/*
* Copyright (c) 1999, 2009, Oracle and/or its affiliates. All rights reserved.
* DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
*
* This code is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 only, as
* published by the Free Software Foundation. Oracle designates this
* particular file as subject to the "Classpath" exception as provided
* by Oracle in the LICENSE file that accompanied this code.
*
* This code is distributed in the hope that it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
* version 2 for more details (a copy is included in the LICENSE file that
* accompanied this code).
*
* You should have received a copy of the GNU General Public License version
* 2 along with this work; if not, write to the Free Software Foundation,
* Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.
*
* Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA
* or visit www.oracle.com if you need additional information or have any
* questions.
*/
package java.util.regex;
An engine that performs match operations on a character sequence
by interpreting a Pattern
. A matcher is created from a pattern by invoking the pattern's matcher
method. Once created, a matcher can be used to perform three different kinds of match operations:
The matches
method attempts to match the entire input sequence against the pattern.
The lookingAt
method attempts to match the input sequence, starting at the beginning, against the pattern.
The find
method scans the input sequence looking for the next subsequence that matches the pattern.
Each of these methods returns a boolean indicating success or failure.
More information about a successful match can be obtained by querying the
state of the matcher.
A matcher finds matches in a subset of its input called the
region. By default, the region contains all of the matcher's input. The region can be modified via theregion
method and queried via the regionStart
and regionEnd
methods. The way that the region boundaries interact with some pattern constructs can be changed. See
useAnchoringBounds
and useTransparentBounds
for more details.
This class also defines methods for replacing matched subsequences with new strings whose contents can, if desired, be computed from the match result. The appendReplacement
and appendTail
methods can be used in tandem in order to collect the result into an existing string buffer, or the more convenient replaceAll
method can be used to create a string in which every matching subsequence in the input sequence is replaced.
The explicit state of a matcher includes the start and end indices of
the most recent successful match. It also includes the start and end
indices of the input subsequence captured by each capturing group in the pattern as well as a total
count of such subsequences. As a convenience, methods are also provided for
returning these captured subsequences in string form.
The explicit state of a matcher is initially undefined; attempting to query any part of it before a successful match will cause an IllegalStateException
to be thrown. The explicit state of a matcher is recomputed by every match operation.
The implicit state of a matcher includes the input character sequence as
well as the append position, which is initially zero and is updated by the appendReplacement
method.
A matcher may be reset explicitly by invoking its reset()
method or, if a new input sequence is desired, its reset(CharSequence)
method. Resetting a matcher discards its explicit state information and sets the append position to zero.
Instances of this class are not safe for use by multiple concurrent
threads.
Author: Mike McCloskey, Mark Reinhold, JSR-51 Expert Group Since: 1.4 @spec JSR-51
/**
* An engine that performs match operations on a {@link java.lang.CharSequence
* </code>character sequence<code>} by interpreting a {@link Pattern}.
*
* <p> A matcher is created from a pattern by invoking the pattern's {@link
* Pattern#matcher matcher} method. Once created, a matcher can be used to
* perform three different kinds of match operations:
*
* <ul>
*
* <li><p> The {@link #matches matches} method attempts to match the entire
* input sequence against the pattern. </p></li>
*
* <li><p> The {@link #lookingAt lookingAt} method attempts to match the
* input sequence, starting at the beginning, against the pattern. </p></li>
*
* <li><p> The {@link #find find} method scans the input sequence looking for
* the next subsequence that matches the pattern. </p></li>
*
* </ul>
*
* <p> Each of these methods returns a boolean indicating success or failure.
* More information about a successful match can be obtained by querying the
* state of the matcher.
*
* <p> A matcher finds matches in a subset of its input called the
* <i>region</i>. By default, the region contains all of the matcher's input.
* The region can be modified via the{@link #region region} method and queried
* via the {@link #regionStart regionStart} and {@link #regionEnd regionEnd}
* methods. The way that the region boundaries interact with some pattern
* constructs can be changed. See {@link #useAnchoringBounds
* useAnchoringBounds} and {@link #useTransparentBounds useTransparentBounds}
* for more details.
*
* <p> This class also defines methods for replacing matched subsequences with
* new strings whose contents can, if desired, be computed from the match
* result. The {@link #appendReplacement appendReplacement} and {@link
* #appendTail appendTail} methods can be used in tandem in order to collect
* the result into an existing string buffer, or the more convenient {@link
* #replaceAll replaceAll} method can be used to create a string in which every
* matching subsequence in the input sequence is replaced.
*
* <p> The explicit state of a matcher includes the start and end indices of
* the most recent successful match. It also includes the start and end
* indices of the input subsequence captured by each <a
* href="Pattern.html#cg">capturing group</a> in the pattern as well as a total
* count of such subsequences. As a convenience, methods are also provided for
* returning these captured subsequences in string form.
*
* <p> The explicit state of a matcher is initially undefined; attempting to
* query any part of it before a successful match will cause an {@link
* IllegalStateException} to be thrown. The explicit state of a matcher is
* recomputed by every match operation.
*
* <p> The implicit state of a matcher includes the input character sequence as
* well as the <i>append position</i>, which is initially zero and is updated
* by the {@link #appendReplacement appendReplacement} method.
*
* <p> A matcher may be reset explicitly by invoking its {@link #reset()}
* method or, if a new input sequence is desired, its {@link
* #reset(java.lang.CharSequence) reset(CharSequence)} method. Resetting a
* matcher discards its explicit state information and sets the append position
* to zero.
*
* <p> Instances of this class are not safe for use by multiple concurrent
* threads. </p>
*
*
* @author Mike McCloskey
* @author Mark Reinhold
* @author JSR-51 Expert Group
* @since 1.4
* @spec JSR-51
*/
public final class Matcher implements MatchResult {
The Pattern object that created this Matcher.
/**
* The Pattern object that created this Matcher.
*/
Pattern parentPattern;
The storage used by groups. They may contain invalid values if
a group was skipped during the matching.
/**
* The storage used by groups. They may contain invalid values if
* a group was skipped during the matching.
*/
int[] groups;
The range within the sequence that is to be matched. Anchors
will match at these "hard" boundaries. Changing the region
changes these values.
/**
* The range within the sequence that is to be matched. Anchors
* will match at these "hard" boundaries. Changing the region
* changes these values.
*/
int from, to;
Lookbehind uses this value to ensure that the subexpression
match ends at the point where the lookbehind was encountered.
/**
* Lookbehind uses this value to ensure that the subexpression
* match ends at the point where the lookbehind was encountered.
*/
int lookbehindTo;
The original string being matched.
/**
* The original string being matched.
*/
CharSequence text;
Matcher state used by the last node. NOANCHOR is used when a
match does not have to consume all of the input. ENDANCHOR is
the mode used for matching all the input.
/**
* Matcher state used by the last node. NOANCHOR is used when a
* match does not have to consume all of the input. ENDANCHOR is
* the mode used for matching all the input.
*/
static final int ENDANCHOR = 1;
static final int NOANCHOR = 0;
int acceptMode = NOANCHOR;
The range of string that last matched the pattern. If the last
match failed then first is -1; last initially holds 0 then it
holds the index of the end of the last match (which is where the
next search starts).
/**
* The range of string that last matched the pattern. If the last
* match failed then first is -1; last initially holds 0 then it
* holds the index of the end of the last match (which is where the
* next search starts).
*/
int first = -1, last = 0;
The end index of what matched in the last match operation.
/**
* The end index of what matched in the last match operation.
*/
int oldLast = -1;
The index of the last position appended in a substitution.
/**
* The index of the last position appended in a substitution.
*/
int lastAppendPosition = 0;
Storage used by nodes to tell what repetition they are on in
a pattern, and where groups begin. The nodes themselves are stateless,
so they rely on this field to hold state during a match.
/**
* Storage used by nodes to tell what repetition they are on in
* a pattern, and where groups begin. The nodes themselves are stateless,
* so they rely on this field to hold state during a match.
*/
int[] locals;
Boolean indicating whether or not more input could change
the results of the last match.
If hitEnd is true, and a match was found, then more input
might cause a different match to be found.
If hitEnd is true and a match was not found, then more
input could cause a match to be found.
If hitEnd is false and a match was found, then more input
will not change the match.
If hitEnd is false and a match was not found, then more
input will not cause a match to be found.
/**
* Boolean indicating whether or not more input could change
* the results of the last match.
*
* If hitEnd is true, and a match was found, then more input
* might cause a different match to be found.
* If hitEnd is true and a match was not found, then more
* input could cause a match to be found.
* If hitEnd is false and a match was found, then more input
* will not change the match.
* If hitEnd is false and a match was not found, then more
* input will not cause a match to be found.
*/
boolean hitEnd;
Boolean indicating whether or not more input could change
a positive match into a negative one.
If requireEnd is true, and a match was found, then more
input could cause the match to be lost.
If requireEnd is false and a match was found, then more
input might change the match but the match won't be lost.
If a match was not found, then requireEnd has no meaning.
/**
* Boolean indicating whether or not more input could change
* a positive match into a negative one.
*
* If requireEnd is true, and a match was found, then more
* input could cause the match to be lost.
* If requireEnd is false and a match was found, then more
* input might change the match but the match won't be lost.
* If a match was not found, then requireEnd has no meaning.
*/
boolean requireEnd;
If transparentBounds is true then the boundaries of this
matcher's region are transparent to lookahead, lookbehind,
and boundary matching constructs that try to see beyond them.
/**
* If transparentBounds is true then the boundaries of this
* matcher's region are transparent to lookahead, lookbehind,
* and boundary matching constructs that try to see beyond them.
*/
boolean transparentBounds = false;
If anchoringBounds is true then the boundaries of this
matcher's region match anchors such as ^ and $.
/**
* If anchoringBounds is true then the boundaries of this
* matcher's region match anchors such as ^ and $.
*/
boolean anchoringBounds = true;
No default constructor.
/**
* No default constructor.
*/
Matcher() {
}
All matchers have the state used by Pattern during a match.
/**
* All matchers have the state used by Pattern during a match.
*/
Matcher(Pattern parent, CharSequence text) {
this.parentPattern = parent;
this.text = text;
// Allocate state storage
int parentGroupCount = Math.max(parent.capturingGroupCount, 10);
groups = new int[parentGroupCount * 2];
locals = new int[parent.localCount];
// Put fields into initial states
reset();
}
Returns the pattern that is interpreted by this matcher.
Returns: The pattern for which this matcher was created
/**
* Returns the pattern that is interpreted by this matcher.
*
* @return The pattern for which this matcher was created
*/
public Pattern pattern() {
return parentPattern;
}
Returns the match state of this matcher as a MatchResult
. The result is unaffected by subsequent operations performed upon this matcher. Returns: a MatchResult
with the state of this matcher Since: 1.5
/**
* Returns the match state of this matcher as a {@link MatchResult}.
* The result is unaffected by subsequent operations performed upon this
* matcher.
*
* @return a <code>MatchResult</code> with the state of this matcher
* @since 1.5
*/
public MatchResult toMatchResult() {
Matcher result = new Matcher(this.parentPattern, text.toString());
result.first = this.first;
result.last = this.last;
result.groups = this.groups.clone();
return result;
}
Changes the Pattern that this Matcher uses to
find matches with.
This method causes this matcher to lose information
about the groups of the last match that occurred. The
matcher's position in the input is maintained and its
last append position is unaffected.
Params: - newPattern –
The new pattern used by this matcher
Throws: - IllegalArgumentException –
If newPattern is null
Returns: This matcher Since: 1.5
/**
* Changes the <tt>Pattern</tt> that this <tt>Matcher</tt> uses to
* find matches with.
*
* <p> This method causes this matcher to lose information
* about the groups of the last match that occurred. The
* matcher's position in the input is maintained and its
* last append position is unaffected.</p>
*
* @param newPattern
* The new pattern used by this matcher
* @return This matcher
* @throws IllegalArgumentException
* If newPattern is <tt>null</tt>
* @since 1.5
*/
public Matcher usePattern(Pattern newPattern) {
if (newPattern == null)
throw new IllegalArgumentException("Pattern cannot be null");
parentPattern = newPattern;
// Reallocate state storage
int parentGroupCount = Math.max(newPattern.capturingGroupCount, 10);
groups = new int[parentGroupCount * 2];
locals = new int[newPattern.localCount];
for (int i = 0; i < groups.length; i++)
groups[i] = -1;
for (int i = 0; i < locals.length; i++)
locals[i] = -1;
return this;
}
Resets this matcher.
Resetting a matcher discards all of its explicit state information
and sets its append position to zero. The matcher's region is set to the
default region, which is its entire character sequence. The anchoring
and transparency of this matcher's region boundaries are unaffected.
Returns: This matcher
/**
* Resets this matcher.
*
* <p> Resetting a matcher discards all of its explicit state information
* and sets its append position to zero. The matcher's region is set to the
* default region, which is its entire character sequence. The anchoring
* and transparency of this matcher's region boundaries are unaffected.
*
* @return This matcher
*/
public Matcher reset() {
first = -1;
last = 0;
oldLast = -1;
for(int i=0; i<groups.length; i++)
groups[i] = -1;
for(int i=0; i<locals.length; i++)
locals[i] = -1;
lastAppendPosition = 0;
from = 0;
to = getTextLength();
return this;
}
Resets this matcher with a new input sequence.
Resetting a matcher discards all of its explicit state information
and sets its append position to zero. The matcher's region is set to
the default region, which is its entire character sequence. The
anchoring and transparency of this matcher's region boundaries are
unaffected.
Params: - input –
The new input character sequence
Returns: This matcher
/**
* Resets this matcher with a new input sequence.
*
* <p> Resetting a matcher discards all of its explicit state information
* and sets its append position to zero. The matcher's region is set to
* the default region, which is its entire character sequence. The
* anchoring and transparency of this matcher's region boundaries are
* unaffected.
*
* @param input
* The new input character sequence
*
* @return This matcher
*/
public Matcher reset(CharSequence input) {
text = input;
return reset();
}
Returns the start index of the previous match.
Throws: - IllegalStateException –
If no match has yet been attempted,
or if the previous match operation failed
Returns: The index of the first character matched
/**
* Returns the start index of the previous match. </p>
*
* @return The index of the first character matched
*
* @throws IllegalStateException
* If no match has yet been attempted,
* or if the previous match operation failed
*/
public int start() {
if (first < 0)
throw new IllegalStateException("No match available");
return first;
}
Returns the start index of the subsequence captured by the given group
during the previous match operation.
Capturing groups are indexed from left
to right, starting at one. Group zero denotes the entire pattern, so
the expression m.start(0) is equivalent to
m.start().
Params: - group –
The index of a capturing group in this matcher's pattern
Throws: - IllegalStateException –
If no match has yet been attempted,
or if the previous match operation failed
- IndexOutOfBoundsException –
If there is no capturing group in the pattern
with the given index
Returns: The index of the first character captured by the group,
or -1 if the match was successful but the group
itself did not match anything
/**
* Returns the start index of the subsequence captured by the given group
* during the previous match operation.
*
* <p> <a href="Pattern.html#cg">Capturing groups</a> are indexed from left
* to right, starting at one. Group zero denotes the entire pattern, so
* the expression <i>m.</i><tt>start(0)</tt> is equivalent to
* <i>m.</i><tt>start()</tt>. </p>
*
* @param group
* The index of a capturing group in this matcher's pattern
*
* @return The index of the first character captured by the group,
* or <tt>-1</tt> if the match was successful but the group
* itself did not match anything
*
* @throws IllegalStateException
* If no match has yet been attempted,
* or if the previous match operation failed
*
* @throws IndexOutOfBoundsException
* If there is no capturing group in the pattern
* with the given index
*/
public int start(int group) {
if (first < 0)
throw new IllegalStateException("No match available");
if (group > groupCount())
throw new IndexOutOfBoundsException("No group " + group);
return groups[group * 2];
}
Returns the offset after the last character matched.
Throws: - IllegalStateException –
If no match has yet been attempted,
or if the previous match operation failed
Returns: The offset after the last character matched
/**
* Returns the offset after the last character matched. </p>
*
* @return The offset after the last character matched
*
* @throws IllegalStateException
* If no match has yet been attempted,
* or if the previous match operation failed
*/
public int end() {
if (first < 0)
throw new IllegalStateException("No match available");
return last;
}
Returns the offset after the last character of the subsequence
captured by the given group during the previous match operation.
Capturing groups are indexed from left
to right, starting at one. Group zero denotes the entire pattern, so
the expression m.end(0) is equivalent to
m.end().
Params: - group –
The index of a capturing group in this matcher's pattern
Throws: - IllegalStateException –
If no match has yet been attempted,
or if the previous match operation failed
- IndexOutOfBoundsException –
If there is no capturing group in the pattern
with the given index
Returns: The offset after the last character captured by the group,
or -1 if the match was successful
but the group itself did not match anything
/**
* Returns the offset after the last character of the subsequence
* captured by the given group during the previous match operation.
*
* <p> <a href="Pattern.html#cg">Capturing groups</a> are indexed from left
* to right, starting at one. Group zero denotes the entire pattern, so
* the expression <i>m.</i><tt>end(0)</tt> is equivalent to
* <i>m.</i><tt>end()</tt>. </p>
*
* @param group
* The index of a capturing group in this matcher's pattern
*
* @return The offset after the last character captured by the group,
* or <tt>-1</tt> if the match was successful
* but the group itself did not match anything
*
* @throws IllegalStateException
* If no match has yet been attempted,
* or if the previous match operation failed
*
* @throws IndexOutOfBoundsException
* If there is no capturing group in the pattern
* with the given index
*/
public int end(int group) {
if (first < 0)
throw new IllegalStateException("No match available");
if (group > groupCount())
throw new IndexOutOfBoundsException("No group " + group);
return groups[group * 2 + 1];
}
Returns the input subsequence matched by the previous match.
For a matcher m with input sequence s,
the expressions m.group() and
s.substring(m.start(), m.end())
are equivalent.
Note that some patterns, for example a*, match the empty
string. This method will return the empty string when the pattern
successfully matches the empty string in the input.
Throws: - IllegalStateException –
If no match has yet been attempted,
or if the previous match operation failed
Returns: The (possibly empty) subsequence matched by the previous match,
in string form
/**
* Returns the input subsequence matched by the previous match.
*
* <p> For a matcher <i>m</i> with input sequence <i>s</i>,
* the expressions <i>m.</i><tt>group()</tt> and
* <i>s.</i><tt>substring(</tt><i>m.</i><tt>start(),</tt> <i>m.</i><tt>end())</tt>
* are equivalent. </p>
*
* <p> Note that some patterns, for example <tt>a*</tt>, match the empty
* string. This method will return the empty string when the pattern
* successfully matches the empty string in the input. </p>
*
* @return The (possibly empty) subsequence matched by the previous match,
* in string form
*
* @throws IllegalStateException
* If no match has yet been attempted,
* or if the previous match operation failed
*/
public String group() {
return group(0);
}
Returns the input subsequence captured by the given group during the
previous match operation.
For a matcher m, input sequence s, and group index
g, the expressions m.group(g) and
s.substring(m.start(g), m.end(g))
are equivalent.
Capturing groups are indexed from left
to right, starting at one. Group zero denotes the entire pattern, so
the expression m.group(0) is equivalent to m.group().
If the match was successful but the group specified failed to match
any part of the input sequence, then null is returned. Note
that some groups, for example (a*), match the empty string.
This method will return the empty string when such a group successfully
matches the empty string in the input.
Params: - group –
The index of a capturing group in this matcher's pattern
Throws: - IllegalStateException –
If no match has yet been attempted,
or if the previous match operation failed
- IndexOutOfBoundsException –
If there is no capturing group in the pattern
with the given index
Returns: The (possibly empty) subsequence captured by the group
during the previous match, or null if the group
failed to match part of the input
/**
* Returns the input subsequence captured by the given group during the
* previous match operation.
*
* <p> For a matcher <i>m</i>, input sequence <i>s</i>, and group index
* <i>g</i>, the expressions <i>m.</i><tt>group(</tt><i>g</i><tt>)</tt> and
* <i>s.</i><tt>substring(</tt><i>m.</i><tt>start(</tt><i>g</i><tt>),</tt> <i>m.</i><tt>end(</tt><i>g</i><tt>))</tt>
* are equivalent. </p>
*
* <p> <a href="Pattern.html#cg">Capturing groups</a> are indexed from left
* to right, starting at one. Group zero denotes the entire pattern, so
* the expression <tt>m.group(0)</tt> is equivalent to <tt>m.group()</tt>.
* </p>
*
* <p> If the match was successful but the group specified failed to match
* any part of the input sequence, then <tt>null</tt> is returned. Note
* that some groups, for example <tt>(a*)</tt>, match the empty string.
* This method will return the empty string when such a group successfully
* matches the empty string in the input. </p>
*
* @param group
* The index of a capturing group in this matcher's pattern
*
* @return The (possibly empty) subsequence captured by the group
* during the previous match, or <tt>null</tt> if the group
* failed to match part of the input
*
* @throws IllegalStateException
* If no match has yet been attempted,
* or if the previous match operation failed
*
* @throws IndexOutOfBoundsException
* If there is no capturing group in the pattern
* with the given index
*/
public String group(int group) {
if (first < 0)
throw new IllegalStateException("No match found");
if (group < 0 || group > groupCount())
throw new IndexOutOfBoundsException("No group " + group);
if ((groups[group*2] == -1) || (groups[group*2+1] == -1))
return null;
return getSubSequence(groups[group * 2], groups[group * 2 + 1]).toString();
}
Returns the input subsequence captured by the given
named-capturing group during the previous
match operation.
If the match was successful but the group specified failed to match
any part of the input sequence, then null is returned. Note
that some groups, for example (a*), match the empty string.
This method will return the empty string when such a group successfully
matches the empty string in the input.
Params: - name –
The name of a named-capturing group in this matcher's pattern
Throws: - IllegalStateException –
If no match has yet been attempted,
or if the previous match operation failed
- IllegalArgumentException –
If there is no capturing group in the pattern
with the given name
Returns: The (possibly empty) subsequence captured by the named group
during the previous match, or null if the group
failed to match part of the input Since: 1.7
/**
* Returns the input subsequence captured by the given
* <a href="Pattern.html#groupname">named-capturing group</a> during the previous
* match operation.
*
* <p> If the match was successful but the group specified failed to match
* any part of the input sequence, then <tt>null</tt> is returned. Note
* that some groups, for example <tt>(a*)</tt>, match the empty string.
* This method will return the empty string when such a group successfully
* matches the empty string in the input. </p>
*
* @param name
* The name of a named-capturing group in this matcher's pattern
*
* @return The (possibly empty) subsequence captured by the named group
* during the previous match, or <tt>null</tt> if the group
* failed to match part of the input
*
* @throws IllegalStateException
* If no match has yet been attempted,
* or if the previous match operation failed
*
* @throws IllegalArgumentException
* If there is no capturing group in the pattern
* with the given name
* @since 1.7
*/
public String group(String name) {
if (name == null)
throw new NullPointerException("Null group name");
if (first < 0)
throw new IllegalStateException("No match found");
if (!parentPattern.namedGroups().containsKey(name))
throw new IllegalArgumentException("No group with name <" + name + ">");
int group = parentPattern.namedGroups().get(name);
if ((groups[group*2] == -1) || (groups[group*2+1] == -1))
return null;
return getSubSequence(groups[group * 2], groups[group * 2 + 1]).toString();
}
Returns the number of capturing groups in this matcher's pattern.
Group zero denotes the entire pattern by convention. It is not
included in this count.
Any non-negative integer smaller than or equal to the value
returned by this method is guaranteed to be a valid group index for
this matcher.
Returns: The number of capturing groups in this matcher's pattern
/**
* Returns the number of capturing groups in this matcher's pattern.
*
* <p> Group zero denotes the entire pattern by convention. It is not
* included in this count.
*
* <p> Any non-negative integer smaller than or equal to the value
* returned by this method is guaranteed to be a valid group index for
* this matcher. </p>
*
* @return The number of capturing groups in this matcher's pattern
*/
public int groupCount() {
return parentPattern.capturingGroupCount - 1;
}
Attempts to match the entire region against the pattern.
If the match succeeds then more information can be obtained via the
start, end, and group methods.
Returns: true if, and only if, the entire region sequence
matches this matcher's pattern
/**
* Attempts to match the entire region against the pattern.
*
* <p> If the match succeeds then more information can be obtained via the
* <tt>start</tt>, <tt>end</tt>, and <tt>group</tt> methods. </p>
*
* @return <tt>true</tt> if, and only if, the entire region sequence
* matches this matcher's pattern
*/
public boolean matches() {
return match(from, ENDANCHOR);
}
Attempts to find the next subsequence of the input sequence that matches
the pattern.
This method starts at the beginning of this matcher's region, or, if
a previous invocation of the method was successful and the matcher has
not since been reset, at the first character not matched by the previous
match.
If the match succeeds then more information can be obtained via the
start, end, and group methods.
Returns: true if, and only if, a subsequence of the input
sequence matches this matcher's pattern
/**
* Attempts to find the next subsequence of the input sequence that matches
* the pattern.
*
* <p> This method starts at the beginning of this matcher's region, or, if
* a previous invocation of the method was successful and the matcher has
* not since been reset, at the first character not matched by the previous
* match.
*
* <p> If the match succeeds then more information can be obtained via the
* <tt>start</tt>, <tt>end</tt>, and <tt>group</tt> methods. </p>
*
* @return <tt>true</tt> if, and only if, a subsequence of the input
* sequence matches this matcher's pattern
*/
public boolean find() {
int nextSearchIndex = last;
if (nextSearchIndex == first)
nextSearchIndex++;
// If next search starts before region, start it at region
if (nextSearchIndex < from)
nextSearchIndex = from;
// If next search starts beyond region then it fails
if (nextSearchIndex > to) {
for (int i = 0; i < groups.length; i++)
groups[i] = -1;
return false;
}
return search(nextSearchIndex);
}
Resets this matcher and then attempts to find the next subsequence of
the input sequence that matches the pattern, starting at the specified
index.
If the match succeeds then more information can be obtained via the
start, end, and group methods, and subsequent invocations of the find()
method will start at the first character not matched by this match.
Throws: - IndexOutOfBoundsException –
If start is less than zero or if start is greater than the
length of the input sequence.
Returns: true if, and only if, a subsequence of the input
sequence starting at the given index matches this matcher's
pattern
/**
* Resets this matcher and then attempts to find the next subsequence of
* the input sequence that matches the pattern, starting at the specified
* index.
*
* <p> If the match succeeds then more information can be obtained via the
* <tt>start</tt>, <tt>end</tt>, and <tt>group</tt> methods, and subsequent
* invocations of the {@link #find()} method will start at the first
* character not matched by this match. </p>
*
* @throws IndexOutOfBoundsException
* If start is less than zero or if start is greater than the
* length of the input sequence.
*
* @return <tt>true</tt> if, and only if, a subsequence of the input
* sequence starting at the given index matches this matcher's
* pattern
*/
public boolean find(int start) {
int limit = getTextLength();
if ((start < 0) || (start > limit))
throw new IndexOutOfBoundsException("Illegal start index");
reset();
return search(start);
}
Attempts to match the input sequence, starting at the beginning of the
region, against the pattern.
Like the matches
method, this method always starts at the beginning of the region; unlike that method, it does not require that the entire region be matched.
If the match succeeds then more information can be obtained via the
start, end, and group methods.
Returns: true if, and only if, a prefix of the input
sequence matches this matcher's pattern
/**
* Attempts to match the input sequence, starting at the beginning of the
* region, against the pattern.
*
* <p> Like the {@link #matches matches} method, this method always starts
* at the beginning of the region; unlike that method, it does not
* require that the entire region be matched.
*
* <p> If the match succeeds then more information can be obtained via the
* <tt>start</tt>, <tt>end</tt>, and <tt>group</tt> methods. </p>
*
* @return <tt>true</tt> if, and only if, a prefix of the input
* sequence matches this matcher's pattern
*/
public boolean lookingAt() {
return match(from, NOANCHOR);
}
Returns a literal replacement String
for the specified
String
.
This method produces a String
that will work
as a literal replacement s
in the
appendReplacement
method of the Matcher
class. The String
produced will match the sequence of characters
in s
treated as a literal sequence. Slashes ('\') and
dollar signs ('$') will be given no special meaning.
Params: - s – The string to be literalized
Returns: A literal string replacement Since: 1.5
/**
* Returns a literal replacement <code>String</code> for the specified
* <code>String</code>.
*
* This method produces a <code>String</code> that will work
* as a literal replacement <code>s</code> in the
* <code>appendReplacement</code> method of the {@link Matcher} class.
* The <code>String</code> produced will match the sequence of characters
* in <code>s</code> treated as a literal sequence. Slashes ('\') and
* dollar signs ('$') will be given no special meaning.
*
* @param s The string to be literalized
* @return A literal string replacement
* @since 1.5
*/
public static String quoteReplacement(String s) {
if ((s.indexOf('\\') == -1) && (s.indexOf('$') == -1))
return s;
StringBuilder sb = new StringBuilder();
for (int i=0; i<s.length(); i++) {
char c = s.charAt(i);
if (c == '\\' || c == '$') {
sb.append('\\');
}
sb.append(c);
}
return sb.toString();
}
Implements a non-terminal append-and-replace step.
This method performs the following actions:
It reads characters from the input sequence, starting at the append position, and appends them to the given string buffer. It stops after reading the last character preceding the previous match, that is, the character at index start()
- 1.
It appends the given replacement string to the string buffer.
It sets the append position of this matcher to the index of the last character matched, plus one, that is, to end()
.
The replacement string may contain references to subsequences
captured during the previous match: Each occurrence of
${name} or $g will be replaced by the result of evaluating the corresponding group(name)
or group(g)
respectively. For $g,
the first number after the $ is always treated as part of
the group reference. Subsequent numbers are incorporated into g if
they would form a legal group reference. Only the numerals '0'
through '9' are considered as potential components of the group
reference. If the second group matched the string "foo", for
example, then passing the replacement string "$2bar" would
cause "foobar" to be appended to the string buffer. A dollar
sign ($) may be included as a literal in the replacement
string by preceding it with a backslash (\$).
Note that backslashes (\) and dollar signs ($) in
the replacement string may cause the results to be different than if it
were being treated as a literal replacement string. Dollar signs may be
treated as references to captured subsequences as described above, and
backslashes are used to escape literal characters in the replacement
string.
This method is intended to be used in a loop together with the appendTail
and find
methods. The following code, for example, writes one dog two dogs in the
yard to the standard-output stream:
Pattern p = Pattern.compile("cat");
Matcher m = p.matcher("one cat two cats in the yard");
StringBuffer sb = new StringBuffer();
while (m.find()) {
m.appendReplacement(sb, "dog");
}
m.appendTail(sb);
System.out.println(sb.toString());
Params: - sb –
The target string buffer
- replacement –
The replacement string
Throws: - IllegalStateException –
If no match has yet been attempted,
or if the previous match operation failed
- IllegalArgumentException –
If the replacement string refers to a named-capturing
group that does not exist in the pattern
- IndexOutOfBoundsException –
If the replacement string refers to a capturing group
that does not exist in the pattern
Returns: This matcher
/**
* Implements a non-terminal append-and-replace step.
*
* <p> This method performs the following actions: </p>
*
* <ol>
*
* <li><p> It reads characters from the input sequence, starting at the
* append position, and appends them to the given string buffer. It
* stops after reading the last character preceding the previous match,
* that is, the character at index {@link
* #start()} <tt>-</tt> <tt>1</tt>. </p></li>
*
* <li><p> It appends the given replacement string to the string buffer.
* </p></li>
*
* <li><p> It sets the append position of this matcher to the index of
* the last character matched, plus one, that is, to {@link #end()}.
* </p></li>
*
* </ol>
*
* <p> The replacement string may contain references to subsequences
* captured during the previous match: Each occurrence of
* <tt>${</tt><i>name</i><tt>}</tt> or <tt>$</tt><i>g</i>
* will be replaced by the result of evaluating the corresponding
* {@link #group(String) group(name)} or {@link #group(int) group(g)</tt>}
* respectively. For <tt>$</tt><i>g</i><tt></tt>,
* the first number after the <tt>$</tt> is always treated as part of
* the group reference. Subsequent numbers are incorporated into g if
* they would form a legal group reference. Only the numerals '0'
* through '9' are considered as potential components of the group
* reference. If the second group matched the string <tt>"foo"</tt>, for
* example, then passing the replacement string <tt>"$2bar"</tt> would
* cause <tt>"foobar"</tt> to be appended to the string buffer. A dollar
* sign (<tt>$</tt>) may be included as a literal in the replacement
* string by preceding it with a backslash (<tt>\$</tt>).
*
* <p> Note that backslashes (<tt>\</tt>) and dollar signs (<tt>$</tt>) in
* the replacement string may cause the results to be different than if it
* were being treated as a literal replacement string. Dollar signs may be
* treated as references to captured subsequences as described above, and
* backslashes are used to escape literal characters in the replacement
* string.
*
* <p> This method is intended to be used in a loop together with the
* {@link #appendTail appendTail} and {@link #find find} methods. The
* following code, for example, writes <tt>one dog two dogs in the
* yard</tt> to the standard-output stream: </p>
*
* <blockquote><pre>
* Pattern p = Pattern.compile("cat");
* Matcher m = p.matcher("one cat two cats in the yard");
* StringBuffer sb = new StringBuffer();
* while (m.find()) {
* m.appendReplacement(sb, "dog");
* }
* m.appendTail(sb);
* System.out.println(sb.toString());</pre></blockquote>
*
* @param sb
* The target string buffer
*
* @param replacement
* The replacement string
*
* @return This matcher
*
* @throws IllegalStateException
* If no match has yet been attempted,
* or if the previous match operation failed
*
* @throws IllegalArgumentException
* If the replacement string refers to a named-capturing
* group that does not exist in the pattern
*
* @throws IndexOutOfBoundsException
* If the replacement string refers to a capturing group
* that does not exist in the pattern
*/
public Matcher appendReplacement(StringBuffer sb, String replacement) {
// If no match, return error
if (first < 0)
throw new IllegalStateException("No match available");
// Process substitution string to replace group references with groups
int cursor = 0;
StringBuilder result = new StringBuilder();
while (cursor < replacement.length()) {
char nextChar = replacement.charAt(cursor);
if (nextChar == '\\') {
cursor++;
nextChar = replacement.charAt(cursor);
result.append(nextChar);
cursor++;
} else if (nextChar == '$') {
// Skip past $
cursor++;
// A StringIndexOutOfBoundsException is thrown if
// this "$" is the last character in replacement
// string in current implementation, a IAE might be
// more appropriate.
nextChar = replacement.charAt(cursor);
int refNum = -1;
if (nextChar == '{') {
cursor++;
StringBuilder gsb = new StringBuilder();
while (cursor < replacement.length()) {
nextChar = replacement.charAt(cursor);
if (ASCII.isLower(nextChar) ||
ASCII.isUpper(nextChar) ||
ASCII.isDigit(nextChar)) {
gsb.append(nextChar);
cursor++;
} else {
break;
}
}
if (gsb.length() == 0)
throw new IllegalArgumentException(
"named capturing group has 0 length name");
if (nextChar != '}')
throw new IllegalArgumentException(
"named capturing group is missing trailing '}'");
String gname = gsb.toString();
if (ASCII.isDigit(gname.charAt(0)))
throw new IllegalArgumentException(
"capturing group name {" + gname +
"} starts with digit character");
if (!parentPattern.namedGroups().containsKey(gname))
throw new IllegalArgumentException(
"No group with name {" + gname + "}");
refNum = parentPattern.namedGroups().get(gname);
cursor++;
} else {
// The first number is always a group
refNum = (int)nextChar - '0';
if ((refNum < 0)||(refNum > 9))
throw new IllegalArgumentException(
"Illegal group reference");
cursor++;
// Capture the largest legal group string
boolean done = false;
while (!done) {
if (cursor >= replacement.length()) {
break;
}
int nextDigit = replacement.charAt(cursor) - '0';
if ((nextDigit < 0)||(nextDigit > 9)) { // not a number
break;
}
int newRefNum = (refNum * 10) + nextDigit;
if (groupCount() < newRefNum) {
done = true;
} else {
refNum = newRefNum;
cursor++;
}
}
}
// Append group
if (start(refNum) != -1 && end(refNum) != -1)
result.append(text, start(refNum), end(refNum));
} else {
result.append(nextChar);
cursor++;
}
}
// Append the intervening text
sb.append(text, lastAppendPosition, first);
// Append the match substitution
sb.append(result);
lastAppendPosition = last;
return this;
}
Implements a terminal append-and-replace step.
This method reads characters from the input sequence, starting at the append position, and appends them to the given string buffer. It is intended to be invoked after one or more invocations of the appendReplacement
method in order to copy the remainder of the input sequence.
Params: - sb –
The target string buffer
Returns: The target string buffer
/**
* Implements a terminal append-and-replace step.
*
* <p> This method reads characters from the input sequence, starting at
* the append position, and appends them to the given string buffer. It is
* intended to be invoked after one or more invocations of the {@link
* #appendReplacement appendReplacement} method in order to copy the
* remainder of the input sequence. </p>
*
* @param sb
* The target string buffer
*
* @return The target string buffer
*/
public StringBuffer appendTail(StringBuffer sb) {
sb.append(text, lastAppendPosition, getTextLength());
return sb;
}
Replaces every subsequence of the input sequence that matches the
pattern with the given replacement string.
This method first resets this matcher. It then scans the input sequence looking for matches of the pattern. Characters that are not part of any match are appended directly to the result string; each match is replaced in the result by the replacement string. The replacement string may contain references to captured subsequences as in the appendReplacement
method.
Note that backslashes (\) and dollar signs ($) in
the replacement string may cause the results to be different than if it
were being treated as a literal replacement string. Dollar signs may be
treated as references to captured subsequences as described above, and
backslashes are used to escape literal characters in the replacement
string.
Given the regular expression a*b, the input
"aabfooaabfooabfoob", and the replacement string
"-", an invocation of this method on a matcher for that
expression would yield the string "-foo-foo-foo-".
Invoking this method changes this matcher's state. If the matcher
is to be used in further matching operations then it should first be
reset.
Params: - replacement –
The replacement string
Returns: The string constructed by replacing each matching subsequence
by the replacement string, substituting captured subsequences
as needed
/**
* Replaces every subsequence of the input sequence that matches the
* pattern with the given replacement string.
*
* <p> This method first resets this matcher. It then scans the input
* sequence looking for matches of the pattern. Characters that are not
* part of any match are appended directly to the result string; each match
* is replaced in the result by the replacement string. The replacement
* string may contain references to captured subsequences as in the {@link
* #appendReplacement appendReplacement} method.
*
* <p> Note that backslashes (<tt>\</tt>) and dollar signs (<tt>$</tt>) in
* the replacement string may cause the results to be different than if it
* were being treated as a literal replacement string. Dollar signs may be
* treated as references to captured subsequences as described above, and
* backslashes are used to escape literal characters in the replacement
* string.
*
* <p> Given the regular expression <tt>a*b</tt>, the input
* <tt>"aabfooaabfooabfoob"</tt>, and the replacement string
* <tt>"-"</tt>, an invocation of this method on a matcher for that
* expression would yield the string <tt>"-foo-foo-foo-"</tt>.
*
* <p> Invoking this method changes this matcher's state. If the matcher
* is to be used in further matching operations then it should first be
* reset. </p>
*
* @param replacement
* The replacement string
*
* @return The string constructed by replacing each matching subsequence
* by the replacement string, substituting captured subsequences
* as needed
*/
public String replaceAll(String replacement) {
reset();
boolean result = find();
if (result) {
StringBuffer sb = new StringBuffer();
do {
appendReplacement(sb, replacement);
result = find();
} while (result);
appendTail(sb);
return sb.toString();
}
return text.toString();
}
Replaces the first subsequence of the input sequence that matches the
pattern with the given replacement string.
This method first resets this matcher. It then scans the input sequence looking for a match of the pattern. Characters that are not part of the match are appended directly to the result string; the match is replaced in the result by the replacement string. The replacement string may contain references to captured subsequences as in the appendReplacement
method.
Note that backslashes (\) and dollar signs ($) in
the replacement string may cause the results to be different than if it
were being treated as a literal replacement string. Dollar signs may be
treated as references to captured subsequences as described above, and
backslashes are used to escape literal characters in the replacement
string.
Given the regular expression dog, the input
"zzzdogzzzdogzzz", and the replacement string
"cat", an invocation of this method on a matcher for that
expression would yield the string "zzzcatzzzdogzzz".
Invoking this method changes this matcher's state. If the matcher
is to be used in further matching operations then it should first be
reset.
Params: - replacement –
The replacement string
Returns: The string constructed by replacing the first matching
subsequence by the replacement string, substituting captured
subsequences as needed
/**
* Replaces the first subsequence of the input sequence that matches the
* pattern with the given replacement string.
*
* <p> This method first resets this matcher. It then scans the input
* sequence looking for a match of the pattern. Characters that are not
* part of the match are appended directly to the result string; the match
* is replaced in the result by the replacement string. The replacement
* string may contain references to captured subsequences as in the {@link
* #appendReplacement appendReplacement} method.
*
* <p>Note that backslashes (<tt>\</tt>) and dollar signs (<tt>$</tt>) in
* the replacement string may cause the results to be different than if it
* were being treated as a literal replacement string. Dollar signs may be
* treated as references to captured subsequences as described above, and
* backslashes are used to escape literal characters in the replacement
* string.
*
* <p> Given the regular expression <tt>dog</tt>, the input
* <tt>"zzzdogzzzdogzzz"</tt>, and the replacement string
* <tt>"cat"</tt>, an invocation of this method on a matcher for that
* expression would yield the string <tt>"zzzcatzzzdogzzz"</tt>. </p>
*
* <p> Invoking this method changes this matcher's state. If the matcher
* is to be used in further matching operations then it should first be
* reset. </p>
*
* @param replacement
* The replacement string
* @return The string constructed by replacing the first matching
* subsequence by the replacement string, substituting captured
* subsequences as needed
*/
public String replaceFirst(String replacement) {
if (replacement == null)
throw new NullPointerException("replacement");
reset();
if (!find())
return text.toString();
StringBuffer sb = new StringBuffer();
appendReplacement(sb, replacement);
appendTail(sb);
return sb.toString();
}
Sets the limits of this matcher's region. The region is the part of the
input sequence that will be searched to find a match. Invoking this
method resets the matcher, and then sets the region to start at the
index specified by the start
parameter and end at the
index specified by the end
parameter.
Depending on the transparency and anchoring being used (see useTransparentBounds
and useAnchoringBounds
), certain constructs such as anchors may behave differently at or around the boundaries of the region.
Params: - start –
The index to start searching at (inclusive)
- end –
The index to end searching at (exclusive)
Throws: - IndexOutOfBoundsException –
If start or end is less than zero, if
start is greater than the length of the input sequence, if
end is greater than the length of the input sequence, or if
start is greater than end.
Returns: this matcher Since: 1.5
/**
* Sets the limits of this matcher's region. The region is the part of the
* input sequence that will be searched to find a match. Invoking this
* method resets the matcher, and then sets the region to start at the
* index specified by the <code>start</code> parameter and end at the
* index specified by the <code>end</code> parameter.
*
* <p>Depending on the transparency and anchoring being used (see
* {@link #useTransparentBounds useTransparentBounds} and
* {@link #useAnchoringBounds useAnchoringBounds}), certain constructs such
* as anchors may behave differently at or around the boundaries of the
* region.
*
* @param start
* The index to start searching at (inclusive)
* @param end
* The index to end searching at (exclusive)
* @throws IndexOutOfBoundsException
* If start or end is less than zero, if
* start is greater than the length of the input sequence, if
* end is greater than the length of the input sequence, or if
* start is greater than end.
* @return this matcher
* @since 1.5
*/
public Matcher region(int start, int end) {
if ((start < 0) || (start > getTextLength()))
throw new IndexOutOfBoundsException("start");
if ((end < 0) || (end > getTextLength()))
throw new IndexOutOfBoundsException("end");
if (start > end)
throw new IndexOutOfBoundsException("start > end");
reset();
from = start;
to = end;
return this;
}
Reports the start index of this matcher's region. The searches this matcher conducts are limited to finding matches within regionStart
(inclusive) and regionEnd
(exclusive). Returns: The starting point of this matcher's region Since: 1.5
/**
* Reports the start index of this matcher's region. The
* searches this matcher conducts are limited to finding matches
* within {@link #regionStart regionStart} (inclusive) and
* {@link #regionEnd regionEnd} (exclusive).
*
* @return The starting point of this matcher's region
* @since 1.5
*/
public int regionStart() {
return from;
}
Reports the end index (exclusive) of this matcher's region. The searches this matcher conducts are limited to finding matches within regionStart
(inclusive) and regionEnd
(exclusive). Returns: the ending point of this matcher's region Since: 1.5
/**
* Reports the end index (exclusive) of this matcher's region.
* The searches this matcher conducts are limited to finding matches
* within {@link #regionStart regionStart} (inclusive) and
* {@link #regionEnd regionEnd} (exclusive).
*
* @return the ending point of this matcher's region
* @since 1.5
*/
public int regionEnd() {
return to;
}
Queries the transparency of region bounds for this matcher.
This method returns true if this matcher uses
transparent bounds, false if it uses opaque
bounds.
See useTransparentBounds
for a description of transparent and opaque bounds.
By default, a matcher uses opaque region boundaries.
See Also: Returns: true iff this matcher is using transparent bounds,
false otherwise. Since: 1.5
/**
* Queries the transparency of region bounds for this matcher.
*
* <p> This method returns <tt>true</tt> if this matcher uses
* <i>transparent</i> bounds, <tt>false</tt> if it uses <i>opaque</i>
* bounds.
*
* <p> See {@link #useTransparentBounds useTransparentBounds} for a
* description of transparent and opaque bounds.
*
* <p> By default, a matcher uses opaque region boundaries.
*
* @return <tt>true</tt> iff this matcher is using transparent bounds,
* <tt>false</tt> otherwise.
* @see java.util.regex.Matcher#useTransparentBounds(boolean)
* @since 1.5
*/
public boolean hasTransparentBounds() {
return transparentBounds;
}
Sets the transparency of region bounds for this matcher.
Invoking this method with an argument of true will set this
matcher to use transparent bounds. If the boolean
argument is false, then opaque bounds will be used.
Using transparent bounds, the boundaries of this
matcher's region are transparent to lookahead, lookbehind,
and boundary matching constructs. Those constructs can see beyond the
boundaries of the region to see if a match is appropriate.
Using opaque bounds, the boundaries of this matcher's
region are opaque to lookahead, lookbehind, and boundary matching
constructs that may try to see beyond them. Those constructs cannot
look past the boundaries so they will fail to match anything outside
of the region.
By default, a matcher uses opaque bounds.
Params: - b – a boolean indicating whether to use opaque or transparent
regions
See Also: Returns: this matcher Since: 1.5
/**
* Sets the transparency of region bounds for this matcher.
*
* <p> Invoking this method with an argument of <tt>true</tt> will set this
* matcher to use <i>transparent</i> bounds. If the boolean
* argument is <tt>false</tt>, then <i>opaque</i> bounds will be used.
*
* <p> Using transparent bounds, the boundaries of this
* matcher's region are transparent to lookahead, lookbehind,
* and boundary matching constructs. Those constructs can see beyond the
* boundaries of the region to see if a match is appropriate.
*
* <p> Using opaque bounds, the boundaries of this matcher's
* region are opaque to lookahead, lookbehind, and boundary matching
* constructs that may try to see beyond them. Those constructs cannot
* look past the boundaries so they will fail to match anything outside
* of the region.
*
* <p> By default, a matcher uses opaque bounds.
*
* @param b a boolean indicating whether to use opaque or transparent
* regions
* @return this matcher
* @see java.util.regex.Matcher#hasTransparentBounds
* @since 1.5
*/
public Matcher useTransparentBounds(boolean b) {
transparentBounds = b;
return this;
}
Queries the anchoring of region bounds for this matcher.
This method returns true if this matcher uses
anchoring bounds, false otherwise.
See useAnchoringBounds
for a description of anchoring bounds.
By default, a matcher uses anchoring region boundaries.
See Also: Returns: true iff this matcher is using anchoring bounds,
false otherwise. Since: 1.5
/**
* Queries the anchoring of region bounds for this matcher.
*
* <p> This method returns <tt>true</tt> if this matcher uses
* <i>anchoring</i> bounds, <tt>false</tt> otherwise.
*
* <p> See {@link #useAnchoringBounds useAnchoringBounds} for a
* description of anchoring bounds.
*
* <p> By default, a matcher uses anchoring region boundaries.
*
* @return <tt>true</tt> iff this matcher is using anchoring bounds,
* <tt>false</tt> otherwise.
* @see java.util.regex.Matcher#useAnchoringBounds(boolean)
* @since 1.5
*/
public boolean hasAnchoringBounds() {
return anchoringBounds;
}
Sets the anchoring of region bounds for this matcher.
Invoking this method with an argument of true will set this
matcher to use anchoring bounds. If the boolean
argument is false, then non-anchoring bounds will be
used.
Using anchoring bounds, the boundaries of this
matcher's region match anchors such as ^ and $.
Without anchoring bounds, the boundaries of this
matcher's region will not match anchors such as ^ and $.
By default, a matcher uses anchoring region boundaries.
Params: - b – a boolean indicating whether or not to use anchoring bounds.
See Also: Returns: this matcher Since: 1.5
/**
* Sets the anchoring of region bounds for this matcher.
*
* <p> Invoking this method with an argument of <tt>true</tt> will set this
* matcher to use <i>anchoring</i> bounds. If the boolean
* argument is <tt>false</tt>, then <i>non-anchoring</i> bounds will be
* used.
*
* <p> Using anchoring bounds, the boundaries of this
* matcher's region match anchors such as ^ and $.
*
* <p> Without anchoring bounds, the boundaries of this
* matcher's region will not match anchors such as ^ and $.
*
* <p> By default, a matcher uses anchoring region boundaries.
*
* @param b a boolean indicating whether or not to use anchoring bounds.
* @return this matcher
* @see java.util.regex.Matcher#hasAnchoringBounds
* @since 1.5
*/
public Matcher useAnchoringBounds(boolean b) {
anchoringBounds = b;
return this;
}
Returns the string representation of this matcher. The
string representation of a Matcher
contains information
that may be useful for debugging. The exact format is unspecified.
Returns: The string representation of this matcher Since: 1.5
/**
* <p>Returns the string representation of this matcher. The
* string representation of a <code>Matcher</code> contains information
* that may be useful for debugging. The exact format is unspecified.
*
* @return The string representation of this matcher
* @since 1.5
*/
public String toString() {
StringBuilder sb = new StringBuilder();
sb.append("java.util.regex.Matcher");
sb.append("[pattern=" + pattern());
sb.append(" region=");
sb.append(regionStart() + "," + regionEnd());
sb.append(" lastmatch=");
if ((first >= 0) && (group() != null)) {
sb.append(group());
}
sb.append("]");
return sb.toString();
}
Returns true if the end of input was hit by the search engine in
the last match operation performed by this matcher.
When this method returns true, then it is possible that more input
would have changed the result of the last search.
Returns: true iff the end of input was hit in the last match; false
otherwise Since: 1.5
/**
* <p>Returns true if the end of input was hit by the search engine in
* the last match operation performed by this matcher.
*
* <p>When this method returns true, then it is possible that more input
* would have changed the result of the last search.
*
* @return true iff the end of input was hit in the last match; false
* otherwise
* @since 1.5
*/
public boolean hitEnd() {
return hitEnd;
}
Returns true if more input could change a positive match into a
negative one.
If this method returns true, and a match was found, then more
input could cause the match to be lost. If this method returns false
and a match was found, then more input might change the match but the
match won't be lost. If a match was not found, then requireEnd has no
meaning.
Returns: true iff more input could change a positive match into a
negative one. Since: 1.5
/**
* <p>Returns true if more input could change a positive match into a
* negative one.
*
* <p>If this method returns true, and a match was found, then more
* input could cause the match to be lost. If this method returns false
* and a match was found, then more input might change the match but the
* match won't be lost. If a match was not found, then requireEnd has no
* meaning.
*
* @return true iff more input could change a positive match into a
* negative one.
* @since 1.5
*/
public boolean requireEnd() {
return requireEnd;
}
Initiates a search to find a Pattern within the given bounds.
The groups are filled with default values and the match of the root
of the state machine is called. The state machine will hold the state
of the match as it proceeds in this matcher.
Matcher.from is not set here, because it is the "hard" boundary
of the start of the search which anchors will set to. The from param
is the "soft" boundary of the start of the search, meaning that the
regex tries to match at that index but ^ won't match there. Subsequent
calls to the search methods start at a new "soft" boundary which is
the end of the previous match.
/**
* Initiates a search to find a Pattern within the given bounds.
* The groups are filled with default values and the match of the root
* of the state machine is called. The state machine will hold the state
* of the match as it proceeds in this matcher.
*
* Matcher.from is not set here, because it is the "hard" boundary
* of the start of the search which anchors will set to. The from param
* is the "soft" boundary of the start of the search, meaning that the
* regex tries to match at that index but ^ won't match there. Subsequent
* calls to the search methods start at a new "soft" boundary which is
* the end of the previous match.
*/
boolean search(int from) {
this.hitEnd = false;
this.requireEnd = false;
from = from < 0 ? 0 : from;
this.first = from;
this.oldLast = oldLast < 0 ? from : oldLast;
for (int i = 0; i < groups.length; i++)
groups[i] = -1;
acceptMode = NOANCHOR;
boolean result = parentPattern.root.match(this, from, text);
if (!result)
this.first = -1;
this.oldLast = this.last;
return result;
}
Initiates a search for an anchored match to a Pattern within the given
bounds. The groups are filled with default values and the match of the
root of the state machine is called. The state machine will hold the
state of the match as it proceeds in this matcher.
/**
* Initiates a search for an anchored match to a Pattern within the given
* bounds. The groups are filled with default values and the match of the
* root of the state machine is called. The state machine will hold the
* state of the match as it proceeds in this matcher.
*/
boolean match(int from, int anchor) {
this.hitEnd = false;
this.requireEnd = false;
from = from < 0 ? 0 : from;
this.first = from;
this.oldLast = oldLast < 0 ? from : oldLast;
for (int i = 0; i < groups.length; i++)
groups[i] = -1;
acceptMode = anchor;
boolean result = parentPattern.matchRoot.match(this, from, text);
if (!result)
this.first = -1;
this.oldLast = this.last;
return result;
}
Returns the end index of the text.
Returns: the index after the last character in the text
/**
* Returns the end index of the text.
*
* @return the index after the last character in the text
*/
int getTextLength() {
return text.length();
}
Generates a String from this Matcher's input in the specified range.
Params: - beginIndex – the beginning index, inclusive
- endIndex – the ending index, exclusive
Returns: A String generated from this Matcher's input
/**
* Generates a String from this Matcher's input in the specified range.
*
* @param beginIndex the beginning index, inclusive
* @param endIndex the ending index, exclusive
* @return A String generated from this Matcher's input
*/
CharSequence getSubSequence(int beginIndex, int endIndex) {
return text.subSequence(beginIndex, endIndex);
}
Returns this Matcher's input character at index i.
Returns: A char from the specified index
/**
* Returns this Matcher's input character at index i.
*
* @return A char from the specified index
*/
char charAt(int i) {
return text.charAt(i);
}
}