 0 to 999,999,999 that is an adjustment to * the length in seconds. * The total duration is defined by calling {@link #getNano()} and {@link #getSeconds()}. * <p> * This instance is immutable and unaffected by this method call. * * @return the number of milliseconds part of the duration. * @since 9 */
public int toMillisPart(){ return nanos / 1000_000; }
Get the nanoseconds part within seconds of the duration.

The length of the duration is stored using two fields - seconds and nanoseconds. The nanoseconds part is a value from 0 to 999,999,999 that is an adjustment to the length in seconds. The total duration is defined by calling getNano() and getSeconds().

This instance is immutable and unaffected by this method call.

Returns:the nanoseconds within the second part of the length of the duration, from 0 to 999,999,999
Since:9
/** * Get the nanoseconds part within seconds of the duration. * <p> * The length of the duration is stored using two fields - seconds and nanoseconds. * The nanoseconds part is a value from 0 to 999,999,999 that is an adjustment to * the length in seconds. * The total duration is defined by calling {@link #getNano()} and {@link #getSeconds()}. * <p> * This instance is immutable and unaffected by this method call. * * @return the nanoseconds within the second part of the length of the duration, from 0 to 999,999,999 * @since 9 */
public int toNanosPart(){ return nanos; } //-----------------------------------------------------------------------
Returns a copy of this Duration truncated to the specified unit.

Truncating the duration returns a copy of the original with conceptual fields smaller than the specified unit set to zero. For example, truncating with the MINUTES unit will round down to the nearest minute, setting the seconds and nanoseconds to zero.

The unit must have a duration that divides into the length of a standard day without remainder. This includes all supplied time units on ChronoUnit and DAYS. Other ChronoUnits throw an exception.

This instance is immutable and unaffected by this method call.

Params:
  • unit – the unit to truncate to, not null
Throws:
Returns:a Duration based on this duration with the time truncated, not null
Since:9
/** * Returns a copy of this {@code Duration} truncated to the specified unit. * <p> * Truncating the duration returns a copy of the original with conceptual fields * smaller than the specified unit set to zero. * For example, truncating with the {@link ChronoUnit#MINUTES MINUTES} unit will * round down to the nearest minute, setting the seconds and nanoseconds to zero. * <p> * The unit must have a {@linkplain TemporalUnit#getDuration() duration} * that divides into the length of a standard day without remainder. * This includes all supplied time units on {@link ChronoUnit} and * {@link ChronoUnit#DAYS DAYS}. Other ChronoUnits throw an exception. * <p> * This instance is immutable and unaffected by this method call. * * @param unit the unit to truncate to, not null * @return a {@code Duration} based on this duration with the time truncated, not null * @throws DateTimeException if the unit is invalid for truncation * @throws UnsupportedTemporalTypeException if the unit is not supported * @since 9 */
public Duration truncatedTo(TemporalUnit unit) { Objects.requireNonNull(unit, "unit"); if (unit == ChronoUnit.SECONDS && (seconds >= 0 || nanos == 0)) { return new Duration(seconds, 0); } else if (unit == ChronoUnit.NANOS) { return this; } Duration unitDur = unit.getDuration(); if (unitDur.getSeconds() > LocalTime.SECONDS_PER_DAY) { throw new UnsupportedTemporalTypeException("Unit is too large to be used for truncation"); } long dur = unitDur.toNanos(); if ((LocalTime.NANOS_PER_DAY % dur) != 0) { throw new UnsupportedTemporalTypeException("Unit must divide into a standard day without remainder"); } long nod = (seconds % LocalTime.SECONDS_PER_DAY) * LocalTime.NANOS_PER_SECOND + nanos; long result = (nod / dur) * dur ; return plusNanos(result - nod); } //-----------------------------------------------------------------------
Compares this duration to the specified Duration.

The comparison is based on the total length of the durations. It is "consistent with equals", as defined by Comparable.

Params:
  • otherDuration – the other duration to compare to, not null
Returns:the comparator value, negative if less, positive if greater
/** * Compares this duration to the specified {@code Duration}. * <p> * The comparison is based on the total length of the durations. * It is "consistent with equals", as defined by {@link Comparable}. * * @param otherDuration the other duration to compare to, not null * @return the comparator value, negative if less, positive if greater */
@Override public int compareTo(Duration otherDuration) { int cmp = Long.compare(seconds, otherDuration.seconds); if (cmp != 0) { return cmp; } return nanos - otherDuration.nanos; } //-----------------------------------------------------------------------
Checks if this duration is equal to the specified Duration.

The comparison is based on the total length of the durations.

Params:
  • otherDuration – the other duration, null returns false
Returns:true if the other duration is equal to this one
/** * Checks if this duration is equal to the specified {@code Duration}. * <p> * The comparison is based on the total length of the durations. * * @param otherDuration the other duration, null returns false * @return true if the other duration is equal to this one */
@Override public boolean equals(Object otherDuration) { if (this == otherDuration) { return true; } if (otherDuration instanceof Duration) { Duration other = (Duration) otherDuration; return this.seconds == other.seconds && this.nanos == other.nanos; } return false; }
A hash code for this duration.
Returns:a suitable hash code
/** * A hash code for this duration. * * @return a suitable hash code */
@Override public int hashCode() { return ((int) (seconds ^ (seconds >>> 32))) + (51 * nanos); } //-----------------------------------------------------------------------
A string representation of this duration using ISO-8601 seconds based representation, such as PT8H6M12.345S.

The format of the returned string will be PTnHnMnS, where n is the relevant hours, minutes or seconds part of the duration. Any fractional seconds are placed after a decimal point in the seconds section. If a section has a zero value, it is omitted. The hours, minutes and seconds will all have the same sign.

Examples:

   "20.345 seconds"                 -- "PT20.345S
   "15 minutes" (15 * 60 seconds)   -- "PT15M"
   "10 hours" (10 * 3600 seconds)   -- "PT10H"
   "2 days" (2 * 86400 seconds)     -- "PT48H"
Note that multiples of 24 hours are not output as days to avoid confusion with Period.
Returns:an ISO-8601 representation of this duration, not null
/** * A string representation of this duration using ISO-8601 seconds * based representation, such as {@code PT8H6M12.345S}. * <p> * The format of the returned string will be {@code PTnHnMnS}, where n is * the relevant hours, minutes or seconds part of the duration. * Any fractional seconds are placed after a decimal point in the seconds section. * If a section has a zero value, it is omitted. * The hours, minutes and seconds will all have the same sign. * <p> * Examples: * <pre> * "20.345 seconds" -- "PT20.345S * "15 minutes" (15 * 60 seconds) -- "PT15M" * "10 hours" (10 * 3600 seconds) -- "PT10H" * "2 days" (2 * 86400 seconds) -- "PT48H" * </pre> * Note that multiples of 24 hours are not output as days to avoid confusion * with {@code Period}. * * @return an ISO-8601 representation of this duration, not null */
@Override public String toString() { if (this == ZERO) { return "PT0S"; } long effectiveTotalSecs = seconds; if (seconds < 0 && nanos > 0) { effectiveTotalSecs++; } long hours = effectiveTotalSecs / SECONDS_PER_HOUR; int minutes = (int) ((effectiveTotalSecs % SECONDS_PER_HOUR) / SECONDS_PER_MINUTE); int secs = (int) (effectiveTotalSecs % SECONDS_PER_MINUTE); StringBuilder buf = new StringBuilder(24); buf.append("PT"); if (hours != 0) { buf.append(hours).append('H'); } if (minutes != 0) { buf.append(minutes).append('M'); } if (secs == 0 && nanos == 0 && buf.length() > 2) { return buf.toString(); } if (seconds < 0 && nanos > 0) { if (secs == 0) { buf.append("-0"); } else { buf.append(secs); } } else { buf.append(secs); } if (nanos > 0) { int pos = buf.length(); if (seconds < 0) { buf.append(2 * NANOS_PER_SECOND - nanos); } else { buf.append(nanos + NANOS_PER_SECOND); } while (buf.charAt(buf.length() - 1) == '0') { buf.setLength(buf.length() - 1); } buf.setCharAt(pos, '.'); } buf.append('S'); return buf.toString(); } //-----------------------------------------------------------------------
Writes the object using a dedicated serialized form.
@serialData
 out.writeByte(1);  // identifies a Duration
 out.writeLong(seconds);
 out.writeInt(nanos);
Returns:the instance of Ser, not null
/** * Writes the object using a * <a href="../../serialized-form.html#java.time.Ser">dedicated serialized form</a>. * @serialData * <pre> * out.writeByte(1); // identifies a Duration * out.writeLong(seconds); * out.writeInt(nanos); * </pre> * * @return the instance of {@code Ser}, not null */
private Object writeReplace() { return new Ser(Ser.DURATION_TYPE, this); }
Defend against malicious streams.
Params:
  • s – the stream to read
Throws:
/** * Defend against malicious streams. * * @param s the stream to read * @throws InvalidObjectException always */
private void readObject(ObjectInputStream s) throws InvalidObjectException { throw new InvalidObjectException("Deserialization via serialization delegate"); } void writeExternal(DataOutput out) throws IOException { out.writeLong(seconds); out.writeInt(nanos); } static Duration readExternal(DataInput in) throws IOException { long seconds = in.readLong(); int nanos = in.readInt(); return Duration.ofSeconds(seconds, nanos); } }