https://openjdk.java.net/ 
/*
 * Copyright (c) 2003, 2006, Oracle and/or its affiliates. All rights reserved.
 * DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
 *
 * This code is free software; you can redistribute it and/or modify it
 * under the terms of the GNU General Public License version 2 only, as
 * published by the Free Software Foundation.  Oracle designates this
 * particular file as subject to the "Classpath" exception as provided
 * by Oracle in the LICENSE file that accompanied this code.
 *
 * This code is distributed in the hope that it will be useful, but WITHOUT
 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
 * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
 * version 2 for more details (a copy is included in the LICENSE file that
 * accompanied this code).
 *
 * You should have received a copy of the GNU General Public License version
 * 2 along with this work; if not, write to the Free Software Foundation,
 * Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.
 *
 * Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA
 * or visit www.oracle.com if you need additional information or have any
 * questions.
 */

package com.sun.jdi.connect.spi;

import java.io.IOException;


A connection between a debugger and a target VM which it debugs.

 A Connection represents a bi-directional communication channel between a debugger and a target VM. A Connection is created when TransportService establishes a connection and successfully handshakes with a target VM. A TransportService implementation provides a reliable JDWP packet transportation service and consequently a Connection provides a reliable flow of JDWP packets between the debugger and the target VM. A Connection is stream oriented, that is, the JDWP packets written to a connection are read by the target VM in the order in which they were written. Similiarly packets written to a Connection by the target VM are read by the debugger in the order in which they were written. 
 A connection is either open or closed. It is open upon creation, and remains open until it is closed. Once closed, it remains closed, and any attempt to invoke an I/O operation upon it will cause a ClosedConnectionException to be thrown. A connection can be tested by invoking the isOpen method. 
 A Connection is safe for access by multiple concurrent threads,
although at most one thread may be reading and at most one thread may
be writing at any given time. 


Since:1.5
/**
 * A connection between a debugger and a target VM which it debugs.
 *
 * <p> A Connection represents a bi-directional communication channel
 * between a debugger and a target VM. A Connection is created when
 * {@link com.sun.jdi.connect.spi.TransportService TransportService}
 * establishes a connection and successfully handshakes with a target
 * VM. A TransportService implementation provides a reliable
 * JDWP packet transportation service and consequently a Connection
 * provides a reliable flow of JDWP packets between the debugger
 * and the target VM. A Connection is stream oriented, that is, the
 * JDWP packets written to a connection are read by the target VM
 * in the order in which they were written. Similiarly packets written
 * to a Connection by the target VM are read by the debugger in the
 * order in which they were written.
 *
 * <p> A connection is either open or closed. It is open upon creation,
 * and remains open until it is closed. Once closed, it remains closed,
 * and any attempt to invoke an I/O operation upon it will cause a
 * {@link ClosedConnectionException} to be thrown. A connection can
 * be tested by invoking the {@link #isOpen isOpen} method.
 *
 * <p> A Connection is safe for access by multiple concurrent threads,
 * although at most one thread may be reading and at most one thread may
 * be writing at any given time. </p>
 *
 * @since 1.5
 */

public abstract class Connection {

    
Reads a packet from the target VM.

 Attempts to read a JDWP packet from the target VM.
A read operation may block indefinitely and only returns
when it reads all bytes of a packet, or in the case of a
transport service that is based on a stream-oriented
communication protocol, the end of stream is encountered.

 Reading a packet does not do any integrity checking on
the packet aside from a check that the length of the packet
(as indicated by the value of the length field, the
first four bytes of the packet) is 11 or more bytes.
If the value of the length value is less then 11
then an IOException is thrown.

 Returns a byte array of a length equal to the length
of the received packet, or a byte array of length 0 when an
end of stream is encountered. If end of stream is encountered
after some, but not all bytes of a packet, are read then it
is considered an I/O error and an IOException is
thrown. The first byte of the packet is stored in element
0 of the byte array, the second in element 1,
and so on. The bytes in the byte array are laid out as per the

JDWP specification. That is, all fields in the packet
are in big endian order as per the JDWP specification.

 This method may be invoked at any time. If another thread has already initiated a readPacket on this connection then the invocation of this method will block until the first operation is complete. 


Throws:
  • ClosedConnectionException – 
         If the connection is closed, or another thread closes
         the connection while the readPacket is in progress.
  • IOException – 
         If the length of the packet (as indictaed by the first
         4 bytes) is less than 11 bytes, or an I/O error occurs.
Returns: the packet read from the target VM
/**
     * Reads a packet from the target VM.
     *
     * <p> Attempts to read a JDWP packet from the target VM.
     * A read operation may block indefinitely and only returns
     * when it reads all bytes of a packet, or in the case of a
     * transport service that is based on a stream-oriented
     * communication protocol, the end of stream is encountered.
     *
     * <p> Reading a packet does not do any integrity checking on
     * the packet aside from a check that the length of the packet
     * (as indicated by the value of the <tt>length</tt> field, the
     * first four bytes of the packet) is 11 or more bytes.
     * If the value of the <tt>length</tt> value is less then 11
     * then an <tt>IOException</tt> is thrown.
     *
     * <p> Returns a byte array of a length equal to the length
     * of the received packet, or a byte array of length 0 when an
     * end of stream is encountered. If end of stream is encountered
     * after some, but not all bytes of a packet, are read then it
     * is considered an I/O error and an <tt>IOException</tt> is
     * thrown. The first byte of the packet is stored in element
     * <tt>0</tt> of the byte array, the second in element <tt>1</tt>,
     * and so on. The bytes in the byte array are laid out as per the
     * <a href="../../../../../../../../../technotes/guides/jpda/jdwp-spec.html">
     * JDWP specification</a>. That is, all fields in the packet
     * are in big endian order as per the JDWP specification.
     *
     * <p> This method may be invoked at any time.  If another thread has
     * already initiated a {@link #readPacket readPacket} on this
     * connection then the invocation of this method will block until the
     * first operation is complete. </p>
     *
     * @return  the packet read from the target VM
     *
     * @throws  ClosedConnectionException
     *          If the connection is closed, or another thread closes
     *          the connection while the readPacket is in progress.
     *
     * @throws  java.io.IOException
     *          If the length of the packet (as indictaed by the first
     *          4 bytes) is less than 11 bytes, or an I/O error occurs.
     *
     *
     */
    public abstract byte[] readPacket() throws IOException;

    
Writes a packet to the target VM.

 Attempts to write, or send, a JDWP packet to the target VM.
A write operation only returns after writing the entire packet
to the target VM. Writing the entire packet does not mean
the entire packet has been transmitted to the target VM
but rather that all bytes have been written to the
transport service. A transport service based on a TCP/IP connection
may, for example, buffer some or all of the packet before
transmission on the network.

 The byte array provided to this method should be laid out
as per the 
JDWP specification. That is, all fields in the packet
are in big endian order. The first byte, that is element
pkt[0], is the first byte of the length field.
pkt[1] is the second byte of the length field,
and so on.

 Writing a packet does not do any integrity checking on
the packet aside from checking the packet length. Checking
the packet length requires checking that the value of the
length field (as indicated by the first four bytes
of the packet) is 11 or greater. Consequently the length of
the byte array provided to this method, that is
pkt.length, must be 11 or more, and must be equal
or greater than the value of the length field. If the
length of the byte array is greater than the value of
the length field then all bytes from element
pkt[length] onwards are ignored. In other words,
any additional bytes that follow the packet in the byte
array are ignored and will not be transmitted to the target
VM.

 A write operation may block or may complete immediately.
The exact circumstances when an operation blocks depends on
the transport service. In the case of a TCP/IP connection to
the target VM, the writePacket method may block if there is
network congestion or there is insufficient space to buffer
the packet in the underlying network system.

 This method may be invoked at any time.  If another thread has
already initiated a write operation upon this Connection then
a subsequent invocation of this method will block until the first
operation is complete. 


Params:
  • pkt – 
         The packet to write to the target VM.
Throws:
/**
     * Writes a packet to the target VM.
     *
     * <p> Attempts to write, or send, a JDWP packet to the target VM.
     * A write operation only returns after writing the entire packet
     * to the target VM. Writing the entire packet does not mean
     * the entire packet has been transmitted to the target VM
     * but rather that all bytes have been written to the
     * transport service. A transport service based on a TCP/IP connection
     * may, for example, buffer some or all of the packet before
     * transmission on the network.
     *
     * <p> The byte array provided to this method should be laid out
     * as per the <a
     * href="../../../../../../../../../technotes/guides/jpda/jdwp-spec.html">
     * JDWP specification</a>. That is, all fields in the packet
     * are in big endian order. The first byte, that is element
     * <tt>pkt[0]</tt>, is the first byte of the <tt>length</tt> field.
     * <tt>pkt[1]</tt> is the second byte of the <tt>length</tt> field,
     * and so on.
     *
     * <p> Writing a packet does not do any integrity checking on
     * the packet aside from checking the packet length. Checking
     * the packet length requires checking that the value of the
     * <tt>length</tt> field (as indicated by the first four bytes
     * of the packet) is 11 or greater. Consequently the length of
     * the byte array provided to this method, that is
     * <tt>pkt.length</tt>, must be 11 or more, and must be equal
     * or greater than the value of the <tt>length</tt> field. If the
     * length of the byte array is greater than the value of
     * the <tt>length</tt> field then all bytes from element
     * <tt>pkt[length]</tt> onwards are ignored. In other words,
     * any additional bytes that follow the packet in the byte
     * array are ignored and will not be transmitted to the target
     * VM.
     *
     * <p> A write operation may block or may complete immediately.
     * The exact circumstances when an operation blocks depends on
     * the transport service. In the case of a TCP/IP connection to
     * the target VM, the writePacket method may block if there is
     * network congestion or there is insufficient space to buffer
     * the packet in the underlying network system.
     *
     * <p> This method may be invoked at any time.  If another thread has
     * already initiated a write operation upon this Connection then
     * a subsequent invocation of this method will block until the first
     * operation is complete. </p>
     *
     * @param   pkt
     *          The packet to write to the target VM.
     *
     * @throws  ClosedConnectionException
     *          If the connection is closed, or another thread closes
     *          the connection while the write operation is in progress.
     *
     * @throws  java.io.IOException
     *          If an I/O error occurs.
     *
     * @throws  IllegalArgumentException
     *          If the value of the <tt>length</tt> field is invalid,
     *          or the byte array is of insufficient length.
     */
    public abstract void writePacket(byte pkt[]) throws IOException;

    
Closes this connection.

 If the connection is already closed then invoking this method has no effect. After a connection is closed, any further attempt calls to readPacket or 
writePacket will throw a ClosedConnectionException. 
 Any thread currently blocked in an I/O operation (readPacket or writePacket) will throw a ClosedConnectionException). 
 This method may be invoked at any time.  If some other thread has
already invoked it, however, then another invocation will block until
the first invocation is complete, after which it will return without
effect. 


Throws:
/**
     * Closes this connection.
     *
     * <p> If the connection is already closed then invoking this method
     * has no effect. After a connection is closed, any further attempt
     * calls to {@link #readPacket readPacket} or {@link #writePacket
     * writePacket} will throw a {@link ClosedConnectionException}.
     *
     * <p> Any thread currently blocked in an I/O operation ({@link
     * #readPacket readPacket} or {@link #writePacket writePacket})
     * will throw a {@link ClosedConnectionException}).
     *
     * <p> This method may be invoked at any time.  If some other thread has
     * already invoked it, however, then another invocation will block until
     * the first invocation is complete, after which it will return without
     * effect. </p>
     *
     * @throws  java.io.IOException
     *          If an I/O error occurs
     */
    public abstract void close() throws IOException;

    
Tells whether or not this connection is open.  


Returns:true if, and only if, this connection is open
/**
     * Tells whether or not this connection is open.  </p>
     *
     * @return <tt>true</tt> if, and only if, this connection is open
     */
    public abstract boolean isOpen();
}