https://openjdk.java.net/ 
/*
 * Copyright (c) 2000, 2017, Oracle and/or its affiliates. All rights reserved.
 * DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
 *
 * This code is free software; you can redistribute it and/or modify it
 * under the terms of the GNU General Public License version 2 only, as
 * published by the Free Software Foundation.  Oracle designates this
 * particular file as subject to the "Classpath" exception as provided
 * by Oracle in the LICENSE file that accompanied this code.
 *
 * This code is distributed in the hope that it will be useful, but WITHOUT
 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
 * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
 * version 2 for more details (a copy is included in the LICENSE file that
 * accompanied this code).
 *
 * You should have received a copy of the GNU General Public License version
 * 2 along with this work; if not, write to the Free Software Foundation,
 * Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.
 *
 * Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA
 * or visit www.oracle.com if you need additional information or have any
 * questions.
 */

package javax.print.attribute;

import java.io.Serializable;


Class Size2DSyntax is an abstract base class providing the common implementation of all attributes denoting a size in two dimensions. 
 A two-dimensional size attribute's value consists of two items, the X dimension and the Y dimension. A two-dimensional size attribute may be constructed by supplying the two values and indicating the units in which the values are measured. Methods are provided to return a two-dimensional size attribute's values, indicating the units in which the values are to be returned. The two most common size units are inches (in) and millimeters (mm), and exported constants INCH and MM are provided for indicating those units. 

Once constructed, a two-dimensional size attribute's value is immutable.


Design

 A two-dimensional size attribute's X and Y dimension values are stored internally as integers in units of micrometers (µm), where 1 micrometer = 10-6 meter = 1/1000 millimeter = 1/25400 inch. This
permits dimensions to be represented exactly to a precision of 1/1000 mm (= 1
µm) or 1/100 inch (= 254 µm). If fractional inches are expressed in
negative powers of two, this permits dimensions to be represented exactly to
a precision of 1/8 inch (= 3175 µm) but not 1/16 inch (because 1/16 inch
does not equal an integral number of µm).

 Storing the dimensions internally in common units of µm lets two size attributes be compared without regard to the units in which they were created; for example, 8.5 in will compare equal to 215.9 mm, as they both are stored as 215900 µm. For example, a lookup service can match resolution attributes based on equality of their serialized representations regardless of the units in which they were created. Using integers for internal storage allows precise equality comparisons to be done, which would not be guaranteed if an internal floating point representation were used. Note that if you're looking for U.S. letter sized media in metric units, you have to search for a media size of 215.9 x 279.4 mm; rounding off to an integral 216 x 279 mm will not match. 
 The exported constant INCH is actually the conversion factor by which to multiply a value in inches to get the value in µm. Likewise, the exported constant MM is the conversion factor by which to multiply a value in mm to get the value in µm. A client can specify a resolution value in units other than inches or mm by supplying its own conversion factor. However, since the internal units of µm was chosen with supporting only the external units of inch and mm in mind, there is no guarantee that the conversion factor for the client's units will be an exact integer. If the conversion factor isn't an exact integer, resolution values in the client's units won't be stored precisely. 
Author:Alan Kaminsky
/**
 * Class {@code Size2DSyntax} is an abstract base class providing the common
 * implementation of all attributes denoting a size in two dimensions.
 * <p>
 * A two-dimensional size attribute's value consists of two items, the {@code X}
 * dimension and the {@code Y} dimension. A two-dimensional size attribute may
 * be constructed by supplying the two values and indicating the units in which
 * the values are measured. Methods are provided to return a two-dimensional
 * size attribute's values, indicating the units in which the values are to be
 * returned. The two most common size units are inches (in) and millimeters
 * (mm), and exported constants {@link #INCH INCH} and {@link #MM MM} are
 * provided for indicating those units.
 * <p>
 * Once constructed, a two-dimensional size attribute's value is immutable.
 * <p>
 * <b>Design</b>
 * <p>
 * A two-dimensional size attribute's {@code X} and {@code Y} dimension values
 * are stored internally as integers in units of micrometers (&#181;m), where 1
 * micrometer = 10<SUP>-6</SUP> meter = 1/1000 millimeter = 1/25400 inch. This
 * permits dimensions to be represented exactly to a precision of 1/1000 mm (= 1
 * &#181;m) or 1/100 inch (= 254 &#181;m). If fractional inches are expressed in
 * negative powers of two, this permits dimensions to be represented exactly to
 * a precision of 1/8 inch (= 3175 &#181;m) but not 1/16 inch (because 1/16 inch
 * does not equal an integral number of &#181;m).
 * <p>
 * Storing the dimensions internally in common units of &#181;m lets two size
 * attributes be compared without regard to the units in which they were
 * created; for example, 8.5 in will compare equal to 215.9 mm, as they both are
 * stored as 215900 &#181;m. For example, a lookup service can match resolution
 * attributes based on equality of their serialized representations regardless
 * of the units in which they were created. Using integers for internal storage
 * allows precise equality comparisons to be done, which would not be guaranteed
 * if an internal floating point representation were used. Note that if you're
 * looking for {@code U.S. letter} sized media in metric units, you have to
 * search for a media size of 215.9 x 279.4 mm; rounding off to an integral
 * 216 x 279 mm will not match.
 * <p>
 * The exported constant {@link #INCH INCH} is actually the conversion factor by
 * which to multiply a value in inches to get the value in &#181;m. Likewise,
 * the exported constant {@link #MM MM} is the conversion factor by which to
 * multiply a value in mm to get the value in &#181;m. A client can specify a
 * resolution value in units other than inches or mm by supplying its own
 * conversion factor. However, since the internal units of &#181;m was chosen
 * with supporting only the external units of inch and mm in mind, there is no
 * guarantee that the conversion factor for the client's units will be an exact
 * integer. If the conversion factor isn't an exact integer, resolution values
 * in the client's units won't be stored precisely.
 *
 * @author Alan Kaminsky
 */
public abstract class Size2DSyntax implements Serializable, Cloneable {

    
Use serialVersionUID from JDK 1.4 for interoperability.

/**
     * Use serialVersionUID from JDK 1.4 for interoperability.
     */
    private static final long serialVersionUID = 5584439964938660530L;

    
X dimension in units of micrometers (µm). 
@serial
/**
     * {@code X} dimension in units of micrometers (&#181;m).
     *
     * @serial
     */
    private int x;

    
Y dimension in units of micrometers (µm). 
@serial
/**
     * {@code Y} dimension in units of micrometers (&#181;m).
     *
     * @serial
     */
    private int y;

    
Value to indicate units of inches (in). It is actually the conversion
factor by which to multiply inches to yield µm (25400).

/**
     * Value to indicate units of inches (in). It is actually the conversion
     * factor by which to multiply inches to yield &#181;m (25400).
     */
    public static final int INCH = 25400;

    
Value to indicate units of millimeters (mm). It is actually the
conversion factor by which to multiply mm to yield µm (1000).

/**
     * Value to indicate units of millimeters (mm). It is actually the
     * conversion factor by which to multiply mm to yield &#181;m (1000).
     */
    public static final int MM = 1000;

    
Construct a new two-dimensional size attribute from the given
floating-point values.

Params:
  • x – X dimension
  • y – Y dimension
  • units – unit conversion factor, e.g. INCH or MM
Throws:
/**
     * Construct a new two-dimensional size attribute from the given
     * floating-point values.
     *
     * @param  x {@code X} dimension
     * @param  y {@code Y} dimension
     * @param  units unit conversion factor, e.g. {@link #INCH INCH} or
     *         {@link #MM MM}
     * @throws IllegalArgumentException if {@code x < 0} or {@code y < 0} or
     *         {@code units < 1}
     */
    protected Size2DSyntax(float x, float y, int units) {
        if (x < 0.0f) {
            throw new IllegalArgumentException("x < 0");
        }
        if (y < 0.0f) {
            throw new IllegalArgumentException("y < 0");
        }
        if (units < 1) {
            throw new IllegalArgumentException("units < 1");
        }
        this.x = (int) (x * units + 0.5f);
        this.y = (int) (y * units + 0.5f);
    }

    
Construct a new two-dimensional size attribute from the given integer
values.

Params:
  • x – X dimension
  • y – Y dimension
  • units – unit conversion factor, e.g. INCH or MM
Throws:
/**
     * Construct a new two-dimensional size attribute from the given integer
     * values.
     *
     * @param  x {@code X} dimension
     * @param  y {@code Y} dimension
     * @param  units unit conversion factor, e.g. {@link #INCH INCH} or
     *         {@link #MM MM}
     * @throws IllegalArgumentException if {@code x < 0} or {@code y < 0} or
     *         {@code units < 1}
     */
    protected Size2DSyntax(int x, int y, int units) {
        if (x < 0) {
            throw new IllegalArgumentException("x < 0");
        }
        if (y < 0) {
            throw new IllegalArgumentException("y < 0");
        }
        if (units < 1) {
            throw new IllegalArgumentException("units < 1");
        }
        this.x = x * units;
        this.y = y * units;
    }

    
Convert a value from micrometers to some other units. The result is
returned as a floating-point number.

Params:
  • x – value (micrometers) to convert
  • units – unit conversion factor, e.g. INCH or MM
Throws:
Returns:the value of x converted to the desired units
/**
     * Convert a value from micrometers to some other units. The result is
     * returned as a floating-point number.
     *
     * @param  x value (micrometers) to convert
     * @param  units unit conversion factor, e.g. {@link #INCH INCH} or
     *         {@link #MM MM}
     * @return the value of {@code x} converted to the desired units
     * @throws IllegalArgumentException if {@code units < 1}
     */
    private static float convertFromMicrometers(int x, int units) {
        if (units < 1) {
            throw new IllegalArgumentException("units is < 1");
        }
        return ((float)x) / ((float)units);
    }

    
Get this two-dimensional size attribute's dimensions in the given units
as floating-point values.

Params:
  • units – unit conversion factor, e.g. INCH or MM
Throws:
Returns:a two-element array with the X dimension at index 0 and the Y dimension at index 1
/**
     * Get this two-dimensional size attribute's dimensions in the given units
     * as floating-point values.
     *
     * @param  units unit conversion factor, e.g. {@link #INCH INCH} or
     *         {@link #MM MM}
     * @return a two-element array with the {@code X} dimension at index 0 and
     *         the {@code Y} dimension at index 1
     * @throws IllegalArgumentException if {@code units < 1}
     */
    public float[] getSize(int units) {
        return new float[] {getX(units), getY(units)};
    }

    
Returns this two-dimensional size attribute's X dimension in the given units as a floating-point value. 
Params:
  • units – unit conversion factor, e.g. INCH or MM
Throws:
Returns:X dimension
/**
     * Returns this two-dimensional size attribute's {@code X} dimension in the
     * given units as a floating-point value.
     *
     * @param  units unit conversion factor, e.g. {@link #INCH INCH} or
     *         {@link #MM MM}
     * @return {@code X} dimension
     * @throws IllegalArgumentException if {@code units < 1}
     */
    public float getX(int units) {
        return convertFromMicrometers(x, units);
    }

    
Returns this two-dimensional size attribute's Y dimension in the given units as a floating-point value. 
Params:
  • units – unit conversion factor, e.g. INCH or MM
Throws:
Returns:Y dimension
/**
     * Returns this two-dimensional size attribute's {@code Y} dimension in the
     * given units as a floating-point value.
     *
     * @param  units unit conversion factor, e.g. {@link #INCH INCH} or
     *         {@link #MM MM}
     * @return {@code Y} dimension
     * @throws IllegalArgumentException if {@code units < 1}
     */
    public float getY(int units) {
        return convertFromMicrometers(y, units);
    }

    
Returns a string version of this two-dimensional size attribute in the
given units. The string takes the form "XxY
U", where X is the X dimension, Y is the Y dimension, and U is the units name. The values are
displayed in floating point.

Params:
  • units – unit conversion factor, e.g. INCH or MM
  • unitsName – units name string, e.g. in or mm. If null, no units name is appended to the result
Throws:
Returns:String version of this two-dimensional size attribute
/**
     * Returns a string version of this two-dimensional size attribute in the
     * given units. The string takes the form <code>"<i>X</i>x<i>Y</i>
     * <i>U</i>"</code>, where <i>X</i> is the {@code X} dimension, <i>Y</i> is
     * the {@code Y} dimension, and <i>U</i> is the units name. The values are
     * displayed in floating point.
     *
     * @param  units unit conversion factor, e.g. {@link #INCH INCH} or
     *         {@link #MM MM}
     * @param  unitsName units name string, e.g. {@code in} or {@code mm}. If
     *         {@code null}, no units name is appended to the result
     * @return {@code String} version of this two-dimensional size attribute
     * @throws IllegalArgumentException if {@code units < 1}
     */
    public String toString(int units, String unitsName) {
        StringBuilder result = new StringBuilder();
        result.append(getX (units));
        result.append('x');
        result.append(getY (units));
        if (unitsName != null) {
            result.append(' ');
            result.append(unitsName);
        }
        return result.toString();
    }

    
Returns whether this two-dimensional size attribute is equivalent to the
passed in object. To be equivalent, all of the following conditions must
be true:

    
  
  1. object is not null. 
  2. object is an instance of class Size2DSyntax 
  3. This attribute's X dimension is equal to object's X dimension. 
  4. This attribute's Y dimension is equal to object's Y dimension. 


Params:
  • object – Object to compare to
Returns:true if object is equivalent to this two-dimensional size attribute, false otherwise
/**
     * Returns whether this two-dimensional size attribute is equivalent to the
     * passed in object. To be equivalent, all of the following conditions must
     * be true:
     * <ol type=1>
     *   <li>{@code object} is not {@code null}.
     *   <li>{@code object} is an instance of class {@code Size2DSyntax}
     *   <li>This attribute's {@code X} dimension is equal to {@code object}'s
     *   {@code X} dimension.
     *   <li>This attribute's {@code Y} dimension is equal to {@code object}'s
     *   {@code Y} dimension.
     * </ol>
     *
     * @param  object {@code Object} to compare to
     * @return {@code true} if {@code object} is equivalent to this
     *         two-dimensional size attribute, {@code false} otherwise
     */
    public boolean equals(Object object) {
        return(object != null &&
               object instanceof Size2DSyntax &&
               this.x == ((Size2DSyntax) object).x &&
               this.y == ((Size2DSyntax) object).y);
    }

    
Returns a hash code value for this two-dimensional size attribute.

/**
     * Returns a hash code value for this two-dimensional size attribute.
     */
    public int hashCode() {
        return (((x & 0x0000FFFF)      ) |
                ((y & 0x0000FFFF) << 16));
    }

    
Returns a string version of this two-dimensional size attribute. The
string takes the form "XxY um", where X is the X dimension and Y is the Y dimension. The values are reported in the internal units of micrometers. 
/**
     * Returns a string version of this two-dimensional size attribute. The
     * string takes the form <code>"<i>X</i>x<i>Y</i> um"</code>, where <i>X</i>
     * is the {@code X} dimension and <i>Y</i> is the {@code Y} dimension. The
     * values are reported in the internal units of micrometers.
     */
    public String toString() {
        StringBuilder result = new StringBuilder();
        result.append(x);
        result.append('x');
        result.append(y);
        result.append(" um");
        return result.toString();
    }

    
Returns this two-dimensional size attribute's X dimension in units of micrometers (µm). (For use in a subclass.) 
Returns:X dimension (µm)
/**
     * Returns this two-dimensional size attribute's {@code X} dimension in
     * units of micrometers (&#181;m). (For use in a subclass.)
     *
     * @return {@code X} dimension (&#181;m)
     */
    protected int getXMicrometers(){
        return x;
    }

    
Returns this two-dimensional size attribute's Y dimension in units of micrometers (µm). (For use in a subclass.) 
Returns:Y dimension (µm)
/**
     * Returns this two-dimensional size attribute's {@code Y} dimension in
     * units of micrometers (&#181;m). (For use in a subclass.)
     *
     * @return {@code Y} dimension (&#181;m)
     */
    protected int getYMicrometers() {
        return y;
    }
}