https://openjdk.java.net/ 
/*
 * Copyright (c) 2000, 2019, Oracle and/or its affiliates. All rights reserved.
 * DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
 *
 * This code is free software; you can redistribute it and/or modify it
 * under the terms of the GNU General Public License version 2 only, as
 * published by the Free Software Foundation.  Oracle designates this
 * particular file as subject to the "Classpath" exception as provided
 * by Oracle in the LICENSE file that accompanied this code.
 *
 * This code is distributed in the hope that it will be useful, but WITHOUT
 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
 * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
 * version 2 for more details (a copy is included in the LICENSE file that
 * accompanied this code).
 *
 * You should have received a copy of the GNU General Public License version
 * 2 along with this work; if not, write to the Free Software Foundation,
 * Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.
 *
 * Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA
 * or visit www.oracle.com if you need additional information or have any
 * questions.
 */

package javax.print.attribute.standard;

import javax.print.attribute.Attribute;
import javax.print.attribute.DocAttribute;
import javax.print.attribute.EnumSyntax;
import javax.print.attribute.PrintJobAttribute;
import javax.print.attribute.PrintRequestAttribute;


Class Finishings is a printing attribute class, an enumeration, that identifies whether the printer applies a finishing operation of some kind of binding to each copy of each printed document in the job. For multidoc print jobs (jobs with multiple documents), the MultipleDocumentHandling attribute determines what constitutes a "copy" for purposes of finishing. 

Standard Finishings values are:



 The following Finishings values are more specific; they indicate a corner or an edge as if the document were a portrait document: 



The STAPLE_XXX values are specified with respect to the document as if the document were a portrait document. If the document is actually a landscape or a reverse-landscape document, the client supplies the appropriate transformed value. For example, to position a staple in the upper left hand corner of a landscape document when held for reading, the client supplies the STAPLE_BOTTOM_LEFT value (since landscape is defined as a +90 degree rotation from portrait, i.e., anti-clockwise). On the other hand, to position a staple in the upper left hand corner of a reverse-landscape document when held for reading, the client supplies the STAPLE_TOP_RIGHT value (since reverse-landscape is defined as a -90 degree rotation from portrait, i.e., clockwise). 

The angle (vertical, horizontal, angled) of each staple with respect to the
document depends on the implementation which may in turn depend on the value
of the attribute.

 The effect of a Finishings attribute on a multidoc print job (a job with multiple documents) depends on whether all the docs have the same binding specified or whether different docs have different bindings specified, and on the (perhaps defaulted) value of the MultipleDocumentHandling attribute. 
    
  
  • If all the docs have the same binding specified, then any value of MultipleDocumentHandling makes sense, and the printer's processing depends on the MultipleDocumentHandling value: 
      
    
    • SINGLE_DOCUMENT -- All the input docs will be bound together as one output document with the specified binding. 
    • SINGLE_DOCUMENT_NEW_SHEET -- All the input docs will be bound together as one output document with the specified binding, and the first impression of each input doc will always start on a new media sheet. 
    • SEPARATE_DOCUMENTS_UNCOLLATED_COPIES -- Each input doc will be bound separately with the specified binding. 
    • SEPARATE_DOCUMENTS_COLLATED_COPIES -- Each input doc will be bound separately with the specified binding. 
    
  
  • If different docs have different bindings specified, then only two values of MultipleDocumentHandling make sense, and the printer reports an error when the job is submitted if any other value is specified: 
      
    
    • SEPARATE_DOCUMENTS_UNCOLLATED_COPIES -- Each input doc will be bound separately with its own specified binding. 
    • SEPARATE_DOCUMENTS_COLLATED_COPIES -- Each input doc will be bound separately with its own specified binding. 
    




IPP Compatibility: Class Finishings encapsulates some of the IPP enum values that can be included in an IPP "finishings" attribute, which is a set of enums. The category name returned by getName() is the IPP attribute name. The enumeration's integer value is the IPP enum value. The toString() method returns the IPP string representation of the attribute value. In IPP Finishings is a multi-value attribute, this API currently allows only one binding to be specified. 
Author:Alan Kaminsky
/**
 * Class {@code Finishings} is a printing attribute class, an enumeration, that
 * identifies whether the printer applies a finishing operation of some kind of
 * binding to each copy of each printed document in the job. For multidoc print
 * jobs (jobs with multiple documents), the
 * {@link MultipleDocumentHandling MultipleDocumentHandling} attribute
 * determines what constitutes a "copy" for purposes of finishing.
 * <p>
 * Standard Finishings values are:
 * <ul>
 *   <li>{@link #NONE NONE}
 *   <li>{@link #STAPLE STAPLE}
 *   <li>{@link #EDGE_STITCH EDGE_STITCH}
 *   <li>{@link #BIND BIND}
 *   <li>{@link #SADDLE_STITCH SADDLE_STITCH}
 *   <li>{@link #COVER COVER}
 * </ul>
 * <p>
 * The following {@code Finishings} values are more specific; they indicate a
 * corner or an edge as if the document were a portrait document:
 * <ul>
 *   <li>{@link #STAPLE_TOP_LEFT STAPLE_TOP_LEFT}
 *   <li>{@link #EDGE_STITCH_LEFT EDGE_STITCH_LEFT}
 *   <li>{@link #STAPLE_DUAL_LEFT STAPLE_DUAL_LEFT}
 *   <li>{@link #STAPLE_BOTTOM_LEFT STAPLE_BOTTOM_LEFT}
 *   <li>{@link #EDGE_STITCH_TOP EDGE_STITCH_TOP}
 *   <li>{@link #STAPLE_DUAL_TOP STAPLE_DUAL_TOP}
 *   <li>{@link #STAPLE_TOP_RIGHT STAPLE_TOP_RIGHT}
 *   <li>{@link #EDGE_STITCH_RIGHT EDGE_STITCH_RIGHT}
 *   <li>{@link #STAPLE_DUAL_RIGHT STAPLE_DUAL_RIGHT}
 *   <li>{@link #STAPLE_BOTTOM_RIGHT STAPLE_BOTTOM_RIGHT}
 *   <li>{@link #EDGE_STITCH_BOTTOM EDGE_STITCH_BOTTOM}
 *   <li>{@link #STAPLE_DUAL_BOTTOM STAPLE_DUAL_BOTTOM}
 * </ul>
 * <p>
 * The STAPLE_<i>XXX</i> values are specified with respect to the document as if
 * the document were a portrait document. If the document is actually a
 * landscape or a reverse-landscape document, the client supplies the
 * appropriate transformed value. For example, to position a staple in the upper
 * left hand corner of a landscape document when held for reading, the client
 * supplies the {@code STAPLE_BOTTOM_LEFT} value (since landscape is defined as
 * a +90 degree rotation from portrait, i.e., anti-clockwise). On the other
 * hand, to position a staple in the upper left hand corner of a
 * reverse-landscape document when held for reading, the client supplies the
 * {@code STAPLE_TOP_RIGHT} value (since reverse-landscape is defined as a -90
 * degree rotation from portrait, i.e., clockwise).
 * <p>
 * The angle (vertical, horizontal, angled) of each staple with respect to the
 * document depends on the implementation which may in turn depend on the value
 * of the attribute.
 * <p>
 * The effect of a {@code Finishings} attribute on a multidoc print job (a job
 * with multiple documents) depends on whether all the docs have the same
 * binding specified or whether different docs have different bindings
 * specified, and on the (perhaps defaulted) value of the
 * {@link MultipleDocumentHandling MultipleDocumentHandling} attribute.
 * <ul>
 *   <li>If all the docs have the same binding specified, then any value of
 *   {@link MultipleDocumentHandling MultipleDocumentHandling} makes sense, and
 *   the printer's processing depends on the
 *   {@link MultipleDocumentHandling MultipleDocumentHandling} value:
 *   <ul>
 *     <li>{@code SINGLE_DOCUMENT} -- All the input docs will be bound together
 *     as one output document with the specified binding.
 *     <li>{@code SINGLE_DOCUMENT_NEW_SHEET} -- All the input docs will be bound
 *     together as one output document with the specified binding, and the first
 *     impression of each input doc will always start on a new media sheet.
 *     <li>{@code SEPARATE_DOCUMENTS_UNCOLLATED_COPIES} -- Each input doc will
 *     be bound separately with the specified binding.
 *     <li>{@code SEPARATE_DOCUMENTS_COLLATED_COPIES} -- Each input doc will be
 *     bound separately with the specified binding.
 *   </ul>
 *   <li>If different docs have different bindings specified, then only two
 *   values of {@link MultipleDocumentHandling MultipleDocumentHandling} make
 *   sense, and the printer reports an error when the job is submitted if any
 *   other value is specified:
 *   <ul>
 *     <li>{@code SEPARATE_DOCUMENTS_UNCOLLATED_COPIES} -- Each input doc will
 *     be bound separately with its own specified binding.
 *     <li>{@code SEPARATE_DOCUMENTS_COLLATED_COPIES} -- Each input doc will be
 *     bound separately with its own specified binding.
 *   </ul>
 * </ul>
 * <p>
 * <b>IPP Compatibility:</b> Class Finishings encapsulates some of the IPP enum
 * values that can be included in an IPP "finishings" attribute, which is a set
 * of enums. The category name returned by {@code getName()} is the IPP
 * attribute name. The enumeration's integer value is the IPP enum value. The
 * {@code toString()} method returns the IPP string representation of the
 * attribute value. In IPP Finishings is a multi-value attribute, this API
 * currently allows only one binding to be specified.
 *
 * @author Alan Kaminsky
 */
public class Finishings extends EnumSyntax
    implements DocAttribute, PrintRequestAttribute, PrintJobAttribute {

    
Use serialVersionUID from JDK 1.4 for interoperability.

/**
     * Use serialVersionUID from JDK 1.4 for interoperability.
     */
    private static final long serialVersionUID = -627840419548391754L;

    
Perform no binding.

/**
     * Perform no binding.
     */
    public static final Finishings NONE = new Finishings(3);

    
Bind the document(s) with one or more staples. The exact number and
placement of the staples is site-defined.

/**
     * Bind the document(s) with one or more staples. The exact number and
     * placement of the staples is site-defined.
     */
    public static final Finishings STAPLE = new Finishings(4);

    
This value is specified when it is desired to select a non-printed (or
pre-printed) cover for the document. This does not supplant the
specification of a printed cover (on cover stock medium) by the document
itself.

/**
     * This value is specified when it is desired to select a non-printed (or
     * pre-printed) cover for the document. This does not supplant the
     * specification of a printed cover (on cover stock medium) by the document
     * itself.
     */
    public static final Finishings COVER = new Finishings(6);

    
This value indicates that a binding is to be applied to the document; the
type and placement of the binding is site-defined.

/**
     * This value indicates that a binding is to be applied to the document; the
     * type and placement of the binding is site-defined.
     */
    public static final Finishings BIND = new Finishings(7);

    
Bind the document(s) with one or more staples (wire stitches) along the
middle fold. The exact number and placement of the staples and the middle
fold is implementation- and/or site-defined.

/**
     * Bind the document(s) with one or more staples (wire stitches) along the
     * middle fold. The exact number and placement of the staples and the middle
     * fold is implementation- and/or site-defined.
     */
    public static final Finishings SADDLE_STITCH =
        new Finishings(8);

    
Bind the document(s) with one or more staples (wire stitches) along one
edge. The exact number and placement of the staples is implementation-
and/or site- defined.

/**
     * Bind the document(s) with one or more staples (wire stitches) along one
     * edge. The exact number and placement of the staples is implementation-
     * and/or site- defined.
     */
    public static final Finishings EDGE_STITCH =
        new Finishings(9);

    
Bind the document(s) with one or more staples in the top left corner.

/**
     * Bind the document(s) with one or more staples in the top left corner.
     */
    public static final Finishings STAPLE_TOP_LEFT =
        new Finishings(20);

    
Bind the document(s) with one or more staples in the bottom left corner.

/**
     * Bind the document(s) with one or more staples in the bottom left corner.
     */
    public static final Finishings STAPLE_BOTTOM_LEFT =
        new Finishings(21);

    
Bind the document(s) with one or more staples in the top right corner.

/**
     * Bind the document(s) with one or more staples in the top right corner.
     */
    public static final Finishings STAPLE_TOP_RIGHT =
        new Finishings(22);

    
Bind the document(s) with one or more staples in the bottom right corner.

/**
     * Bind the document(s) with one or more staples in the bottom right corner.
     */
    public static final Finishings STAPLE_BOTTOM_RIGHT =
        new Finishings(23);

    
Bind the document(s) with one or more staples (wire stitches) along the
left edge. The exact number and placement of the staples is
implementation- and/or site-defined.

/**
     * Bind the document(s) with one or more staples (wire stitches) along the
     * left edge. The exact number and placement of the staples is
     * implementation- and/or site-defined.
     */
    public static final Finishings EDGE_STITCH_LEFT =
        new Finishings(24);

    
Bind the document(s) with one or more staples (wire stitches) along the
top edge. The exact number and placement of the staples is
implementation- and/or site-defined.

/**
     * Bind the document(s) with one or more staples (wire stitches) along the
     * top edge. The exact number and placement of the staples is
     * implementation- and/or site-defined.
     */
    public static final Finishings EDGE_STITCH_TOP =
        new Finishings(25);

    
Bind the document(s) with one or more staples (wire stitches) along the
right edge. The exact number and placement of the staples is
implementation- and/or site-defined.

/**
     * Bind the document(s) with one or more staples (wire stitches) along the
     * right edge. The exact number and placement of the staples is
     * implementation- and/or site-defined.
     */
    public static final Finishings EDGE_STITCH_RIGHT =
        new Finishings(26);

    
Bind the document(s) with one or more staples (wire stitches) along the
bottom edge. The exact number and placement of the staples is
implementation- and/or site-defined.

/**
     * Bind the document(s) with one or more staples (wire stitches) along the
     * bottom edge. The exact number and placement of the staples is
     * implementation- and/or site-defined.
     */
    public static final Finishings EDGE_STITCH_BOTTOM =
        new Finishings(27);

    
Bind the document(s) with two staples (wire stitches) along the left edge
assuming a portrait document (see above).

/**
     * Bind the document(s) with two staples (wire stitches) along the left edge
     * assuming a portrait document (see above).
     */
    public static final Finishings STAPLE_DUAL_LEFT =
        new Finishings(28);

    
Bind the document(s) with two staples (wire stitches) along the top edge
assuming a portrait document (see above).

/**
     * Bind the document(s) with two staples (wire stitches) along the top edge
     * assuming a portrait document (see above).
     */
    public static final Finishings STAPLE_DUAL_TOP =
        new Finishings(29);

    
Bind the document(s) with two staples (wire stitches) along the right
edge assuming a portrait document (see above).

/**
     * Bind the document(s) with two staples (wire stitches) along the right
     * edge assuming a portrait document (see above).
     */
    public static final Finishings STAPLE_DUAL_RIGHT =
        new Finishings(30);

    
Bind the document(s) with two staples (wire stitches) along the bottom
edge assuming a portrait document (see above).

/**
     * Bind the document(s) with two staples (wire stitches) along the bottom
     * edge assuming a portrait document (see above).
     */
    public static final Finishings STAPLE_DUAL_BOTTOM =
        new Finishings(31);

    
Construct a new finishings binding enumeration value with the given
integer value.

Params:
  • value – Integer value
/**
     * Construct a new finishings binding enumeration value with the given
     * integer value.
     *
     * @param  value Integer value
     */
    protected Finishings(int value) {
        super(value);
    }

    
The string table for class Finishings. 
/**
     * The string table for class {@code Finishings}.
     */
    private static final String[] myStringTable =
                {"none",
                 "staple",
                 null,
                 "cover",
                 "bind",
                 "saddle-stitch",
                 "edge-stitch",
                 null, // The next ten enum values are reserved.
                 null,
                 null,
                 null,
                 null,
                 null,
                 null,
                 null,
                 null,
                 null,
                 "staple-top-left",
                 "staple-bottom-left",
                 "staple-top-right",
                 "staple-bottom-right",
                 "edge-stitch-left",
                 "edge-stitch-top",
                 "edge-stitch-right",
                 "edge-stitch-bottom",
                 "staple-dual-left",
                 "staple-dual-top",
                 "staple-dual-right",
                 "staple-dual-bottom"
                };

    
The enumeration value table for class Finishings. 
/**
     * The enumeration value table for class {@code Finishings}.
     */
    private static final Finishings[] myEnumValueTable =
                {NONE,
                 STAPLE,
                 null,
                 COVER,
                 BIND,
                 SADDLE_STITCH,
                 EDGE_STITCH,
                 null, // The next ten enum values are reserved.
                 null,
                 null,
                 null,
                 null,
                 null,
                 null,
                 null,
                 null,
                 null,
                 STAPLE_TOP_LEFT,
                 STAPLE_BOTTOM_LEFT,
                 STAPLE_TOP_RIGHT,
                 STAPLE_BOTTOM_RIGHT,
                 EDGE_STITCH_LEFT,
                 EDGE_STITCH_TOP,
                 EDGE_STITCH_RIGHT,
                 EDGE_STITCH_BOTTOM,
                 STAPLE_DUAL_LEFT,
                 STAPLE_DUAL_TOP,
                 STAPLE_DUAL_RIGHT,
                 STAPLE_DUAL_BOTTOM
                };

    
Returns the string table for class Finishings. 
/**
     * Returns the string table for class {@code Finishings}.
     */
    protected String[] getStringTable() {
        return myStringTable.clone();
    }

    
Returns the enumeration value table for class Finishings. 
/**
     * Returns the enumeration value table for class {@code Finishings}.
     */
    protected EnumSyntax[] getEnumValueTable() {
        return (EnumSyntax[])myEnumValueTable.clone();
    }

    
Returns the lowest integer value used by class Finishings. 
/**
     * Returns the lowest integer value used by class {@code Finishings}.
     */
    protected int getOffset() {
        return 3;
    }

    
Get the printing attribute class which is to be used as the "category"
for this printing attribute value.

 For class Finishings and any vendor-defined subclasses, the category is class Finishings itself. 
Returns:printing attribute class (category), an instance of class java.lang.Class
/**
     * Get the printing attribute class which is to be used as the "category"
     * for this printing attribute value.
     * <p>
     * For class {@code Finishings} and any vendor-defined subclasses, the
     * category is class {@code Finishings} itself.
     *
     * @return printing attribute class (category), an instance of class
     *         {@link Class java.lang.Class}
     */
    public final Class<? extends Attribute> getCategory() {
        return Finishings.class;
    }

    
Get the name of the category of which this attribute value is an
instance.

 For class Finishings and any vendor-defined subclasses, the category name is "finishings". 
Returns:attribute category name
/**
     * Get the name of the category of which this attribute value is an
     * instance.
     * <p>
     * For class {@code Finishings} and any vendor-defined subclasses, the
     * category name is {@code "finishings"}.
     *
     * @return attribute category name
     */
    public final String getName() {
        return "finishings";
    }
}