/*
* Licensed to the Apache Software Foundation (ASF) under one or more
* contributor license agreements. See the NOTICE file distributed with
* this work for additional information regarding copyright ownership.
* The ASF licenses this file to You under the Apache License, Version 2.0
* (the "License"); you may not use this file except in compliance with
* the License. You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
// $Id: SchemaFactory.java 884952 2009-11-27 18:55:08Z mrglavas $
package javax.xml.validation;
import java.io.File;
import java.net.URL;
import javax.xml.transform.Source;
import javax.xml.transform.stream.StreamSource;
import org.w3c.dom.ls.LSResourceResolver;
import org.xml.sax.ErrorHandler;
import org.xml.sax.SAXException;
import org.xml.sax.SAXNotRecognizedException;
import org.xml.sax.SAXNotSupportedException;
Factory that creates Schema
objects. Entry-point to the validation API. SchemaFactory
is a schema compiler. It reads external representations of schemas and prepares them for validation.
The SchemaFactory
class is not thread-safe. In other words, it is the application's responsibility to ensure that at most one thread is using a SchemaFactory
object at any given moment. Implementations are encouraged to mark methods as synchronized to protect themselves from broken clients.
SchemaFactory
is not re-entrant. While one of the newSchema
methods is being invoked, applications
may not attempt to recursively invoke the newSchema
method,
even from the same thread.
Schema Language
This spec uses a namespace URI to designate a schema language.
The following table shows the values defined by this specification.
To be compliant with the spec, the implementation
is only required to support W3C XML Schema 1.0. However,
if it chooses to support other schema languages listed here,
it must conform to the relevant behaviors described in this spec.
Schema languages not listed here are expected to introduce their own URIs to represent themselves. The SchemaFactory
class is capable of locating other implementations for other schema languages at run-time.
Note that because the XML DTD is strongly tied to the parsing process
and has a significant effect on the parsing process, it is impossible
to define the DTD validation as a process independent from parsing.
For this reason, this specification does not define the semantics for
the XML DTD. This doesn't prohibit implementors from implementing it
in a way they see fit, but users are warned that any DTD
validation implemented on this interface necessarily deviate from
the XML DTD semantics as defined in the XML 1.0.
value
language
XMLConstants.W3C_XML_SCHEMA_NS_URI
("http://www.w3.org/2001/XMLSchema
")
W3C XML Schema 1.0
XMLConstants.RELAXNG_NS_URI
("http://relaxng.org/ns/structure/1.0
")
RELAX NG 1.0
Author: Kohsuke Kawaguchi Version: $Revision: 884952 $, $Date: 2009-11-27 13:55:08 -0500 (Fri, 27 Nov 2009) $ Since: 1.5
/**
* Factory that creates {@link Schema} objects. Entry-point to
* the validation API.
*
* <p>
* {@link SchemaFactory} is a schema compiler. It reads external
* representations of schemas and prepares them for validation.
*
* <p>
* The {@link SchemaFactory} class is not thread-safe. In other words,
* it is the application's responsibility to ensure that at most
* one thread is using a {@link SchemaFactory} object at any
* given moment. Implementations are encouraged to mark methods
* as <tt>synchronized</tt> to protect themselves from broken clients.
*
* <p>
* {@link SchemaFactory} is not re-entrant. While one of the
* <code>newSchema</code> methods is being invoked, applications
* may not attempt to recursively invoke the <code>newSchema</code> method,
* even from the same thread.
*
* <h2><a name="schemaLanguage"></a>Schema Language</h2>
* <p>
* This spec uses a namespace URI to designate a schema language.
* The following table shows the values defined by this specification.
* <p>
* To be compliant with the spec, the implementation
* is only required to support W3C XML Schema 1.0. However,
* if it chooses to support other schema languages listed here,
* it must conform to the relevant behaviors described in this spec.
*
* <p>
* Schema languages not listed here are expected to
* introduce their own URIs to represent themselves.
* The {@link SchemaFactory} class is capable of locating other
* implementations for other schema languages at run-time.
*
* <p>
* Note that because the XML DTD is strongly tied to the parsing process
* and has a significant effect on the parsing process, it is impossible
* to define the DTD validation as a process independent from parsing.
* For this reason, this specification does not define the semantics for
* the XML DTD. This doesn't prohibit implementors from implementing it
* in a way they see fit, but <em>users are warned that any DTD
* validation implemented on this interface necessarily deviate from
* the XML DTD semantics as defined in the XML 1.0</em>.
*
* <table border="1" cellpadding="2">
* <thead>
* <tr>
* <th>value</th>
* <th>language</th>
* </tr>
* </thead>
* <tbody>
* <tr>
* <td>{@link javax.xml.XMLConstants#W3C_XML_SCHEMA_NS_URI} ("<code>http://www.w3.org/2001/XMLSchema</code>")</td>
* <td><a href="http://www.w3.org/TR/xmlschema-1">W3C XML Schema 1.0</a></td>
* </tr>
* <tr>
* <td>{@link javax.xml.XMLConstants#RELAXNG_NS_URI} ("<code>http://relaxng.org/ns/structure/1.0</code>")</td>
* <td><a href="http://www.relaxng.org/">RELAX NG 1.0</a></td>
* </tr>
* </tbody>
* </table>
*
* @author <a href="mailto:Kohsuke.Kawaguchi@Sun.com">Kohsuke Kawaguchi</a>
* @version $Revision: 884952 $, $Date: 2009-11-27 13:55:08 -0500 (Fri, 27 Nov 2009) $
* @since 1.5
*/
public abstract class SchemaFactory {
Constructor for derived classes.
The constructor does nothing.
Derived classes must create SchemaFactory
objects that have null
ErrorHandler
and null
LSResourceResolver
.
/**
* <p>Constructor for derived classes.</p>
*
* <p>The constructor does nothing.</p>
*
* <p>Derived classes must create {@link SchemaFactory} objects that have
* <code>null</code> {@link ErrorHandler} and
* <code>null</code> {@link LSResourceResolver}.</p>
*/
protected SchemaFactory() {
}
Lookup an implementation of the SchemaFactory
that supports the specified
schema language and return it.
To find a SchemaFactory
object for a given schema language,
this method looks the following places in the following order
where "the class loader" refers to the context class loader:
-
If the system property
"javax.xml.validation.SchemaFactory:schemaLanguage"
is present (where schemaLanguage is the parameter
to this method), then its value is read
as a class name. The method will try to
create a new instance of this class by using the class loader,
and returns it if it is successfully created.
-
$java.home/lib/jaxp.properties
is read and
the value associated with the key being the system property above
is looked for. If present, the value is processed just like above.
-
The class loader is asked for service provider provider-configuration files matching
javax.xml.validation.SchemaFactory
in the resource directory META-INF/services.
See the JAR File Specification for file format and parsing rules.
Each potential service provider is required to implement the method:
isSchemaLanguageSupported(String schemaLanguage)
The first service provider found in class loader order that supports the specified schema language is returned.
-
Platform default
SchemaFactory
is located
in a implementation specific way. There must be a platform default
SchemaFactory
for W3C XML Schema.
If everything fails, IllegalArgumentException
will be thrown.
Tip for Trouble-shooting:
See Properties.load(InputStream)
for exactly how a property file is parsed. In particular, colons ':' need to be escaped in a property file, so make sure schema language URIs are properly escaped in it. For example:
http\://www.w3.org/2001/XMLSchema=org.acme.foo.XSSchemaFactory
Params: - schemaLanguage –
Specifies the schema language which the returned
SchemaFactory will understand. See
the list of available
schema languages for the possible values.
Throws: - IllegalArgumentException –
If no implementation of the schema language is available.
- NullPointerException –
If the schemLanguage parameter is null.
Returns: New instance of a SchemaFactory
/**
* <p>Lookup an implementation of the <code>SchemaFactory</code> that supports the specified
* schema language and return it.</p>
*
* <p>To find a <code>SchemaFactory</code> object for a given schema language,
* this method looks the following places in the following order
* where "the class loader" refers to the context class loader:</p>
* <ol>
* <li>
* If the system property
* <code>"javax.xml.validation.SchemaFactory:<i>schemaLanguage</i>"</code>
* is present (where <i>schemaLanguage</i> is the parameter
* to this method), then its value is read
* as a class name. The method will try to
* create a new instance of this class by using the class loader,
* and returns it if it is successfully created.
* </li>
* <li>
* <code>$java.home/lib/jaxp.properties</code> is read and
* the value associated with the key being the system property above
* is looked for. If present, the value is processed just like above.
* </li>
* <li>
* <p>The class loader is asked for service provider provider-configuration files matching
* <code>javax.xml.validation.SchemaFactory</code> in the resource directory META-INF/services.
* See the JAR File Specification for file format and parsing rules.
* Each potential service provider is required to implement the method:</p>
* <pre>
* {@link #isSchemaLanguageSupported(String schemaLanguage)}
* </pre>
* The first service provider found in class loader order that supports the specified schema language is returned.
* </li>
* <li>
* Platform default <code>SchemaFactory</code> is located
* in a implementation specific way. There must be a platform default
* <code>SchemaFactory</code> for W3C XML Schema.
* </li>
* </ol>
*
* <p>If everything fails, {@link IllegalArgumentException} will be thrown.</p>
*
* <p><strong>Tip for Trouble-shooting:</strong></p>
* <p>See {@link java.util.Properties#load(java.io.InputStream)} for
* exactly how a property file is parsed. In particular, colons ':'
* need to be escaped in a property file, so make sure schema language
* URIs are properly escaped in it. For example:</p>
* <pre>
* http\://www.w3.org/2001/XMLSchema=org.acme.foo.XSSchemaFactory
* </pre>
*
* @param schemaLanguage
* Specifies the schema language which the returned
* SchemaFactory will understand. See
* <a href="#schemaLanguage">the list of available
* schema languages</a> for the possible values.
*
* @return New instance of a <code>SchemaFactory</code>
*
* @throws IllegalArgumentException
* If no implementation of the schema language is available.
*
* @throws NullPointerException
* If the <tt>schemLanguage</tt> parameter is null.
*/
public static final SchemaFactory newInstance(String schemaLanguage) {
ClassLoader cl;
cl = SecuritySupport.getContextClassLoader();
if (cl == null) {
//cl = ClassLoader.getSystemClassLoader();
//use the current class loader
cl = SchemaFactory.class.getClassLoader();
}
SchemaFactory f = new SchemaFactoryFinder(cl).newFactory(schemaLanguage);
if (f == null) {
throw new IllegalArgumentException(schemaLanguage);
}
return f;
}
Throws: - IllegalArgumentException –
If no implementation of the schema language is available.
- NullPointerException –
If the schemLanguage parameter is null.
Returns: New instance of a SchemaFactory
/**
* @return New instance of a <code>SchemaFactory</code>
*
* @throws IllegalArgumentException
* If no implementation of the schema language is available.
*
* @throws NullPointerException
* If the <tt>schemLanguage</tt> parameter is null.
*/
public static SchemaFactory newInstance(String schemaLanguage,
String factoryClassName, ClassLoader classLoader) {
if (schemaLanguage == null) {
throw new NullPointerException();
}
if (factoryClassName == null) {
throw new IllegalArgumentException("factoryClassName cannot be null.");
}
if (classLoader == null) {
classLoader = SecuritySupport.getContextClassLoader();
}
SchemaFactory f = new SchemaFactoryFinder(classLoader).createInstance(factoryClassName);
if (f == null || !f.isSchemaLanguageSupported(schemaLanguage)) {
throw new IllegalArgumentException(schemaLanguage);
}
return f;
}
Is specified schema supported by this SchemaFactory
?
Params: - schemaLanguage – Specifies the schema language which the returned
SchemaFactory
will understand.
schemaLanguage
must specify a valid schema language.
Throws: - NullPointerException – If
schemaLanguage
is null
. - IllegalArgumentException – If
schemaLanguage.length() == 0
or schemaLanguage
does not specify a valid schema language.
Returns: true
if SchemaFactory
supports schemaLanguage
, else false
.
/**
* <p>Is specified schema supported by this <code>SchemaFactory</code>?</p>
*
* @param schemaLanguage Specifies the schema language which the returned <code>SchemaFactory</code> will understand.
* <code>schemaLanguage</code> must specify a <a href="#schemaLanguage">valid</a> schema language.
*
* @return <code>true</code> if <code>SchemaFactory</code> supports <code>schemaLanguage</code>, else <code>false</code>.
*
* @throws NullPointerException If <code>schemaLanguage</code> is <code>null</code>.
* @throws IllegalArgumentException If <code>schemaLanguage.length() == 0</code>
* or <code>schemaLanguage</code> does not specify a <a href="#schemaLanguage">valid</a> schema language.
*/
public abstract boolean isSchemaLanguageSupported(String schemaLanguage);
Look up the value of a feature flag.
The feature name is any fully-qualified URI. It is possible for a SchemaFactory
to recognize a feature name but temporarily be unable to return its value.
Implementors are free (and encouraged) to invent their own features,
using names built on their own URIs.
Params: - name – The feature name, which is a non-null fully-qualified URI.
Throws: - SAXNotRecognizedException – If the feature
value can't be assigned or retrieved.
- SAXNotSupportedException – When the
SchemaFactory
recognizes the feature name but cannot determine its value at this time. - NullPointerException –
if the name parameter is null.
See Also: Returns: The current value of the feature (true or false).
/**
* Look up the value of a feature flag.
*
* <p>The feature name is any fully-qualified URI. It is
* possible for a {@link SchemaFactory} to recognize a feature name but
* temporarily be unable to return its value.
*
* <p>Implementors are free (and encouraged) to invent their own features,
* using names built on their own URIs.</p>
*
* @param name The feature name, which is a non-null fully-qualified URI.
* @return The current value of the feature (true or false).
* @exception org.xml.sax.SAXNotRecognizedException If the feature
* value can't be assigned or retrieved.
* @exception org.xml.sax.SAXNotSupportedException When the
* {@link SchemaFactory} recognizes the feature name but
* cannot determine its value at this time.
* @exception NullPointerException
* if the name parameter is null.
* @see #setFeature(String, boolean)
*/
public boolean getFeature(String name) throws SAXNotRecognizedException, SAXNotSupportedException {
if (name == null) {
throw new NullPointerException("the name parameter is null");
}
throw new SAXNotRecognizedException(name);
}
Set the value of a feature flag.
Feature can be used to control the way a SchemaFactory
parses schemas, although SchemaFactory
s are not required to recognize any specific feature names.
The feature name is any fully-qualified URI. It is possible for a SchemaFactory
to expose a feature value but to be unable to change the current value.
All implementations are required to support the XMLConstants.FEATURE_SECURE_PROCESSING
feature. When the feature is:
-
true
: the implementation will limit XML processing to conform to implementation limits. Examples include entity expansion limits and XML Schema constructs that would consume large amounts of resources. If XML processing is limited for security reasons, it will be reported via a call to the registered ErrorHandler.fatalError(SAXParseException exception)
. See setErrorHandler(ErrorHandler errorHandler)
.
-
false
: the implementation will processing XML according to the XML specifications without
regard to possible implementation limits.
Params: - name – The feature name, which is a non-null fully-qualified URI.
- value – The requested value of the feature (true or false).
Throws: - SAXNotRecognizedException – If the feature
value can't be assigned or retrieved.
- SAXNotSupportedException – When the
SchemaFactory
recognizes the feature name but cannot set the requested value. - NullPointerException –
if the name parameter is null.
See Also:
/**
* Set the value of a feature flag.
*
* <p>
* Feature can be used to control the way a {@link SchemaFactory}
* parses schemas, although {@link SchemaFactory}s are not required
* to recognize any specific feature names.</p>
*
* <p>The feature name is any fully-qualified URI. It is
* possible for a {@link SchemaFactory} to expose a feature value but
* to be unable to change the current value.</p>
*
* <p>All implementations are required to support the {@link javax.xml.XMLConstants#FEATURE_SECURE_PROCESSING} feature.
* When the feature is:</p>
* <ul>
* <li>
* <code>true</code>: the implementation will limit XML processing to conform to implementation limits.
* Examples include entity expansion limits and XML Schema constructs that would consume large amounts of resources.
* If XML processing is limited for security reasons, it will be reported via a call to the registered
* {@link ErrorHandler#fatalError(SAXParseException exception)}.
* See {@link #setErrorHandler(ErrorHandler errorHandler)}.
* </li>
* <li>
* <code>false</code>: the implementation will processing XML according to the XML specifications without
* regard to possible implementation limits.
* </li>
* </ul>
*
* @param name The feature name, which is a non-null fully-qualified URI.
* @param value The requested value of the feature (true or false).
*
* @exception org.xml.sax.SAXNotRecognizedException If the feature
* value can't be assigned or retrieved.
* @exception org.xml.sax.SAXNotSupportedException When the
* {@link SchemaFactory} recognizes the feature name but
* cannot set the requested value.
* @exception NullPointerException
* if the name parameter is null.
*
* @see #getFeature(String)
*/
public void setFeature(String name, boolean value) throws SAXNotRecognizedException, SAXNotSupportedException {
if (name == null) {
throw new NullPointerException("the name parameter is null");
}
throw new SAXNotRecognizedException(name);
}
Set the value of a property.
The property name is any fully-qualified URI. It is possible for a SchemaFactory
to recognize a property name but to be unable to change the current value.
SchemaFactory
s are not required to recognize setting any specific property names.
Params: - name – The property name, which is a non-null fully-qualified URI.
- object – The requested value for the property.
Throws: - SAXNotRecognizedException – If the property
value can't be assigned or retrieved.
- SAXNotSupportedException – When the
SchemaFactory
recognizes the property name but cannot set the requested value. - NullPointerException –
if the name parameter is null.
/**
* Set the value of a property.
*
* <p>The property name is any fully-qualified URI. It is
* possible for a {@link SchemaFactory} to recognize a property name but
* to be unable to change the current value.</p>
*
* <p>{@link SchemaFactory}s are not required to recognize setting
* any specific property names.</p>
*
* @param name The property name, which is a non-null fully-qualified URI.
* @param object The requested value for the property.
* @exception org.xml.sax.SAXNotRecognizedException If the property
* value can't be assigned or retrieved.
* @exception org.xml.sax.SAXNotSupportedException When the
* {@link SchemaFactory} recognizes the property name but
* cannot set the requested value.
* @exception NullPointerException
* if the name parameter is null.
*/
public void setProperty(String name, Object object) throws SAXNotRecognizedException, SAXNotSupportedException {
if (name == null) {
throw new NullPointerException("the name parameter is null");
}
throw new SAXNotRecognizedException(name);
}
Look up the value of a property.
The property name is any fully-qualified URI. It is possible for a SchemaFactory
to recognize a property name but temporarily be unable to return its value.
SchemaFactory
s are not required to recognize any specific property names.
Implementors are free (and encouraged) to invent their own properties,
using names built on their own URIs.
Params: - name – The property name, which is a non-null fully-qualified URI.
Throws: - SAXNotRecognizedException – If the property
value can't be assigned or retrieved.
- SAXNotSupportedException – When the
XMLReader recognizes the property name but
cannot determine its value at this time.
- NullPointerException –
if the name parameter is null.
See Also: Returns: The current value of the property.
/**
* Look up the value of a property.
*
* <p>The property name is any fully-qualified URI. It is
* possible for a {@link SchemaFactory} to recognize a property name but
* temporarily be unable to return its value.</p>
*
* <p>{@link SchemaFactory}s are not required to recognize any specific
* property names.</p>
*
* <p>Implementors are free (and encouraged) to invent their own properties,
* using names built on their own URIs.</p>
*
* @param name The property name, which is a non-null fully-qualified URI.
* @return The current value of the property.
* @exception org.xml.sax.SAXNotRecognizedException If the property
* value can't be assigned or retrieved.
* @exception org.xml.sax.SAXNotSupportedException When the
* XMLReader recognizes the property name but
* cannot determine its value at this time.
* @exception NullPointerException
* if the name parameter is null.
* @see #setProperty(String, Object)
*/
public Object getProperty(String name) throws SAXNotRecognizedException, SAXNotSupportedException {
if (name == null) {
throw new NullPointerException("the name parameter is null");
}
throw new SAXNotRecognizedException(name);
}
Sets the ErrorHandler
to receive errors encountered during the newSchema
method invocation.
Error handler can be used to customize the error handling process during schema parsing. When an ErrorHandler
is set, errors found during the parsing of schemas will be first sent to the ErrorHandler
.
The error handler can abort the parsing of a schema immediately by throwing SAXException
from the handler. Or for example it can print an error to the screen and try to continue the processing by returning normally from the ErrorHandler
If any Throwable
(or instances of its derived classes) is thrown from an ErrorHandler
, the caller of the newSchema
method will be thrown the same Throwable
object.
SchemaFactory
is not allowed to throw SAXException
without first reporting it to ErrorHandler
.
Applications can call this method even during a Schema
is being parsed.
When the ErrorHandler
is null, the implementation will behave as if the following ErrorHandler
is set:
class DraconianErrorHandler implements ErrorHandler
{ public void fatalError( SAXParseException
e ) throws SAXException
{ throw e; } public void error( SAXParseException
e ) throws SAXException
{ throw e; } public void warning( SAXParseException
e ) throws SAXException
{ // noop } }
When a new SchemaFactory
object is created, initially this field is set to null. This field will NOT be inherited to Schema
s, Validator
s, or ValidatorHandler
s that are created from this SchemaFactory
.
Params: - errorHandler –
A new error handler to be set. This parameter can be null.
/**
* Sets the {@link ErrorHandler} to receive errors encountered
* during the <code>newSchema</code> method invocation.
*
* <p>
* Error handler can be used to customize the error handling process
* during schema parsing. When an {@link ErrorHandler} is set,
* errors found during the parsing of schemas will be first sent
* to the {@link ErrorHandler}.
*
* <p>
* The error handler can abort the parsing of a schema immediately
* by throwing {@link SAXException} from the handler. Or for example
* it can print an error to the screen and try to continue the
* processing by returning normally from the {@link ErrorHandler}
*
* <p>
* If any {@link Throwable} (or instances of its derived classes)
* is thrown from an {@link ErrorHandler},
* the caller of the <code>newSchema</code> method will be thrown
* the same {@link Throwable} object.
*
* <p>
* {@link SchemaFactory} is not allowed to
* throw {@link SAXException} without first reporting it to
* {@link ErrorHandler}.
*
* <p>
* Applications can call this method even during a {@link Schema}
* is being parsed.
*
* <p>
* When the {@link ErrorHandler} is null, the implementation will
* behave as if the following {@link ErrorHandler} is set:
* <pre>
* class DraconianErrorHandler implements {@link ErrorHandler} {
* public void fatalError( {@link org.xml.sax.SAXParseException} e ) throws {@link SAXException} {
* throw e;
* }
* public void error( {@link org.xml.sax.SAXParseException} e ) throws {@link SAXException} {
* throw e;
* }
* public void warning( {@link org.xml.sax.SAXParseException} e ) throws {@link SAXException} {
* // noop
* }
* }
* </pre>
*
* <p>
* When a new {@link SchemaFactory} object is created, initially
* this field is set to null. This field will <em>NOT</em> be
* inherited to {@link Schema}s, {@link Validator}s, or
* {@link ValidatorHandler}s that are created from this {@link SchemaFactory}.
*
*
* @param errorHandler
* A new error handler to be set. This parameter can be null.
*/
public abstract void setErrorHandler(ErrorHandler errorHandler);
Gets the current ErrorHandler
set to this SchemaFactory
. See Also: Returns: This method returns the object that was last set through the setErrorHandler(ErrorHandler)
method, or null if that method has never been called since this SchemaFactory
has created.
/**
* Gets the current {@link ErrorHandler} set to this {@link SchemaFactory}.
*
* @return
* This method returns the object that was last set through
* the {@link #setErrorHandler(ErrorHandler)} method, or null
* if that method has never been called since this {@link SchemaFactory}
* has created.
*
* @see #setErrorHandler(ErrorHandler)
*/
public abstract ErrorHandler getErrorHandler();
Sets the LSResourceResolver
to customize resource resolution when parsing schemas. SchemaFactory
uses a LSResourceResolver
when it needs to locate external resources while parsing schemas, although exactly what constitutes "locating external resources" is up to each schema language. For example, for W3C XML Schema, this includes files <include>d or <import>ed,
and DTD referenced from schema files, etc.
Applications can call this method even during a Schema
is being parsed.
When the LSResourceResolver
is null, the implementation will behave as if the following LSResourceResolver
is set:
class DumbDOMResourceResolver implements LSResourceResolver
{ public LSInput
resolveResource( String publicId, String systemId, String baseURI) { return null; // always return null } }
If a LSResourceResolver
throws a RuntimeException
(or instances of its derived classes), then the SchemaFactory
will abort the parsing and the caller of the newSchema
method will receive the same RuntimeException
.
When a new SchemaFactory
object is created, initially this field is set to null. This field will NOT be inherited to Schema
s, Validator
s, or ValidatorHandler
s that are created from this SchemaFactory
.
Params: - resourceResolver –
A new resource resolver to be set. This parameter can be null.
/**
* Sets the {@link LSResourceResolver} to customize
* resource resolution when parsing schemas.
*
* <p>
* {@link SchemaFactory} uses a {@link LSResourceResolver}
* when it needs to locate external resources while parsing schemas,
* although exactly what constitutes "locating external resources" is
* up to each schema language. For example, for W3C XML Schema,
* this includes files <tt><include></tt>d or <tt><import></tt>ed,
* and DTD referenced from schema files, etc.
*
* <p>
* Applications can call this method even during a {@link Schema}
* is being parsed.
*
* <p>
* When the {@link LSResourceResolver} is null, the implementation will
* behave as if the following {@link LSResourceResolver} is set:
* <pre>
* class DumbDOMResourceResolver implements {@link LSResourceResolver} {
* public {@link org.w3c.dom.ls.LSInput} resolveResource(
* String publicId, String systemId, String baseURI) {
*
* return null; // always return null
* }
* }
* </pre>
*
* <p>
* If a {@link LSResourceResolver} throws a {@link RuntimeException}
* (or instances of its derived classes),
* then the {@link SchemaFactory} will abort the parsing and
* the caller of the <code>newSchema</code> method will receive
* the same {@link RuntimeException}.
*
* <p>
* When a new {@link SchemaFactory} object is created, initially
* this field is set to null. This field will <em>NOT</em> be
* inherited to {@link Schema}s, {@link Validator}s, or
* {@link ValidatorHandler}s that are created from this {@link SchemaFactory}.
*
* @param resourceResolver
* A new resource resolver to be set. This parameter can be null.
*/
public abstract void setResourceResolver(LSResourceResolver resourceResolver);
Gets the current LSResourceResolver
set to this SchemaFactory
. See Also: Returns: This method returns the object that was last set through the setResourceResolver(LSResourceResolver)
method, or null if that method has never been called since this SchemaFactory
has created.
/**
* Gets the current {@link LSResourceResolver} set to this {@link SchemaFactory}.
*
* @return
* This method returns the object that was last set through
* the {@link #setResourceResolver(LSResourceResolver)} method, or null
* if that method has never been called since this {@link SchemaFactory}
* has created.
*
* @see #setErrorHandler(ErrorHandler)
*/
public abstract LSResourceResolver getResourceResolver();
Parses the specified source as a schema and returns it as a schema.
This is a convenience method for newSchema(Source[] schemas)
.
Params: - schema – Source that represents a schema.
Throws: - SAXException – If a SAX error occurs during parsing.
- NullPointerException – if schema is null.
Returns: New Schema
from parsing schema
.
/**
* <p>Parses the specified source as a schema and returns it as a schema.</p>
*
* <p>This is a convenience method for {@link #newSchema(Source[] schemas)}.</p>
*
* @param schema Source that represents a schema.
*
* @return New <code>Schema</code> from parsing <code>schema</code>.
*
* @throws SAXException If a SAX error occurs during parsing.
* @throws NullPointerException if <tt>schema</tt> is null.
*/
public Schema newSchema(Source schema) throws SAXException {
return newSchema(new Source[]{schema});
}
Parses the specified File
as a schema and returns it as a Schema
.
This is a convenience method for newSchema(Source schema)
.
Params: - schema – File that represents a schema.
Throws: - SAXException – If a SAX error occurs during parsing.
- NullPointerException – if schema is null.
Returns: New Schema
from parsing schema
.
/**
* <p>Parses the specified <code>File</code> as a schema and returns it as a <code>Schema</code>.</p>
*
* <p>This is a convenience method for {@link #newSchema(Source schema)}.</p>
*
* @param schema File that represents a schema.
*
* @return New <code>Schema</code> from parsing <code>schema</code>.
*
* @throws SAXException If a SAX error occurs during parsing.
* @throws NullPointerException if <tt>schema</tt> is null.
*/
public Schema newSchema(File schema) throws SAXException {
return newSchema(new StreamSource(schema));
}
Parses the specified URL
as a schema and returns it as a Schema
.
This is a convenience method for newSchema(Source schema)
.
Params: - schema –
URL
that represents a schema.
Throws: - SAXException – If a SAX error occurs during parsing.
- NullPointerException – if schema is null.
Returns: New Schema
from parsing schema
.
/**
* <p>Parses the specified <code>URL</code> as a schema and returns it as a <code>Schema</code>.</p>
*
* <p>This is a convenience method for {@link #newSchema(Source schema)}.</p>
*
* @param schema <code>URL</code> that represents a schema.
*
* @return New <code>Schema</code> from parsing <code>schema</code>.
*
* @throws SAXException If a SAX error occurs during parsing.
* @throws NullPointerException if <tt>schema</tt> is null.
*/
public Schema newSchema(URL schema) throws SAXException {
return newSchema(new StreamSource(schema.toExternalForm()));
}
Parses the specified source(s) as a schema and returns it as a schema.
The callee will read all the Source
s and combine them into a single schema. The exact semantics of the combination depends on the schema language that this SchemaFactory
object is created for.
When an ErrorHandler
is set, the callee will report all the errors found in sources to the handler. If the handler throws an exception, it will abort the schema compilation and the same exception will be thrown from this method. Also, after an error is reported to a handler, the callee is allowed to abort the further processing by throwing it. If an error handler is not set, the callee will throw the first error it finds in the sources.
W3C XML Schema 1.0
The resulting schema contains components from the specified sources.
The same result would be achieved if all these sources were
imported, using appropriate values for schemaLocation and namespace,
into a single schema document with a different targetNamespace
and no components of its own, if the import elements were given
in the same order as the sources. Section 4.2.3 of the XML Schema
recommendation describes the options processors have in this
regard. While a processor should be consistent in its treatment of
JAXP schema sources and XML Schema imports, the behaviour between
JAXP-compliant parsers may vary; in particular, parsers may choose
to ignore all but the first <import> for a given namespace,
regardless of information provided in schemaLocation.
If the parsed set of schemas includes error(s) as specified in the section 5.1 of the XML Schema spec, then the error must be reported to the ErrorHandler
.
RELAX NG
For RELAX NG, this method must throw UnsupportedOperationException
if schemas.length!=1.
Params: - schemas – inputs to be parsed.
SchemaFactory
is required to recognize StreamSource
, SAXSource
, DOMSource
and StAXSource
.
Throws: - SAXException – If an error is found during processing the specified inputs. When an
ErrorHandler
is set, errors are reported to there first. See setErrorHandler(ErrorHandler)
. - NullPointerException –
If the
schemas
parameter itself is null or
any item in the array is null. - IllegalArgumentException –
If any item in the array is not recognized by this method.
- UnsupportedOperationException –
If the schema language doesn't support this operation.
Returns: Always return a non-null valid Schema
object. Note that when an error has been reported, there is no guarantee that the returned Schema
object is meaningful.
/**
* Parses the specified source(s) as a schema and returns it as a schema.
*
* <p>
* The callee will read all the {@link Source}s and combine them into a
* single schema. The exact semantics of the combination depends on the schema
* language that this {@link SchemaFactory} object is created for.
*
* <p>
* When an {@link ErrorHandler} is set, the callee will report all the errors
* found in sources to the handler. If the handler throws an exception, it will
* abort the schema compilation and the same exception will be thrown from
* this method. Also, after an error is reported to a handler, the callee is allowed
* to abort the further processing by throwing it. If an error handler is not set,
* the callee will throw the first error it finds in the sources.
*
* <h2>W3C XML Schema 1.0</h2>
* <p>
* The resulting schema contains components from the specified sources.
* The same result would be achieved if all these sources were
* imported, using appropriate values for schemaLocation and namespace,
* into a single schema document with a different targetNamespace
* and no components of its own, if the import elements were given
* in the same order as the sources. Section 4.2.3 of the XML Schema
* recommendation describes the options processors have in this
* regard. While a processor should be consistent in its treatment of
* JAXP schema sources and XML Schema imports, the behaviour between
* JAXP-compliant parsers may vary; in particular, parsers may choose
* to ignore all but the first <import> for a given namespace,
* regardless of information provided in schemaLocation.
*
* <p>
* If the parsed set of schemas includes error(s) as
* specified in the section 5.1 of the XML Schema spec, then
* the error must be reported to the {@link ErrorHandler}.
*
* <h2>RELAX NG</h2>
*
* <p>For RELAX NG, this method must throw {@link UnsupportedOperationException}
* if <tt>schemas.length!=1</tt>.
*
*
* @param schemas
* inputs to be parsed. {@link SchemaFactory} is required
* to recognize {@link StreamSource},
* {@link javax.xml.transform.sax.SAXSource},
* {@link javax.xml.transform.dom.DOMSource}
* and {@link javax.xml.transform.stax.StAXSource}.
*
* @return
* Always return a non-null valid {@link Schema} object.
* Note that when an error has been reported, there is no
* guarantee that the returned {@link Schema} object is
* meaningful.
*
* @throws SAXException
* If an error is found during processing the specified inputs.
* When an {@link ErrorHandler} is set, errors are reported to
* there first. See {@link #setErrorHandler(ErrorHandler)}.
* @throws NullPointerException
* If the <code>schemas</code> parameter itself is null or
* any item in the array is null.
* @throws IllegalArgumentException
* If any item in the array is not recognized by this method.
* @throws UnsupportedOperationException
* If the schema language doesn't support this operation.
*/
public abstract Schema newSchema(Source[] schemas) throws SAXException;
Creates a special Schema
object. The exact semantics of the returned Schema
object depends on the schema language that this SchemaFactory
is created for.
Also, implementations are allowed to use implementation-specific
property/feature to alter the semantics of this method.
W3C XML Schema 1.0
For XML Schema, this method creates a Schema
object that performs validation by using location hints specified in documents.
The returned Schema
object assumes that if documents refer to the same URL in the schema location hints, they will always resolve to the same schema document. This assumption allows implementations to reuse parsed results of schema documents so that multiple validations against the same schema will run faster.
Note that the use of schema location hints introduces a
vulnerability to denial-of-service attacks.
RELAX NG
RELAX NG does not support this operation.
Throws: - UnsupportedOperationException –
If this operation is not supported by the callee.
- SAXException –
If this operation is supported but failed for some reason.
Returns: Always return non-null valid Schema
object.
/**
* Creates a special {@link Schema} object.
*
* <p>
* The exact semantics of the returned {@link Schema} object depends
* on the schema language that this {@link SchemaFactory} is created
* for.
*
* <p>
* Also, implementations are allowed to use implementation-specific
* property/feature to alter the semantics of this method.
*
*
* <h2>W3C XML Schema 1.0</h2>
* <p>
* For XML Schema, this method creates a {@link Schema} object that
* performs validation by using location hints specified in documents.
*
* <p>
* The returned {@link Schema} object assumes that if documents
* refer to the same URL in the schema location hints,
* they will always resolve to the same schema document. This
* assumption allows implementations to reuse parsed results of
* schema documents so that multiple validations against the same
* schema will run faster.
*
* <p>
* Note that the use of schema location hints introduces a
* vulnerability to denial-of-service attacks.
*
*
* <h2>RELAX NG</h2>
* <p>
* RELAX NG does not support this operation.
*
* @return
* Always return non-null valid {@link Schema} object.
*
* @throws UnsupportedOperationException
* If this operation is not supported by the callee.
* @throws SAXException
* If this operation is supported but failed for some reason.
*/
public abstract Schema newSchema() throws SAXException;
}