/*
 * reserved comment block
 * DO NOT REMOVE OR ALTER!
 */
/*
 * Licensed to the Apache Software Foundation (ASF) under one or more
 * contributor license agreements.  See the NOTICE file distributed with
 * this work for additional information regarding copyright ownership.
 * The ASF licenses this file to You under the Apache License, Version 2.0
 * (the "License"); you may not use this file except in compliance with
 * the License.  You may obtain a copy of the License at
 *
 *      http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */

package com.sun.org.apache.xerces.internal.impl.dtd;

ContentSpec really exists to aid the parser classes in implementing access to the grammar.

This class is used by the DTD scanner and the validator classes, allowing them to be used separately or together. This "struct" class is used to build content models for validation, where it is more efficient to fetch all of the information for each of these content model "fragments" than to fetch each field one at a time. Since configurations are allowed to have validators without a DTD scanner (i.e. a schema validator) and a DTD scanner without a validator (non-validating processor), this class can be used by each without requiring the presence of the other.

When processing element declarations, the DTD scanner will build up a representation of the content model using the node types that are defined here. Since a non-validating processor only needs to remember the type of content model declared (i.e. ANY, EMPTY, MIXED, or CHILDREN), it is free to discard the specific details of the MIXED and CHILDREN content models described using this class.

In the typical case of a validating processor reading the grammar of the document from a DTD, the information about the content model declared will be preserved and later "compiled" into an efficient form for use during element validation. Each content spec node that is saved is assigned a unique index that is used as a handle for the "value" or "otherValue" fields of other content spec nodes. A leaf node has a "value" that is either an index in the string pool of the element type of that leaf, or a value of -1 to indicate the special "#PCDATA" leaf type used in a mixed content model.

For a mixed content model, the content spec will be made up of leaf and choice content spec nodes, with an optional "zero or more" node. For example, the mixed content declaration "(#PCDATA)" would contain a single leaf node with a node value of -1. A mixed content declaration of "(#PCDATA|foo)*" would have a content spec consisting of two leaf nodes, for the "#PCDATA" and "foo" choices, a choice node with the "value" set to the index of the "#PCDATA" leaf node and the "otherValue" set to the index of the "foo" leaf node, and a "zero or more" node with the "value" set to the index of the choice node. If the content model has more choices, for example "(#PCDATA|a|b)*", then there will be more corresponding choice and leaf nodes, the choice nodes will be chained together through the "value" field with each leaf node referenced by the "otherValue" field.

For element content models, there are sequence nodes and also "zero or one" and "one or more" nodes. The leaf nodes would always have a valid string pool index, as the "#PCDATA" leaf is not used in the declarations for element content models.

@xerces.internal
/** * ContentSpec really exists to aid the parser classes in implementing * access to the grammar. * <p> * This class is used by the DTD scanner and the validator classes, * allowing them to be used separately or together. This "struct" * class is used to build content models for validation, where it * is more efficient to fetch all of the information for each of * these content model "fragments" than to fetch each field one at * a time. Since configurations are allowed to have validators * without a DTD scanner (i.e. a schema validator) and a DTD scanner * without a validator (non-validating processor), this class can be * used by each without requiring the presence of the other. * <p> * When processing element declarations, the DTD scanner will build * up a representation of the content model using the node types that * are defined here. Since a non-validating processor only needs to * remember the type of content model declared (i.e. ANY, EMPTY, MIXED, * or CHILDREN), it is free to discard the specific details of the * MIXED and CHILDREN content models described using this class. * <p> * In the typical case of a validating processor reading the grammar * of the document from a DTD, the information about the content model * declared will be preserved and later "compiled" into an efficient * form for use during element validation. Each content spec node * that is saved is assigned a unique index that is used as a handle * for the "value" or "otherValue" fields of other content spec nodes. * A leaf node has a "value" that is either an index in the string * pool of the element type of that leaf, or a value of -1 to indicate * the special "#PCDATA" leaf type used in a mixed content model. * <p> * For a mixed content model, the content spec will be made up of * leaf and choice content spec nodes, with an optional "zero or more" * node. For example, the mixed content declaration "(#PCDATA)" would * contain a single leaf node with a node value of -1. A mixed content * declaration of "(#PCDATA|foo)*" would have a content spec consisting * of two leaf nodes, for the "#PCDATA" and "foo" choices, a choice node * with the "value" set to the index of the "#PCDATA" leaf node and the * "otherValue" set to the index of the "foo" leaf node, and a "zero or * more" node with the "value" set to the index of the choice node. If * the content model has more choices, for example "(#PCDATA|a|b)*", then * there will be more corresponding choice and leaf nodes, the choice * nodes will be chained together through the "value" field with each * leaf node referenced by the "otherValue" field. * <p> * For element content models, there are sequence nodes and also "zero or * one" and "one or more" nodes. The leaf nodes would always have a valid * string pool index, as the "#PCDATA" leaf is not used in the declarations * for element content models. * * @xerces.internal * */
public class XMLContentSpec { // // Constants //
Name or #PCDATA. Leaf nodes that represent parsed character data (#PCDATA) have values of -1.
/** * Name or #PCDATA. Leaf nodes that represent parsed character * data (#PCDATA) have values of -1. */
public static final short CONTENTSPECNODE_LEAF = 0;
Represents a zero or one occurence count, '?'.
/** Represents a zero or one occurence count, '?'. */
public static final short CONTENTSPECNODE_ZERO_OR_ONE = 1;
Represents a zero or more occurence count, '*'.
/** Represents a zero or more occurence count, '*'. */
public static final short CONTENTSPECNODE_ZERO_OR_MORE = 2;
Represents a one or more occurence count, '+'.
/** Represents a one or more occurence count, '+'. */
public static final short CONTENTSPECNODE_ONE_OR_MORE = 3;
Represents choice, '|'.
/** Represents choice, '|'. */
public static final short CONTENTSPECNODE_CHOICE = 4;
Represents sequence, ','.
/** Represents sequence, ','. */
public static final short CONTENTSPECNODE_SEQ = 5;
Represents any namespace specified namespace. When the element found in the document must belong to a specific namespace, otherValue will contain the name of the namespace. If otherValue is -1 then the element can be from any namespace.

Lists of valid namespaces are created from choice content spec nodes that have any content spec nodes as children.

/** * Represents any namespace specified namespace. When the element * found in the document must belong to a specific namespace, * <code>otherValue</code> will contain the name of the namespace. * If <code>otherValue</code> is <code>-1</code> then the element * can be from any namespace. * <p> * Lists of valid namespaces are created from choice content spec * nodes that have any content spec nodes as children. */
public static final short CONTENTSPECNODE_ANY = 6;
Represents any other namespace (XML Schema: ##other).

When the content spec node type is set to CONTENTSPECNODE_ANY_OTHER, value will contain the namespace that cannot occur.

/** * Represents any other namespace (XML Schema: ##other). * <p> * When the content spec node type is set to CONTENTSPECNODE_ANY_OTHER, * <code>value</code> will contain the namespace that <em>cannot</em> * occur. */
public static final short CONTENTSPECNODE_ANY_OTHER = 7;
Represents any local element (XML Schema: ##local).
/** Represents any local element (XML Schema: ##local). */
public static final short CONTENTSPECNODE_ANY_LOCAL = 8;
prcessContent is 'lax'
/** prcessContent is 'lax' **/
public static final short CONTENTSPECNODE_ANY_LAX = 22; public static final short CONTENTSPECNODE_ANY_OTHER_LAX = 23; public static final short CONTENTSPECNODE_ANY_LOCAL_LAX = 24;
processContent is 'skip'
/** processContent is 'skip' **/
public static final short CONTENTSPECNODE_ANY_SKIP = 38; public static final short CONTENTSPECNODE_ANY_OTHER_SKIP = 39; public static final short CONTENTSPECNODE_ANY_LOCAL_SKIP = 40; // // Data //
The content spec node type.
See Also:
/** * The content spec node type. * * @see #CONTENTSPECNODE_LEAF * @see #CONTENTSPECNODE_ZERO_OR_ONE * @see #CONTENTSPECNODE_ZERO_OR_MORE * @see #CONTENTSPECNODE_ONE_OR_MORE * @see #CONTENTSPECNODE_CHOICE * @see #CONTENTSPECNODE_SEQ */
public short type;
The "left hand" value object of the content spec node. leaf name.localpart, single child for unary ops, left child for binary ops.
/** * The "left hand" value object of the content spec node. * leaf name.localpart, single child for unary ops, left child for binary ops. */
public Object value;
The "right hand" value of the content spec node. leaf name.uri, right child for binary ops
/** * The "right hand" value of the content spec node. * leaf name.uri, right child for binary ops */
public Object otherValue; // // Constructors //
Default constructor.
/** Default constructor. */
public XMLContentSpec() { clear(); }
Constructs a content spec with the specified values.
/** Constructs a content spec with the specified values. */
public XMLContentSpec(short type, Object value, Object otherValue) { setValues(type, value, otherValue); }
Constructs a content spec from the values in the specified content spec.
/** * Constructs a content spec from the values in the specified content spec. */
public XMLContentSpec(XMLContentSpec contentSpec) { setValues(contentSpec); }
Constructs a content spec from the values specified by the given content spec provider and identifier.
/** * Constructs a content spec from the values specified by the given * content spec provider and identifier. */
public XMLContentSpec(XMLContentSpec.Provider provider, int contentSpecIndex) { setValues(provider, contentSpecIndex); } // // Public methods //
Clears the values.
/** Clears the values. */
public void clear() { type = -1; value = null; otherValue = null; }
Sets the values.
/** Sets the values. */
public void setValues(short type, Object value, Object otherValue) { this.type = type; this.value = value; this.otherValue = otherValue; }
Sets the values of the specified content spec.
/** Sets the values of the specified content spec. */
public void setValues(XMLContentSpec contentSpec) { type = contentSpec.type; value = contentSpec.value; otherValue = contentSpec.otherValue; }
Sets the values from the values specified by the given content spec provider and identifier. If the specified content spec cannot be provided, the values of this content spec are cleared.
/** * Sets the values from the values specified by the given content spec * provider and identifier. If the specified content spec cannot be * provided, the values of this content spec are cleared. */
public void setValues(XMLContentSpec.Provider provider, int contentSpecIndex) { if (!provider.getContentSpec(contentSpecIndex, this)) { clear(); } } // // Object methods //
Returns a hash code for this node.
/** Returns a hash code for this node. */
public int hashCode() { return type << 16 | value.hashCode() << 8 | otherValue.hashCode(); }
Returns true if the two objects are equal.
/** Returns true if the two objects are equal. */
public boolean equals(Object object) { if (object != null && object instanceof XMLContentSpec) { XMLContentSpec contentSpec = (XMLContentSpec)object; return type == contentSpec.type && value == contentSpec.value && otherValue == contentSpec.otherValue; } return false; } // // Interfaces //
Provides a means for walking the structure built out of content spec "nodes". The user of this provider interface is responsible for knowing what the content spec node values "mean". If those values refer to content spec identifiers, then the user can call back into the provider to get the next content spec node in the structure.
@xerces.internal
/** * Provides a means for walking the structure built out of * content spec "nodes". The user of this provider interface is * responsible for knowing what the content spec node values * "mean". If those values refer to content spec identifiers, * then the user can call back into the provider to get the * next content spec node in the structure. * * @xerces.internal */
public interface Provider { // // XMLContentSpec.Provider methods //
Fills in the provided content spec structure with content spec information for a unique identifier.
Params:
  • contentSpecIndex – The content spec identifier. All content spec "nodes" have a unique identifier.
  • contentSpec – The content spec struct to fill in with the information.
Returns:Returns true if the contentSpecIndex was found.
/** * Fills in the provided content spec structure with content spec * information for a unique identifier. * * @param contentSpecIndex The content spec identifier. All content * spec "nodes" have a unique identifier. * @param contentSpec The content spec struct to fill in with * the information. * * @return Returns true if the contentSpecIndex was found. */
public boolean getContentSpec(int contentSpecIndex, XMLContentSpec contentSpec); } // interface Provider } // class XMLContentSpec