java/12 : java.sql.rowset/javax/sql/rowset/spi/package-info.java

javax.sql.rowset.spi
https://openjdk.java.net/
GPLv2 + Classpath Exception
/*
 * Copyright (c)  2003, 2018, Oracle and/or its affiliates. All rights reserved.
 * DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
 *
 * This code is free software; you can redistribute it and/or modify it
 * under the terms of the GNU General Public License version 2 only, as
 * published by the Free Software Foundation.  Oracle designates this
 * particular file as subject to the "Classpath" exception as provided
 * by Oracle in the LICENSE file that accompanied this code.
 *
 * This code is distributed in the hope that it will be useful, but WITHOUT
 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
 * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
 * version 2 for more details (a copy is included in the LICENSE file that
 * accompanied this code).
 *
 * You should have received a copy of the GNU General Public License version
 * 2 along with this work; if not, write to the Free Software Foundation,
 * Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.
 *
 * Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA
 * or visit www.oracle.com if you need additional information or have any
 * questions.
 */

The standard classes and interfaces that a third party vendor has to
use in its implementation of a synchronization provider. These classes and
interfaces are referred to as the Service Provider Interface (SPI).  To make it possible
for a RowSet object to use an implementation, the vendor must register
it with the SyncFactory singleton. (See the class comment for
SyncProvider for a full explanation of the registration process and
the naming convention to be used.)
Table of Contents

1.0 Package Specification
2.0 Service Provider Architecture
3.0 Implementer's Guide
4.0 Resolving Synchronization Conflicts
5.0 Related Specifications
6.0 Related Documentation

1.0 Package Specification

The following classes and interfaces make up the javax.sql.rowset.spi
package:

 SyncFactory
 
SyncProvider
 
SyncFactoryException
 
SyncProviderException
 
SyncResolver
 
XmlReader
 
XmlWriter
 
TransactionalWriter

The following interfaces, in the javax.sql package, are also part of the SPI:

 RowSetReader
 
RowSetWriter


A SyncProvider implementation provides a disconnected RowSet
object with the mechanisms for reading data into it and for writing data that has been
modified in it
back to the underlying data source.  A reader, a RowSetReader or
XMLReader object, reads data into a RowSet object when the
CachedRowSet methods execute or populate
are called.  A writer, a RowSetWriter or XMLWriter
object, writes changes back to the underlying data source when the
CachedRowSet method acceptChanges is called.

The process of writing changes in a RowSet object to its data source
is known as synchronization.  The SyncProvider implementation that a
RowSet object is using determines the level of synchronization that the
RowSet object's writer uses. The various levels of synchronization are
referred to as grades.

The lower grades of synchronization are
known as optimistic concurrency levels because they optimistically
assume that there will be no conflicts or very few conflicts.  A conflict exists when
the same data modified in the RowSet object has also been modified
in the data source. Using the optimistic concurrency model means that if there
is a conflict, modifications to either the data source or the RowSet
object will be lost.

Higher grades of synchronization are called pessimistic because they assume
that others will be accessing the data source and making modifications.  These
grades set varying levels of locks to increase the chances that no conflicts
occur.

The lowest level of synchronization is simply writing any changes made to the
RowSet object to its underlying data source.  The writer does
nothing to check for conflicts.
If there is a conflict and the data
source values are overwritten, the changes other parties have made by to the data
source are lost.

The RIXMLProvider implementation uses the lowest level
of synchronization and just writes RowSet changes to the data source.

For the next level up, the
writer checks to see if there are any conflicts, and if there are,
it does not write anything to the data source.  The problem with this concurrency
level is that if another party has modified the corresponding data in the data source
since the RowSet object got its data,
the changes made to the RowSet object are lost. The
RIOptimisticProvider implementation uses this level of synchronization.

At higher levels of synchronization, referred to as pessimistic concurrency,
the writer take steps to avoid conflicts by setting locks. Setting locks
can vary from setting a lock on a single row to setting a lock on a table
or the entire data source. The level of synchronization is therefore a tradeoff
between the ability of users to access the data source concurrently and the  ability
of the writer to keep the data in the RowSet object and its data source
synchronized.

It is a requirement that all disconnected RowSet objects
(CachedRowSet, FilteredRowSet, JoinRowSet,
and WebRowSet objects) obtain their SyncProvider objects
from the SyncFactory mechanism.

The reference implementation (RI) provides two synchronization providers.
   

      RIOptimisticProvider 

           The default provider that the SyncFactory instance will
           supply to a disconnected RowSet object when no provider
           implementation is specified.

           This synchronization provider uses an optimistic concurrency model,
           assuming that there will be few conflicts among users
           who are accessing the same data in a database.  It avoids
           using locks; rather, it checks to see if there is a conflict
           before trying to synchronize the RowSet object and the
           data source. If there is a conflict, it does nothing, meaning that
           changes to the RowSet object are not persisted to the data
           source.
       
RIXMLProvider 

            A synchronization provider that can be used with a
            WebRowSet object, which is a rowset that can be written
            in XML format or read from XML format. The
            RIXMLProvider implementation does no checking at all for
            conflicts and simply writes any updated data in the
            WebRowSet object to the underlying data source.
            WebRowSet objects use this provider when they are
            dealing with XML data.
    
 These SyncProvider implementations
 are bundled with the reference implementation, which makes them always available to
 RowSet implementations.
 SyncProvider implementations make themselves available by being
 registered with the SyncFactory singleton.  When a RowSet
 object requests a provider, by specifying it in the constructor or as an argument to the
 CachedRowSet method setSyncProvider,
 the SyncFactory singleton
 checks to see if the requested provider has been registered with it.
 If it has, the SyncFactory creates an instance of it and passes it to the
 requesting RowSet object.
 If the SyncProvider implementation that is specified has not been registered,
 the SyncFactory singleton causes a SyncFactoryException object
 to be thrown.  If no provider is specified,
 the SyncFactory singleton will create an instance of the default
 provider implementation, RIOptimisticProvider,
 and pass it to the requesting RowSet object.

If a WebRowSet object does not specify a provider in its constructor, the
SyncFactory will give it an instance of RIOptimisticProvider.
However, the constructor for WebRowSet is implemented to set the provider
to the RIXMLProvider, which reads and writes a RowSet object
 in XML format.
 

See the SyncProvider class
 specification for further details.

Vendors may develop a SyncProvider implementation with any one of the possible
levels of synchronization, thus giving RowSet objects a choice of
synchronization mechanisms.
2.0 Service Provider Interface Architecture
2.1 Overview

The Service Provider Interface provides a pluggable mechanism by which
SyncProvider implementations can be registered and then generated when
required. The lazy reference mechanism employed by the SyncFactory limits
unnecessary resource consumption by not creating an instance until it is
required by a disconnected
RowSet object. The SyncFactory class also provides
a standard API to configure logging options and streams that may be provided
by a particular SyncProvider implementation.

2.2 Registering with the SyncFactory

A third party SyncProvider implementation must be registered with the
SyncFactory in order for a disconnected RowSet object
to obtain it and thereby use its javax.sql.RowSetReader and
javax.sql.RowSetWriter
implementations. The following registration mechanisms are available to all
SyncProvider implementations:

System properties - Properties set at the command line. These
properties are set at run time and apply system-wide per invocation of the Java
application. See the section "Related Documentation"
further related information.
Property Files - Properties specified in a standard property file.
This can be specified using a System Property or by modifying a standard
property file located in the platform run-time. The
reference implementation of this technology includes a standard property
file than can be edited to add additional SyncProvider objects.
JNDI Context - Available providers can be registered on a JNDI
context. The SyncFactory will attempt to load SyncProvider
objects bound to the context and register them with the factory. This
context must be supplied to the SyncFactory for the mechanism to
function correctly.


Details on how to specify the system properties or properties in a property file
and how to configure the JNDI Context are explained in detail in the
SyncFactory class description.

2.3 SyncFactory Provider Instance Generation Policies

The SyncFactory generates a requested SyncProvider
object if the provider has been correctly registered.  The
following policies are adhered to when either a disconnected RowSet object
is instantiated with a specified SyncProvider implementation or is
reconfigured at runtime with an alternative SyncProvider object.

 If a SyncProvider object is specified and the SyncFactory
contains no reference to the provider, a SyncFactoryException is
thrown.
 If a SyncProvider object is specified and the SyncFactory
contains a reference to the provider, the requested provider is supplied.
 If no SyncProvider object is specified, the reference
implementation provider RIOptimisticProvider is supplied.


These policies are explored in more detail in the 
SyncFactory class.
3.0 SyncProvider Implementer's Guide
3.1 Requirements

A compliant SyncProvider implementation that is fully pluggable
into the SyncFactory must extend and implement all
abstract methods in the SyncProvider
class. In addition, an implementation must determine the
grade, locking and updatable view capabilities defined in the
SyncProvider class definition. One or more of the
SyncProvider description criteria must be supported. It
is expected that vendor implementations will offer a range of grade, locking, and
updatable view capabilities.

Furthermore, the SyncProvider naming convention must be followed as
detailed in the SyncProvider class
description.

3.2 Grades

JSR 114 defines a set of grades to describe the quality of synchronization
a SyncProvider object can offer a disconnected RowSet
object. These grades are listed from the lowest quality of service to the highest.

GRADE_NONE - No synchronization with the originating data source is
provided. A SyncProvider implementation returning this grade will simply
attempt to write any data that has changed in the RowSet object to the
underlying data source, overwriting whatever is there. No attempt is made to compare
original values with current values to see if there is a conflict. The
RIXMLProvider is implemented with this grade.
GRADE_CHECK_MODIFIED_AT_COMMIT - A low grade of optimistic synchronization.
A SyncProvider implementation returning this grade
will check for conflicts in rows that have changed between the last synchronization
and the current synchronization under way. Any changes in the originating data source
that have been modified will not be reflected in the disconnected RowSet
object. If there are no conflicts, changes in the RowSet object will be
written to the data source. If there are conflicts, no changes are written.
The RIOptimisticProvider implementation uses this grade.
GRADE_CHECK_ALL_AT_COMMIT - A high grade of optimistic synchronization.
A SyncProvider implementation   returning this grade
will check all rows, including rows that have not changed in the disconnected
RowSet object. In this way, any changes to rows in the underlying
data source will be reflected in the disconnected RowSet object
when the synchronization finishes successfully.
GRADE_LOCK_WHEN_MODIFIED - A pessimistic grade of synchronization.
SyncProvider implementations returning this grade will lock
the row in the originating  data source that corresponds to the row being changed
in the RowSet object to reduce the possibility of other
processes modifying the same data in the data source.
GRADE_LOCK_WHEN_LOADED - A higher pessimistic synchronization grade.
A SyncProvider implementation returning this grade will lock
the entire view and/or  table affected by the original query used to
populate a RowSet object.


3.3 Locks

JSR 114 defines a set of constants that specify whether any locks have been
placed on a RowSet object's underlying data source and, if so,
on which constructs the locks are placed.  These locks will remain on the data
source while the RowSet object is disconnected from the data source.

These constants should be considered complementary to the
grade constants. The default setting for the majority of grade settings requires
that no data source locks remain when a RowSet object is disconnected
from its data source.
The grades GRADE_LOCK_WHEN_MODIFIED and
GRADE_LOCK_WHEN_LOADED allow a disconnected RowSet object
to have a fine-grained control over the degree of locking.

DATASOURCE_NO_LOCK - No locks remain on the originating data source.
This is the default lock setting for all SyncProvider implementations
unless otherwise directed by a RowSet object.
DATASOURCE_ROW_LOCK - A lock is placed on the rows that are touched by
the original SQL query used to populate the RowSet object.
DATASOURCE_TABLE_LOCK - A lock is placed on all tables that are touched
by the query that was used to populate the RowSet object.
DATASOURCE_DB_LOCK
A lock is placed on the entire data source that is used by the RowSet
object.


3.4 Updatable Views

A RowSet object may be populated with data from an SQL VIEW.
The following constants indicate whether a SyncProvider object can
update data in the table or tables from which the VIEW was derived.

UPDATABLE_VIEW_SYNC
Indicates that a SyncProvider implementation  supports synchronization
to the table or tables from which the SQL VIEW used to populate
a RowSet object is derived.
NONUPDATABLE_VIEW_SYNC
Indicates that a SyncProvider implementation  does not support
synchronization to the table or tables from which the SQL VIEW
used to populate  a RowSet object is derived.


3.5 Usage of SyncProvider Grading and Locking

In the example below, the reference CachedRowSetImpl implementation
reconfigures its current SyncProvider object by calling the
setSyncProvider method.

  CachedRowSetImpl crs = new CachedRowSetImpl();
  crs.setSyncProvider("com.foo.bar.HASyncProvider");

  An application can retrieve the SyncProvider object currently in use
by a disconnected RowSet object. It can also retrieve the
grade of synchronization with which the provider was implemented and the degree of
locking currently in use.  In addition, an application has the flexibility to set
the degree of locking to be used, which can increase the possibilities for successful
synchronization.  These operation are shown in the following code fragment.
  SyncProvider sync = crs.getSyncProvider();
  switch (sync.getProviderGrade()) {
  case: SyncProvider.GRADE_CHECK_ALL_AT_COMMIT
        //A high grade of optimistic synchronization
   break;
   case: SyncProvider.GRADE_CHECK_MODIFIED_AT_COMMIT
        //A low grade of optimistic synchronization
   break;
   case: SyncProvider.GRADE_LOCK_WHEN_LOADED
        // A pessimistic synchronization grade
   break;
   case: SyncProvider.GRADE_LOCK_WHEN_MODIFIED
        // A pessimistic synchronization grade
   break;
   case: SyncProvider.GRADE_NONE
     // No synchronization with the originating data source provided
   break;
   }
   switch (sync.getDataSourcLock() {
     case: SyncProvider.DATASOURCE_DB_LOCK
      // A lock is placed on the entire datasource that is used by the
      // RowSet object
      break;
     case: SyncProvider.DATASOURCE_NO_LOCK
      // No locks remain on the  originating data source.
     break;
     case: SyncProvider.DATASOURCE_ROW_LOCK
      // A lock is placed on the rows that are  touched by the original
      // SQL statement used to populate
      // the RowSet object that is using the SyncProvider
      break;
     case: DATASOURCE_TABLE_LOCK
      // A lock is placed on  all tables that are touched by the original
      // SQL statement used to populated
      // the RowSet object that is using the SyncProvider
     break;

   It is also possible using the static utility method in the
SyncFactory class to determine the list of SyncProvider
implementations currently registered with the SyncFactory.
      Enumeration e = SyncFactory.getRegisteredProviders();

4.0 Resolving Synchronization Conflicts
The interface SyncResolver provides a way for an application to
decide manually what to do when a conflict occurs. When the CachedRowSet
method acceptChanges finishes and has detected one or more conflicts,
it throws a SyncProviderException object.  An application can
catch the exception and
have it retrieve a SyncResolver object by calling the method
SyncProviderException.getSyncResolver().

A SyncResolver object, which is a special kind of
CachedRowSet object or
a JdbcRowSet object that has implemented the SyncResolver
interface,  examines the conflicts row by row. It is a duplicate of the
RowSet object being synchronized except that it contains only the data
from the data source this is causing a conflict. All of the other column values are
set to null. To navigate from one conflict value to another, a
SyncResolver object provides the methods nextConflict and
previousConflict.

The SyncResolver interface also
provides methods for doing the following:

 finding out whether the conflict involved an update, a delete, or an insert
 
getting the value in the data source that caused the conflict
 
setting the value that should be in the data source if it needs to be changed
     or setting the value that should be in the RowSet object if it needs
     to be changed


When the CachedRowSet method acceptChanges is called, it
delegates to the RowSet object's  SyncProvider object.
How the writer provided by that SyncProvider object is implemented
determines what level (grade) of checking for conflicts will be done.  After all
checking for conflicts is completed and one or more conflicts has been found, the method
acceptChanges throws a SyncProviderException object. The
application can catch the exception and use it to obtain a SyncResolver object.

The application can then use SyncResolver methods to get information
about each conflict and decide what to do.  If the application logic or the user
decides that a value in the RowSet object should be the one to
persist, the application or user can overwrite the data source value with it.

The comment for the SyncResolver interface has more detail.
5.0 Related Specifications

JNDI
Java Logging
APIs

6.0 Related Documentation

DataSource for JDBC
Connections

/**
 * The standard classes and interfaces that a third party vendor has to
 * use in its implementation of a synchronization provider. These classes and
 * interfaces are referred to as the Service Provider Interface (SPI).  To make it possible
 * for a <code>RowSet</code> object to use an implementation, the vendor must register
 * it with the <code>SyncFactory</code> singleton. (See the class comment for
 * <code>SyncProvider</code> for a full explanation of the registration process and
 * the naming convention to be used.)
 *
 * <h2>Table of Contents</h2>
 * <ul>
 * <li><a href="#pkgspec">1.0 Package Specification</a>
 * <li><a href="#arch">2.0 Service Provider Architecture</a>
 * <li><a href="#impl">3.0 Implementer's Guide</a>
 * <li><a href="#resolving">4.0 Resolving Synchronization Conflicts</a>
 * <li><a href="#relspec">5.0 Related Specifications</a>
 * <li><a href="#reldocs">6.0 Related Documentation</a>
 * </ul>
 *
 * <h3><a id="pkgspec">1.0 Package Specification</a></h3>
 * <P>
 * The following classes and interfaces make up the <code>javax.sql.rowset.spi</code>
 * package:
 * <UL>
 *  <LI><code>SyncFactory</code>
 *  <LI><code>SyncProvider</code>
 *  <LI><code>SyncFactoryException</code>
 *  <LI><code>SyncProviderException</code>
 *  <LI><code>SyncResolver</code>
 *  <LI><code>XmlReader</code>
 *  <LI><code>XmlWriter</code>
 *  <LI><code>TransactionalWriter</code>
 * </UL>
 * The following interfaces, in the <code>javax.sql</code> package, are also part of the SPI:
 * <UL>
 *  <LI><code>RowSetReader</code>
 *  <LI><code>RowSetWriter</code>
 * </UL>
 * <P>
 * A <code>SyncProvider</code> implementation provides a disconnected <code>RowSet</code>
 * object with the mechanisms for reading data into it and for writing data that has been
 * modified in it
 * back to the underlying data source.  A <i>reader</i>, a <code>RowSetReader</code> or
 * <code>XMLReader</code> object, reads data into a <code>RowSet</code> object when the
 * <code>CachedRowSet</code> methods <code>execute</code> or <code>populate</code>
 * are called.  A <i>writer</i>, a <code>RowSetWriter</code> or <code>XMLWriter</code>
 * object, writes changes back to the underlying data source when the
 * <code>CachedRowSet</code> method <code>acceptChanges</code> is called.
 * <P>
 * The process of writing changes in a <code>RowSet</code> object to its data source
 * is known as <i>synchronization</i>.  The <code>SyncProvider</code> implementation that a
 * <code>RowSet</code> object is using determines the level of synchronization that the
 * <code>RowSet</code> object's writer uses. The various levels of synchronization are
 * referred to as <i>grades</i>.
 * <P>
 * The lower grades of synchronization are
 * known as <i>optimistic</i> concurrency levels because they optimistically
 * assume that there will be no conflicts or very few conflicts.  A conflict exists when
 * the same data modified in the <code>RowSet</code> object has also been modified
 * in the data source. Using the optimistic concurrency model means that if there
 * is a conflict, modifications to either the data source or the <code>RowSet</code>
 * object will be lost.
 * <P>
 * Higher grades of synchronization are called <i>pessimistic</i> because they assume
 * that others will be accessing the data source and making modifications.  These
 * grades set varying levels of locks to increase the chances that no conflicts
 * occur.
 * <P>
 * The lowest level of synchronization is simply writing any changes made to the
 * <code>RowSet</code> object to its underlying data source.  The writer does
 * nothing to check for conflicts.
 * If there is a conflict and the data
 * source values are overwritten, the changes other parties have made by to the data
 * source are lost.
 * <P>
 * The <code>RIXMLProvider</code> implementation uses the lowest level
 * of synchronization and just writes <code>RowSet</code> changes to the data source.
 *
 * <P>
 * For the next level up, the
 * writer checks to see if there are any conflicts, and if there are,
 * it does not write anything to the data source.  The problem with this concurrency
 * level is that if another party has modified the corresponding data in the data source
 * since the <code>RowSet</code> object got its data,
 * the changes made to the <code>RowSet</code> object are lost. The
 * <code>RIOptimisticProvider</code> implementation uses this level of synchronization.
 * <P>
 * At higher levels of synchronization, referred to as pessimistic concurrency,
 * the writer take steps to avoid conflicts by setting locks. Setting locks
 * can vary from setting a lock on a single row to setting a lock on a table
 * or the entire data source. The level of synchronization is therefore a tradeoff
 * between the ability of users to access the data source concurrently and the  ability
 * of the writer to keep the data in the <code>RowSet</code> object and its data source
 * synchronized.
 * <P>
 * It is a requirement that all disconnected <code>RowSet</code> objects
 * (<code>CachedRowSet</code>, <code>FilteredRowSet</code>, <code>JoinRowSet</code>,
 * and <code>WebRowSet</code> objects) obtain their <code>SyncProvider</code> objects
 * from the <code>SyncFactory</code> mechanism.
 * <P>
 * The reference implementation (RI) provides two synchronization providers.
 *    <UL>
 *       <LI><b><code>RIOptimisticProvider</code></b> <br>
 *            The default provider that the <code>SyncFactory</code> instance will
 *            supply to a disconnected <code>RowSet</code> object when no provider
 *            implementation is specified.<BR>
 *            This synchronization provider uses an optimistic concurrency model,
 *            assuming that there will be few conflicts among users
 *            who are accessing the same data in a database.  It avoids
 *            using locks; rather, it checks to see if there is a conflict
 *            before trying to synchronize the <code>RowSet</code> object and the
 *            data source. If there is a conflict, it does nothing, meaning that
 *            changes to the <code>RowSet</code> object are not persisted to the data
 *            source.
 *        <LI><B><code>RIXMLProvider</code></B> <BR>
 *             A synchronization provider that can be used with a
 *             <code>WebRowSet</code> object, which is a rowset that can be written
 *             in XML format or read from XML format. The
 *             <code>RIXMLProvider</code> implementation does no checking at all for
 *             conflicts and simply writes any updated data in the
 *             <code>WebRowSet</code> object to the underlying data source.
 *             <code>WebRowSet</code> objects use this provider when they are
 *             dealing with XML data.
 *     </UL>
 *
 *  These <code>SyncProvider</code> implementations
 *  are bundled with the reference implementation, which makes them always available to
 *  <code>RowSet</code> implementations.
 *  <code>SyncProvider</code> implementations make themselves available by being
 *  registered with the <code>SyncFactory</code> singleton.  When a <code>RowSet</code>
 *  object requests a provider, by specifying it in the constructor or as an argument to the
 *  <code>CachedRowSet</code> method <code>setSyncProvider</code>,
 *  the <code>SyncFactory</code> singleton
 *  checks to see if the requested provider has been registered with it.
 *  If it has, the <code>SyncFactory</code> creates an instance of it and passes it to the
 *  requesting <code>RowSet</code> object.
 *  If the <code>SyncProvider</code> implementation that is specified has not been registered,
 *  the <code>SyncFactory</code> singleton causes a <code>SyncFactoryException</code> object
 *  to be thrown.  If no provider is specified,
 *  the <code>SyncFactory</code> singleton will create an instance of the default
 *  provider implementation, <code>RIOptimisticProvider</code>,
 *  and pass it to the requesting <code>RowSet</code> object.
 *
 * <P>
 * If a <code>WebRowSet</code> object does not specify a provider in its constructor, the
 * <code>SyncFactory</code> will give it an instance of <code>RIOptimisticProvider</code>.
 * However, the constructor for <code>WebRowSet</code> is implemented to set the provider
 * to the <code>RIXMLProvider</code>, which reads and writes a <code>RowSet</code> object
 *  in XML format.
 *  <P>
 * See the <a href="SyncProvider.html">SyncProvider</a> class
 *  specification for further details.
 * <p>
 * Vendors may develop a <code>SyncProvider</code> implementation with any one of the possible
 * levels of synchronization, thus giving <code>RowSet</code> objects a choice of
 * synchronization mechanisms.
 *
 * <h3><a id="arch">2.0 Service Provider Interface Architecture</a></h3>
 * <b>2.1 Overview</b>
 * <p>
 * The Service Provider Interface provides a pluggable mechanism by which
 * <code>SyncProvider</code> implementations can be registered and then generated when
 * required. The lazy reference mechanism employed by the <code>SyncFactory</code> limits
 * unnecessary resource consumption by not creating an instance until it is
 * required by a disconnected
 * <code>RowSet</code> object. The <code>SyncFactory</code> class also provides
 * a standard API to configure logging options and streams that <b>may</b> be provided
 * by a particular <code>SyncProvider</code> implementation.
 * <p>
 * <b>2.2 Registering with the <code>SyncFactory</code></b>
 * <p>
 * A third party <code>SyncProvider</code> implementation must be registered with the
 * <code>SyncFactory</code> in order for a disconnected <code>RowSet</code> object
 * to obtain it and thereby use its <code>javax.sql.RowSetReader</code> and
 * <code>javax.sql.RowSetWriter</code>
 * implementations. The following registration mechanisms are available to all
 * <code>SyncProvider</code> implementations:
 * <ul>
 * <li><b>System properties</b> - Properties set at the command line. These
 * properties are set at run time and apply system-wide per invocation of the Java
 * application. See the section <a href="#reldocs">"Related Documentation"</a>
 * further related information.
 *
 * <li><b>Property Files</b> - Properties specified in a standard property file.
 * This can be specified using a System Property or by modifying a standard
 * property file located in the platform run-time. The
 * reference implementation of this technology includes a standard property
 * file than can be edited to add additional <code>SyncProvider</code> objects.
 *
 * <li><b>JNDI Context</b> - Available providers can be registered on a JNDI
 * context. The <code>SyncFactory</code> will attempt to load <code>SyncProvider</code>
 * objects bound to the context and register them with the factory. This
 * context must be supplied to the <code>SyncFactory</code> for the mechanism to
 * function correctly.
 * </ul>
 * <p>
 * Details on how to specify the system properties or properties in a property file
 * and how to configure the JNDI Context are explained in detail in the
 * <a href="SyncFactory.html"><code>SyncFactory</code></a> class description.
 * <p>
 * <b>2.3 SyncFactory Provider Instance Generation Policies</b>
 * <p>
 * The <code>SyncFactory</code> generates a requested <code>SyncProvider</code>
 * object if the provider has been correctly registered.  The
 * following policies are adhered to when either a disconnected <code>RowSet</code> object
 * is instantiated with a specified <code>SyncProvider</code> implementation or is
 * reconfigured at runtime with an alternative <code>SyncProvider</code> object.
 * <ul>
 * <li> If a <code>SyncProvider</code> object is specified and the <code>SyncFactory</code>
 * contains <i>no</i> reference to the provider, a <code>SyncFactoryException</code> is
 * thrown.
 *
 * <li> If a <code>SyncProvider</code> object is specified and the <code>SyncFactory</code>
 * contains a reference to the provider, the requested provider is supplied.
 *
 * <li> If no <code>SyncProvider</code> object is specified, the reference
 * implementation provider <code>RIOptimisticProvider</code> is supplied.
 * </ul>
 * <p>
 * These policies are explored in more detail in the <a href="SyncFactory.html">
 * <code>SyncFactory</code></a> class.
 *
 * <h3><a id="impl">3.0 SyncProvider Implementer's Guide</a></h3>
 *
 * <b>3.1 Requirements</b>
 * <p>
 * A compliant <code>SyncProvider</code> implementation that is fully pluggable
 * into the <code>SyncFactory</code> <b>must</b> extend and implement all
 * abstract methods in the <a href="SyncProvider.html"><code>SyncProvider</code></a>
 * class. In addition, an implementation <b>must</b> determine the
 * grade, locking and updatable view capabilities defined in the
 * <code>SyncProvider</code> class definition. One or more of the
 * <code>SyncProvider</code> description criteria <b>must</b> be supported. It
 * is expected that vendor implementations will offer a range of grade, locking, and
 * updatable view capabilities.
 * <p>
 * Furthermore, the <code>SyncProvider</code> naming convention <b>must</b> be followed as
 * detailed in the <a href="SyncProvider.html"><code>SyncProvider</code></a> class
 * description.
 * <p>
 * <b>3.2 Grades</b>
 * <p>
 * JSR 114 defines a set of grades to describe the quality of synchronization
 * a <code>SyncProvider</code> object can offer a disconnected <code>RowSet</code>
 * object. These grades are listed from the lowest quality of service to the highest.
 * <ul>
 * <li><b>GRADE_NONE</b> - No synchronization with the originating data source is
 * provided. A <code>SyncProvider</code> implementation returning this grade will simply
 * attempt to write any data that has changed in the <code>RowSet</code> object to the
 *underlying data source, overwriting whatever is there. No attempt is made to compare
 * original values with current values to see if there is a conflict. The
 * <code>RIXMLProvider</code> is implemented with this grade.
 *
 * <li><b>GRADE_CHECK_MODIFIED_AT_COMMIT</b> - A low grade of optimistic synchronization.
 * A <code>SyncProvider</code> implementation returning this grade
 * will check for conflicts in rows that have changed between the last synchronization
 * and the current synchronization under way. Any changes in the originating data source
 * that have been modified will not be reflected in the disconnected <code>RowSet</code>
 * object. If there are no conflicts, changes in the <code>RowSet</code> object will be
 * written to the data source. If there are conflicts, no changes are written.
 * The <code>RIOptimisticProvider</code> implementation uses this grade.
 *
 * <li><b>GRADE_CHECK_ALL_AT_COMMIT</b> - A high grade of optimistic synchronization.
 * A <code>SyncProvider</code> implementation   returning this grade
 * will check all rows, including rows that have not changed in the disconnected
 * <code>RowSet</code> object. In this way, any changes to rows in the underlying
 * data source will be reflected in the disconnected <code>RowSet</code> object
 * when the synchronization finishes successfully.
 *
 * <li><b>GRADE_LOCK_WHEN_MODIFIED</b> - A pessimistic grade of synchronization.
 * <code>SyncProvider</code> implementations returning this grade will lock
 * the row in the originating  data source that corresponds to the row being changed
 * in the <code>RowSet</code> object to reduce the possibility of other
 * processes modifying the same data in the data source.
 *
 * <li><b>GRADE_LOCK_WHEN_LOADED</b> - A higher pessimistic synchronization grade.
 * A <code>SyncProvider</code> implementation returning this grade will lock
 * the entire view and/or  table affected by the original query used to
 * populate a <code>RowSet</code> object.
 * </ul>
 * <p>
 * <b>3.3 Locks</b>
 * <p>
 * JSR 114 defines a set of constants that specify whether any locks have been
 * placed on a <code>RowSet</code> object's underlying data source and, if so,
 * on which constructs the locks are placed.  These locks will remain on the data
 * source while the <code>RowSet</code> object is disconnected from the data source.
 * <P>
 * These constants <b>should</b> be considered complementary to the
 * grade constants. The default setting for the majority of grade settings requires
 * that no data source locks remain when a <code>RowSet</code> object is disconnected
 * from its data source.
 * The grades <code>GRADE_LOCK_WHEN_MODIFIED</code> and
 * <code>GRADE_LOCK_WHEN_LOADED</code> allow a disconnected <code>RowSet</code> object
 * to have a fine-grained control over the degree of locking.
 * <ul>
 * <li><b>DATASOURCE_NO_LOCK</b> - No locks remain on the originating data source.
 * This is the default lock setting for all <code>SyncProvider</code> implementations
 * unless otherwise directed by a <code>RowSet</code> object.
 *
 * <li><b>DATASOURCE_ROW_LOCK</b> - A lock is placed on the rows that are touched by
 * the original SQL query used to populate the <code>RowSet</code> object.
 *
 * <li><b>DATASOURCE_TABLE_LOCK</b> - A lock is placed on all tables that are touched
 * by the query that was used to populate the <code>RowSet</code> object.
 *
 * <li><b>DATASOURCE_DB_LOCK</b>
 * A lock is placed on the entire data source that is used by the <code>RowSet</code>
 * object.
 * </ul>
 * <p>
 * <b>3.4 Updatable Views</b>
 * <p>
 * A <code>RowSet</code> object may be populated with data from an SQL <code>VIEW</code>.
 * The following constants indicate whether a <code>SyncProvider</code> object can
 * update data in the table or tables from which the <code>VIEW</code> was derived.
 * <ul>
 * <li><b>UPDATABLE_VIEW_SYNC</b>
 * Indicates that a <code>SyncProvider</code> implementation  supports synchronization
 * to the table or tables from which the SQL <code>VIEW</code> used to populate
 * a <code>RowSet</code> object is derived.
 *
 * <li><b>NONUPDATABLE_VIEW_SYNC</b>
 * Indicates that a <code>SyncProvider</code> implementation  does <b>not</b> support
 * synchronization to the table or tables from which the SQL <code>VIEW</code>
 * used to populate  a <code>RowSet</code> object is derived.
 * </ul>
 * <p>
 * <b>3.5 Usage of <code>SyncProvider</code> Grading and Locking</b>
 * <p>
 * In the example below, the reference <code>CachedRowSetImpl</code> implementation
 * reconfigures its current <code>SyncProvider</code> object by calling the
 * <code>setSyncProvider</code> method.<br>
 *
 * <PRE>
 *   CachedRowSetImpl crs = new CachedRowSetImpl();
 *   crs.setSyncProvider("com.foo.bar.HASyncProvider");
 * </PRE>
 *   An application can retrieve the <code>SyncProvider</code> object currently in use
 * by a disconnected <code>RowSet</code> object. It can also retrieve the
 * grade of synchronization with which the provider was implemented and the degree of
 * locking currently in use.  In addition, an application has the flexibility to set
 * the degree of locking to be used, which can increase the possibilities for successful
 * synchronization.  These operation are shown in the following code fragment.
 * <PRE>
 *   SyncProvider sync = crs.getSyncProvider();
 *
 *   switch (sync.getProviderGrade()) {
 *   case: SyncProvider.GRADE_CHECK_ALL_AT_COMMIT
 *         //A high grade of optimistic synchronization
 *    break;
 *    case: SyncProvider.GRADE_CHECK_MODIFIED_AT_COMMIT
 *         //A low grade of optimistic synchronization
 *    break;
 *    case: SyncProvider.GRADE_LOCK_WHEN_LOADED
 *         // A pessimistic synchronization grade
 *    break;
 *    case: SyncProvider.GRADE_LOCK_WHEN_MODIFIED
 *         // A pessimistic synchronization grade
 *    break;
 *    case: SyncProvider.GRADE_NONE
 *      // No synchronization with the originating data source provided
 *    break;
 *    }
 *
 *    switch (sync.getDataSourcLock() {
 *      case: SyncProvider.DATASOURCE_DB_LOCK
 *       // A lock is placed on the entire datasource that is used by the
 *       // <code>RowSet</code> object
 *       break;
 *
 *      case: SyncProvider.DATASOURCE_NO_LOCK
 *       // No locks remain on the  originating data source.
 *      break;
 *
 *      case: SyncProvider.DATASOURCE_ROW_LOCK
 *       // A lock is placed on the rows that are  touched by the original
 *       // SQL statement used to populate
 *       // the RowSet object that is using the SyncProvider
 *       break;
 *
 *      case: DATASOURCE_TABLE_LOCK
 *       // A lock is placed on  all tables that are touched by the original
 *       // SQL statement used to populated
 *       // the RowSet object that is using the SyncProvider
 *      break;
 *
 * </PRE>
 *    It is also possible using the static utility method in the
 * <code>SyncFactory</code> class to determine the list of <code>SyncProvider</code>
 * implementations currently registered with the <code>SyncFactory</code>.
 *
 * <pre>
 *       Enumeration e = SyncFactory.getRegisteredProviders();
 * </pre>
 *
 *
 * <h3><a id="resolving">4.0 Resolving Synchronization Conflicts</a></h3>
 *
 * The interface <code>SyncResolver</code> provides a way for an application to
 * decide manually what to do when a conflict occurs. When the <code>CachedRowSet</code>
 * method <code>acceptChanges</code> finishes and has detected one or more conflicts,
 * it throws a <code>SyncProviderException</code> object.  An application can
 * catch the exception and
 * have it retrieve a <code>SyncResolver</code> object by calling the method
 * <code>SyncProviderException.getSyncResolver()</code>.
 * <P>
 * A <code>SyncResolver</code> object, which is a special kind of
 * <code>CachedRowSet</code> object or
 * a <code>JdbcRowSet</code> object that has implemented the <code>SyncResolver</code>
 * interface,  examines the conflicts row by row. It is a duplicate of the
 * <code>RowSet</code> object being synchronized except that it contains only the data
 * from the data source this is causing a conflict. All of the other column values are
 * set to <code>null</code>. To navigate from one conflict value to another, a
 * <code>SyncResolver</code> object provides the methods <code>nextConflict</code> and
 * <code>previousConflict</code>.
 * <P>
 * The <code>SyncResolver</code> interface also
 * provides methods for doing the following:
 * <UL>
 *  <LI>finding out whether the conflict involved an update, a delete, or an insert
 *  <LI>getting the value in the data source that caused the conflict
 *  <LI>setting the value that should be in the data source if it needs to be changed
 *      or setting the value that should be in the <code>RowSet</code> object if it needs
 *      to be changed
 * </UL>
 * <P>
 * When the <code>CachedRowSet</code> method <code>acceptChanges</code> is called, it
 * delegates to the <code>RowSet</code> object's  <code>SyncProvider</code> object.
 * How the writer provided by that <code>SyncProvider</code> object is implemented
 * determines what level (grade) of checking for conflicts will be done.  After all
 * checking for conflicts is completed and one or more conflicts has been found, the method
 * <code>acceptChanges</code> throws a <code>SyncProviderException</code> object. The
 * application can catch the exception and use it to obtain a <code>SyncResolver</code> object.
 * <P>
 * The application can then use <code>SyncResolver</code> methods to get information
 * about each conflict and decide what to do.  If the application logic or the user
 * decides that a value in the <code>RowSet</code> object should be the one to
 * persist, the application or user can overwrite the data source value with it.
 * <P>
 * The comment for the <code>SyncResolver</code> interface has more detail.
 *
 * <h3><a id="relspec">5.0 Related Specifications</a></h3>
 * <ul>
 * <li><a href="http://docs.oracle.com/javase/jndi/tutorial/index.html">JNDI</a>
 * <li><a href="{@docRoot}/java.logging/java/util/logging/package-summary.html">Java Logging
 * APIs</a>
 * </ul>
 * <h3><a id="reldocs">6.0 Related Documentation</a></h3>
 * <ul>
 * <li><a href="http://docs.oracle.com/javase/tutorial/jdbc/">DataSource for JDBC
 * Connections</a>
 * </ul>
 */
package javax.sql.rowset.spi;